| Marchetti MVT/SIAI S.50 | |
|---|---|
 | |
| The Marchetti MVT after its 1922 redesignation as the SIAI S.50. | |
| Role | Fighter |
| National origin | Italy |
| Manufacturer | Vickers-Terni and SIAI |
| Designer | Alessandro Marchetti (1884-1966) |
| First flight | 1919 |
| Primary user | Corpo Aeronautico Militare Regia Aeronautica (Italian Royal Air Force) |
| Number built | 3 |
The Marchetti MVT, later renamed SIAI S.50, was an Italian fighter of 1919 and the early 1920s.
Alessandro Marchetti (1884–1966) designed the MVT (for "Marchetti-Vickers-Terni"), a single-seat, all-metal biplane with its fuselage suspended between the upper and lower wings. The after part of the fuselage itself was flattened to serve as an airfoil. The semi-elliptical wings were extremely thin in section and employed wing warping to allow lateral control, and the aircraft had all-moving tail surfaces. [1] The MVT was powered by an SPA 6a water-cooled engine rated at 164 kilowatts (220 horsepower) driving a two-bladed propeller, and was armed with two fixed, forward-firing 7.7 millimeter (0.303-inch) Vickers machine guns synchronized to fire through the propeller. [2]
Vickers-Terni at La Spezia constructed the MVT, which first flew in 1919. On 9 December 1919, it reached a maximum speed of 250 kilometers per hour (155 miles per hour), an unofficial world speed record which was denied official status because no representatives of the Fédération Aéronautique Internationale —the world governing body for aeronautics—were present to certify the speed. [2]
In 1920, Marchetti redesigned the MVT, giving it wings of longer span and splayed interplane bracing struts, a new cabane structure, and a more powerful engine, the SPA 62a rated at 234 kilowatts (285 horsepower). In this redesigned form, the MVT underwent testing at Guidonia Montecelio, where it achieved a speed of 275 kilometers per hour (171 miles per hour). [2]
Marchetti joined the SIAI firm in 1922 as its chief designer, and at that time the MVT was renamed the SIAI S.50. Although the S.50 did not meet the specifications the Regia Aeronautica (Italian Royal Air Force) had established for entrants in the 1923 single-seat fighter contest—which specified that entrants be powered by the 224-kilowatt (300-horsepower) Hispano-Suiza HS 42 eight-cylinder water-cooled engine [3] —SIAI entered it anyway. It met a favorable enough reception for the Regia Aeronautica to acquire three aircraft for evaluation and make plans to order 12 aircraft, although in the end the 12 were never ordered or constructed. [2]
Experience with S.50 in the 1923 contest led Alessandro Marchetti to design and construct a derivative of the S.50, the SIAI S.52 fighter. [3]
One of the Regia Aeronautica's three S.50s was modified into a twin-float floatplane. [2]
Kingdom of Italy Data from Green, William, and Gordon Swanborough The Complete Book of Fighters: An Illustrated Encyclopedia of Every Fighter Aircraft Built and Flown, New York: SMITHMARK Publishers, 1994, ISBN 0-8317-3939-8
General characteristics
Performance
Armament
Notes:
Related development
The Caproni Vizzola F.5 was an Italian fighter aircraft that was built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.
The IMAM Ro.51 was an Italian fighter aircraft that first flew in 1937. It was designed for the 1936 new fighter contest for the Regia Aeronautica, with practically all the Italian aircraft builders involved.
The Caproni Ca.114 was a fighter biplane produced in Italy in the early 1930s which was flown operationally in Peru in the 1930s and 1940s.
The CANT 25 was an Italian shipboard single-seat sesquiplane flying boat fighter that entered service with the Regia Aeronautica in 1931.
The SIAI S.52 was an Italian fighter prototype of 1924.
The Caproni Ca.70 was a two-seat night fighter and ground attack biplane produced in Italy in 1925. It was the only Italian aircraft designed from the outset as a night fighter.
The Caproni Ca.71, originally Ca.70L, was a two-seat biplane night fighter produced in Italy in 1927. It was derived from the Caproni Ca.70 of 1925.
The Caproni CH.1 was a single-seat biplane fighter, a single example of which was produced as a prototype in Italy in 1935.
The Caproni Vizzola F.6 was a World War II-era Italian fighter aircraft built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear. Only two prototypes were built, one designated F.6M and the other designated F.6Z.
The Caproni Ca.331 Raffica was an Italian aircraft built by Caproni in the early 1940s as a tactical reconnaissance aircraft/light bomber and also as a night fighter.
The Piaggio P.2 was an Italian fighter prototype of advanced design built by Piaggio in 1923.
The Gabardini G.8 was an Italian single-seat aircraft produced in both fighter and trainer versions by Gabardini in 1923.
The Gabardini G.9 was an Italian single-seat biplane fighter prototype produced by Gabardini in 1923.
The SIAI S.58 or Savoia-Marchetti S.M.58 was an Italian flying boat fighter prototype of the 1920s designed and manufactured by SIAI.
The SIAI S.67 or Savoia Marchetti SM.67 was an Italian flying boat fighter of the early 1930s designed and manufactured by SIAI.
The Macchi M.26 was an Italian flying boat fighter prototype of 1924 designed and manufactured by Macchi.
The Macchi M.71 was an Italian flying boat fighter of the 1930s designed and manufactured by Macchi.
The Macchi M.6 was an Italian flying boat fighter prototype of 1917.
The Pomilio Gamma was an Italian fighter prototype of 1918.
The SIAI S.51, Savoia Marchetti S.51 or Savoia S.51 was an Italian racing flying boat built by SIAI for the 1922 Schneider Trophy race.
