SIAI S.58

Last updated
SIAI S.58
SIAI S.58.jpg
Role Flying boat fighter
National origin Italy
Manufacturer SIAI
First flight 1924
Primary user Italy
Number builtca. 5

The SIAI S.58 or Savoia-Marchetti S.M.58 was an Italian flying boat fighter prototype of the 1920s designed and manufactured by SIAI.

Contents

Design and development

S.58

In 1924, the Regia Marina (Italian Royal Navy) issued a requirement for a replacement for its Macchi M.7ter flying boat fighter. To compete with the Macchi M.26 for a production order as the replacement, SIAI developed the S.58. It was a wooden, single-seat, single-bay biplane with a hull based on that of the SIAI S.51 racing flying boat which had participated in the 1922 Schneider Trophy race. The S.58's engine, a 221-kilowatt (296-brake horsepower) Hispano-Suiza HS 42 V8 driving a pusher propeller, was mounted on struts above the hull. SIAI proposed an armament of two fixed, forward-firing 7.7-millimeter (0.303-inch) Vickers machine guns mounted on the hull on either side of the cockpit. [1]

The S.58 made its first flight early in the summer of 1924 and on 25 August 1924 set a world altitude record for aircraft of its type by reaching 5,831 meters (19,130 feet) with a payload of 250 kilograms (551 pounds). SIAI built three prototypes, but the Regia Marina opted to save money by re-engining the Macchi M.7ter to extend its service life rather than purchase a new aircraft. SIAI did, however, build at least one more S.58, which the Scuola di Alta Velocità (High Speed School) at Desenzano used. [2]

S.58bis

SIAI later fitted the first S.58 prototype with a 313-kilowatt (420-horsepower) Fiat A.20 V12, redesignating the re-engined aircraft the S.58bis. In 1927, the Regia Marina again held a contest for a replacement for the Macchi M.7ter, and SIAI entered the S.58bis. The Regia Marina found it impressive enough to make plans to procure 97 S.58bis aircraft, but these plans were cancelled when the Regia Marina again chose as an economy measure to extend the M.7ter's service life by re-engining it, and no production order materialized for the S.58bis. [3]

S.58ter

In the autumn of 1928, the S.58ter, a slightly modified S.58bis also employing the Fiat A 20 V12 engine, flew for the first time. In 1929, the Regia Marina again organized a contest for an M.7ter replacement, and SIAI entered the S.58ter. The S.58ter lost out to the Macchi M.41bis and did not win a production order. [4]

Operators

Flag of Italy (1861-1946) crowned.svg  Kingdom of Italy

Specifications (S.58bis)

Data from Green, William, and Gordon Swanborough The Complete Book of Fighters: An Illustrated Encyclopedia of Every Fighter Aircraft Built and Flown, New York: SMITHMARK Publishers, 1994, ISBN   0-8317-3939-8

General characteristics

Performance

Armament

Notes:

See also

Aircraft of comparable role, configuration, and era

Related lists

Notes

  1. Green and Swanborough, p. 527.
  2. Green and Swanborough, p. 527.
  3. Green and Swanborough, p. 527.
  4. Green and Swanborough, p. 527.

Related Research Articles

SIAI-Marchetti was an Italian aircraft manufacturer primarily active during the interwar period.

<span class="mw-page-title-main">Fiat G.55 Centauro</span> Type of aircraft

The Fiat G.55 Centauro was a single-engine single-seat World War II fighter aircraft used by the Regia Aeronautica and the Aeronautica Nazionale Repubblicana in 1943–1945. It was designed and built in Turin by Fiat. The Fiat G.55 was arguably the best type produced in Italy during World War II, but it did not enter production until 1943, when, after comparative tests against the Messerschmitt Bf 109G and the Focke-Wulf 190, the Luftwaffe itself regarded the Fiat G.55 as "the best Axis fighter".

<span class="mw-page-title-main">Fiat CR.25</span> Type of aircraft

The Fiat CR.25 was an Italian twin-engine reconnaissance-fighter aircraft which served in small numbers for the Regia Aeronautica during World War II.

<span class="mw-page-title-main">Fiat CR.20</span> Type of aircraft

The Fiat CR.20 was an Italian biplane fighter used during the 1920s and 1930s. Designed by Celestino Rosatelli, it represented an intermediate step from the early biplane CR.1 and the later, successful series CR.30, CR.32 and CR.42.

<span class="mw-page-title-main">Caproni Vizzola F.5</span> Italian fighter

The Caproni Vizzola F.5 was an Italian fighter aircraft that was built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.

<span class="mw-page-title-main">IMAM Ro.51</span> Italian fighter prototype

The IMAM Ro.51 was an Italian fighter aircraft that first flew in 1937. It was designed for the 1936 new fighter contest for the Regia Aeronautica, with practically all the Italian aircraft builders involved.

<span class="mw-page-title-main">IMAM Ro.57</span> Italian fighter/attack aircraft

The IMAM Ro.57 was an Italian twin-engined, single-seat monoplane fighter of the Regia Aeronautica. Based on a 1939 design by Giovanni Galasso the aircraft did not enter production until 1943.

<span class="mw-page-title-main">CANT 25</span> Type of aircraft

The CANT 25 was an Italian shipboard single-seat sesquiplane flying boat fighter that entered service with the Regia Aeronautica in 1931.

<span class="mw-page-title-main">Macchi M.5</span> Type of aircraft

The Macchi M.5 was an Italian single-seat fighter flying boat designed and built by Nieuport-Macchi at Varese. It was extremely manoeuvrable and agile and matched the land-based aircraft it had to fight.

<span class="mw-page-title-main">SIAI S.13</span> Type of aircraft

The SIAI S.13 was an Italian biplane reconnaissance flying-boat from 1919.

<span class="mw-page-title-main">SIAI S.52</span> Type of aircraft

The SIAI S.52 was an Italian fighter prototype of 1924.

<span class="mw-page-title-main">Gabardini G.9</span> Type of aircraft

The Gabardini G.9 was an Italian single-seat biplane fighter prototype produced by Gabardini in 1923.

<span class="mw-page-title-main">Marchetti MVT</span> Type of aircraft

The Marchetti MVT, later renamed SIAI S.50, was an Italian fighter of 1919 and the early 1920s.

<span class="mw-page-title-main">SIAI S.67</span> Italian flying boat fighter

The SIAI S.67 or Savoia Marchetti SM.67 was an Italian flying boat fighter of the early 1930s designed and manufactured by SIAI.

<span class="mw-page-title-main">Macchi M.26</span> Italian flying boat prototype

The Macchi M.26 was an Italian flying boat fighter prototype of 1924 designed and manufactured by Macchi.

<span class="mw-page-title-main">Macchi M.41</span> Type of aircraft

The Macchi M.41 was an Italian flying boat fighter prototype of 1927 designed and manufactured by Macchi. Its production model, the M.41bis, first flown in 1929, was in front line service from 1930 to 1938.

<span class="mw-page-title-main">Macchi M.71</span> Italian flying boat fighter

The Macchi M.71 was an Italian flying boat fighter of the 1930s designed and manufactured by Macchi.

<span class="mw-page-title-main">Macchi M.6</span> Type of aircraft

The Macchi M.6 was an Italian flying boat fighter prototype of 1917.

<span class="mw-page-title-main">SIAI S.51</span> Type of aircraft

The SIAI S.51, Savoia Marchetti S.51 or Savoia S.51 was an Italian racing flying boat built by SIAI for the 1922 Schneider Trophy race.

<span class="mw-page-title-main">Piaggio Stella P.IX</span> Italian nine-cylinder radial aircraft engine

The Piaggio P.IX, or Piaggio Stella P.IX, was an Italian nine-cylinder radial aircraft engine produced by Rinaldo Piaggio S.p.A. Based on the Gnome-Rhône 9K, the engine was rated at 600 hp (447 kW). Production was used to power a number of other aircraft developed in Italy. The main users were the Savoia-Marchetti SM.81 transport and the IMAM Ro.37bis, the main reconnaissance aircraft in the Regia Aeronautica during the Second Italo-Ethiopian War, Spanish Civil War and Second World War, but the engine was also used by other designs, including the prototype Savoia-Marchetti SM.79.

References