Rutan Solitaire

Last updated

Solitaire
Rutan 77 Solitaire N142SD.jpg
Role Kit-built motor glider
National origin United States
Manufacturer Rutan Aircraft Factory
Designer Burt Rutan
First flight1982
Introduction1982
StatusProduction completed

The Rutan Model 77 Solitaire is an American, single seat, canard, mid-wing motor glider that was developed by Burt Rutan in response to the 1982 Sailplane Homebuilders Association Design Contest for a homebuilt glider. It first flew in 1982. [1] The Solitaire was declared the winner of the contest and its unusual layout attracted a great deal of attention. For a time in the 1980s the aircraft was available as plans and as a kit. [2] [3]

Contents

Design and development

Like many Rutan designs, the Solitaire uses a canard layout, with a lifting foreplane with elevators for pitch control at the nose, and a rudder at the rear of a tail boom. The pilot sits under a bubble canopy and the electro-hydraulically retractable gasoline engine occupies the space between the pilot's feet and the canard. The aircraft is constructed from fiberglass on Nomex honeycomb and urethane foam. [2] [3]

The 41.75 ft (12.7 m) wing has a built-in mid-span twist to offset the effects of the canard's downwash, with the inboard 7.4 ft (2.3 m) having 2 degrees less twist than the outboard portion of the wing. The wing is equipped with very effective trailing edge spoilers, consisting of a flap that deploys down while also protruding its leading edge upward into the airflow. [2] [3]

The canard configuration is designed so that the forward surface stalls before the main wing, making the aircraft unstallable, and also unspinnable. This does not mean, however, that the aircraft cannot be maneuvered into a flight regime where a high rate of descent is achieved. [2] [3]

When it was in production, the kit included all the hardware to assemble the prefabricated fiberglass parts. The fuselage halves came with Nomex honeycomb cores and a special film adhesive to bond the halves together. The main wing spars supplied used S-glass roving spar caps that had been molded in metal molds. The kits also included many molded parts, including the seat pan, canopy pre-mounted in its frame, turtledeck, fuselage bulkheads, wing root fairings, wheel fairings, wingtips and the foam cores used in the wings and the canard. [4]

The initial engine was the 22 hp (16 kW) Zenoah G-25, but this was changed to a Robin engine and then later the 20 hp (15 kW) Cuyuna 215. The KFM 107e 22 hp (16 kW) engine has also been used. [4] [5]

Operational history

Within two months of the aircraft's introduction in 1982, 50 to 60 sets of plans had been sold. In March 2011 there were seven Solitaires registered in the United States, including one in the EAA AirVenture Museum. [3] [6]

Aircraft on display

Specifications (Solitaire)

Data from Sailplane Directory, Soaring and EAA [2] [3] [4]

General characteristics

Performance

See also

Related Research Articles

The Advanced Soaring Concepts Falcon, also called the Advanced Soaring Concepts American Falcon, is an American mid-wing, T-tailed, single-seat, FAI 15-Metre Class glider that was designed by Tor Jensen and produced by Advanced Soaring Concepts, and first flew in 1993. The aircraft was produced as a kit for amateur construction.

<span class="mw-page-title-main">Rutan Quickie</span> Light aircraft designed by Burt Rutan

The Rutan Model 54 Quickie is a lightweight single-seat taildragger aircraft of composite construction, configured with tandem wings.

<span class="mw-page-title-main">Cozy MK IV</span> Type of aircraft

The Cozy Mark IV is a 4-seat, single engine, homebuilt light aircraft designed by Nat Puffer, with parts and plans supplied by Aircraft Spruce & Specialty Co. The aircraft is built from plans using basic raw materials. It is not a kit aircraft, though many small parts are available prefabricated. The Cozy is similar in design and construction to the 2-seat Rutan Long-EZ, from which it is derived, with approval from Burt Rutan.

<span class="mw-page-title-main">Berkut 360</span> Type of aircraft

The Berkut 360 is a tandem-seating, two-seat homebuilt canard aircraft with pusher configuration and retractable landing gear, built primarily of carbon fiber and fiberglass.

<span class="mw-page-title-main">Cozy III</span> Type of aircraft

The Cozy III is a 3-seat, single engine, homebuilt light aircraft designed by Nat Puffer. The aircraft is built from plans using basic raw materials. It is not a kit aircraft, though many small parts are available prefabricated. The Cozy is similar in design and construction to the 2-seat Rutan Long-EZ, from which it is derived, with approval from Burt Rutan.

<span class="mw-page-title-main">Pterodactyl Ascender</span> American ultralight aircraft

The Pterodactyl Ascender is a family of U.S. designed and built ultralight aircraft that were sold in kit form between 1979 and 1984 under Pterodactyl Limited and is currently being sold by DFE Ultralights.

<span class="mw-page-title-main">Schreder HP-18</span> American glider

The HP-18 is a Richard Schreder-designed metal Racing Class sailplane that was offered as a kit for homebuilding during the 1970s and 1980s.

<span class="mw-page-title-main">IS-5 Kaczka</span> Type of aircraft

The IS-5 Kaczka was a single-seat canard research glider designed and built in Poland from 1948.

The Applebay Zia is an American, single-seat, high-wing, twin-boom, pusher configuration motor glider that was designed by George Applebay for the 1982 Sailplane Homebuilders Association Homebuilt Sailplane Design Contest. The aircraft was intended to be offered as a factory completed aircraft or as a kit. It first flew in 1982.

<span class="mw-page-title-main">Haig Minibat</span> American glider

The Haig Minibat is a high-wing, single-seat tailless motor glider that was designed by Larry Haig, and first flown in 1979. At one time available as plans or in kit form for amateur construction. The kit is no longer available.

<span class="mw-page-title-main">Laister LP-15 Nugget</span> American glider

The Laister LP-15 Nugget is an American single-seat, high-wing glider designed by Jack and Bill Laister for the FAI Standard Class. It first flew in 1971.

<span class="mw-page-title-main">Schreder Airmate HP-10</span> American glider

The Schreder Airmate HP-10 is an American, high wing, single seat, FAI Standard Class glider that was designed by Richard Schreder. Airmate was the name of Schreder's design company.

The Schreder HP-19 is an American, high-wing, T-tail, single seat glider designed by Richard Schreder.

<span class="mw-page-title-main">Johnson RHJ-6 Adastra</span> American glider

The Johnson RHJ-6 Adastra was an American mid-wing, two-seat glider that was designed and constructed by Dick Johnson and first flown on 3 April 1960.

The Maupin Windrose is an American high-wing, single-seat glider and motor glider that was designed by Jim Maupin for the Sailplane Homebuilders Association Design Contest.

<span class="mw-page-title-main">Radab Windex</span> Swedish glider family

The Radab Windex is a family of Swedish high-wing, single-seat aerobatic gliders and motor gliders that was designed by Sven Olof Ridder and produced initially by Radab and later by WindexAir AB as a kit for amateur construction.

The Goldwing Ltd Goldwing is an American ultralight aircraft that was designed by Craig Catto and Brian Glenn and produced by Goldwing Ltd. The aircraft was supplied as a complete factory-built aircraft only and no kits or plans were offered.

<span class="mw-page-title-main">Mitchell Wing B-10</span> American ultralight aircraft

The Mitchell Wing B-10 is an American high-wing, open cockpit, single-seat, tailless, ultralight aircraft and motor glider designed by Don Mitchell and based on his Mitchell Wing hang-glider. It has been produced by a variety of companies in the form of kits and plans for amateur construction. It first flew in 1980.

<span class="mw-page-title-main">QAC Quickie Q2</span> American homebuilt aircraft design

The Quickie Q2 or Q2 is a two-seat version of the unique Rutan Quickie, produced in kit form by the Quickie Aircraft Corporation founded by Tom Jewett and Gene Sheehan. Canadian Garry LeGare was involved in the design.

John Gregory Roncz was an American aerodynamicist involved in the development of over 50 different aircraft, ranging from ultralights, round-the world record breakers and military transports, to yachts and a racing car. He was described by Burt Rutan, the prolific aircraft creator, as "the genius of airfoil design"

References

  1. ↑ "J2mcL Planeurs - Fiche planeur n°". www.j2mcl-planeurs.net. Retrieved May 21, 2022.
  2. 1 2 3 4 5 Activate Media (2006). "Solitaire Rutan". Archived from the original on July 15, 2011. Retrieved March 14, 2011.
  3. 1 2 3 4 5 6 Said, Bob: 1983 Sailplane Directory, Soaring Magazine , page 126. Soaring Society of America, November 1983. USPS 499-920
  4. 1 2 3 4 Experimental Aircraft Association (2011). "Rutan-Matheny Solitaire – N142SD" . Retrieved March 14, 2011.
  5. ↑ Experimental Aircraft Association (2011). "Rutan-Matheny Solitaire – N142SD Specifications" . Retrieved March 14, 2011.
  6. ↑ Federal Aviation Administration (March 2011). "Make / Model Inquiry Results". Archived from the original on July 21, 2011. Retrieved March 14, 2011.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.