| Saab V8 | |
|---|---|
 | |
| Overview | |
| Manufacturer | Valmet |
| Also called | Valmet TF |
| Layout | |
| Configuration | V8 |
| Displacement | 3,970 cc (242.3 cu in) |
| Cylinder bore | 90 mm (3.5 in) |
| Piston stroke | 78 mm (3.1 in) |
| Valvetrain | DOHC |
| Combustion | |
| Fuel type | Petrol |
| Oil system | Wet sump |
| Cooling system | Water-cooled |
The Saab V8 is a V8 engine developed for Saab Automobile by Saab-Valmet. Only five prototype engines were built, with one being extensively road tested. The V8 engine was never put into production.
When the Saab 99 model was launched in 1968, it was powered by an inline-four engine sourced from the Triumph Motor Company in the UK. The slant-four was part of a family of engines that later also included a V8. Saab evaluated the Triumph V8 in the Saab 99; 28 cars were said to have been fitted with the Triumph V8. [1] Saab did not put a V8-powered 99 into production. Instead they first brought production of the Triumph engine in-house, and then undertook two engine redesigns, the first resulting in the Saab B engine in 1972, and the second resulting in the Saab H engine in 1981.
In the 1980s Robert Sinclair, Saab-Scania's US president, worked to move the brand up-market. He said his desire was to "...add content, add performance, add sparkle and luster to the brand." [2] Sinclair felt a V8 was needed for the US market. [3]
Sinclair presented the idea to Juhani Linnoinen, director of Saab-Valmet's factory in Uusikaupunki, Finland, during a meeting in the United States. On his return home before Christmas 1987 Linnoinen assembled a small team to begin design of the engine. The team consisted of Test Department head Simo Vuorio, Hannu Häyrinen of the Prototypes Department, and Chief Mechanic Kari Kuusrainen.
Keeping costs down was an important factor, so as many existing parts were used as possible. [4] The new engine also had to fit transversely in the nose of a Saab 9000. (The Lancia Thema 8.32 of 1986 had shown that it was possible to mount a V8 in the Type Four platform also used by the 9000.) The team fabricated a test engine block out of two four-cylinder blocks joined at the crank. To fit the engine the team also designed a new gearbox case and clutch housing. [3]
In August 1988 Linnoinen contacted Jouko Tommila, head of what was then the Valmet diesel factory in Linnavuori, Finland. Linnoinen wanted Valmet to fabricate the engine. Another small team was assembled, consisting of Chief Engineer Mauno Ylivakeri, Head Designer Kalevi Salminen, Development Team Manager Timo Mäkinen, and Jarmo Kallio who was responsible for testing. [4] The team at Valmet would be responsible for building the engine and adapting the car. The engine, named the Valmet TF for Twin Four, was to be ready by the end of summer 1989.
Parts sufficient to build 10 engines were produced, and 5 complete engines were assembled. [4] The first engine assembled was run on a test bed for an extended time, with the only problem being a slight vibration of the crankshaft, which was solved by adding counterweights.
The completed engine fit into the 9000 without any body modifications, and was first taken out on the road on 3 May 1989. [3] After 6 months of testing in the Linnavuori district, during which at least one speeding ticket was received, the car was sent to Spain and Germany for additional trials. The car covered an estimated 65,000 km (40,389.1 mi) in total. [4] Reviews of the car were positive, and plans were made for a new factory to produce an anticipated 30,000 engines per year once approved. [3]
Having a large V8 engine in a Saab was felt to be at odds with the company's philosophy, and in particular Per Gillbrand, developer of Saab's famous turbocharged engine, was not enthused about the prospect of a V8 in a Saab. [4] The engine's fuel consumption was also quite high; an estimated 10 L/100 km (23.5 mpg‑US). [3]
In 1989 General Motors acquired a 50% interest in Saab, and their 54° Ellesmere V6 was subsequently used in both the 900 and 9000. The Saab V8 project was cancelled.
Three Saab V8 engines are known to exist. One is in the factory museum at Linnavuori, and two more are in the Saab museum in Uusikaupunki; one installed in a Saab 9000 and another on a stand. The remaining V8 parts were returned to the factory in Uusikaupunki, but their current location is unknown.
Apart from the badge-engineered Saab 9-7X, the only other Saab to have a factory-installed V8 was a Saab 9-5 with a prototype GM XV8 engine mounted for evaluation. [5]
The Saab V8 had a 90° included angle between cylinder banks, four camshafts, and 4 valves per cylinder for a total of 32 valves. Both cylinder heads were from the Saab B202 engine, but to arrange for intake ports on both sides of the vee to be inside the valley and exhausts to be outside, flow through one head was reversed; the intake ports became exhausts and vice versa. [4] Pistons and connecting rods were also standard Saab B202 parts. The block was cast at the Valmet Rautpohja plant in Jyväskylä. The crankshafts were machined at the Linnavuori plant. [4]
The completed engine weighed 217 kg (478.4 lb), about 60 kg (132.3 lb) heavier than the B202. It produced 280 hp (208.8 kW), and 243 ft⋅lb (330 N⋅m) of torque. [3]
The Saab 900 is a mid-sized automobile which was produced by Saab from 1978 until 1998 in two generations; the first from 1978 to 1993, and the second from 1994 to 1998.
The Saab 9-3 is a compact executive car initially developed and manufactured by the Swedish automaker Saab.
A straight-three engine is a three-cylinder piston engine where cylinders are arranged in a line along a common crankshaft.
The Saab 9000 is an automobile produced by the Swedish company Saab from 1984 to 1998. Representing the company's foray into the executive car scene, it was developed as a result of the successes of the turbocharged 99 and 900 models. The 9000 remained in production until May 1998 and it was replaced by the Saab 9-5 in late 1997, although some final cars were produced into 1998. The Saab 9000 was only available with petrol engines, in two different 5-door hatchback designs or as a 4-door notchback.
The Saab 90 is a family car from Saab made from September 1984 to 1987. It was manufactured at a facility in Uusikaupunki (Nystad), Finland, at that time owned by a joint venture with Finnish Valmet, Saab-Valmet. The 90 was a continuation of the Saab 99 and it was basically a Saab 99 from the B-pillar forward with the rear of a Saab 900 sedan. The 90, while easier to build than the 99, was still considerably more labour-intensive than the more modern 900.
The Saab 99 is a car which was produced by Saab from 1968 to 1984; their first foray into a larger class than the 96. While considered a large family car in Scandinavia, it was marketed as a niche compact executive car in most other markets. It was manufactured both in Sweden and Finland and was succeeded by the Saab 900, although the 99 continued to be produced alongside its successor. The Saab 90, an updated, less complex version using many 900 parts took over from the 99 in late 1984.
The Saab 96 is an automobile manufactured and marketed by Saab from 1960 to January 1980, replacing the 93. The 96 featured aerodynamic two-door bodywork, four-passenger seating and at first a two-stroke, three-cylinder engine, later a four-stroke V4.
The Triumph Stag is a 2+2 sports tourer which was sold between 1970 and 1978 by the British Triumph Motor Company, styled by Italian designer Giovanni Michelotti.
Saab Automobile AB was a car manufacturer that was founded in Sweden in 1945 when its parent company, Saab AB, began a project to design a small automobile. The first production model, the Saab 92, was launched in 1949. In 1968 the parent company merged with Scania-Vabis, and ten years later the Saab 900 was launched, in time becoming Saab's best-selling model. In the mid-1980s the new Saab 9000 model also appeared.
Uusikaupunki is a town and municipality of Finland. It is located in the Southwest Finland region, 71 kilometres (44 mi) northwest of Turku and 97 kilometres (60 mi) south of Pori. The municipality has a population of 14,939 and covers an area of 551.65 square kilometres (212.99 sq mi) of which 49.04 km2 (18.93 sq mi) is inland water. The population density is 29.69 inhabitants per square kilometre (76.9/sq mi).
The Simca 1307 is a large family car produced by Chrysler Europe and subsequently PSA Peugeot Citroën from 1975 to 1986. Codenamed 'C6' in development, the car was styled in the United Kingdom by Roy Axe and his team at Whitley, and the car was engineered by Simca at Poissy in France.
The Lancia Thema is an executive car produced by the Italian automaker Lancia between 1984 and 1994, and one of four cars to share the Type Four platform alongside the Alfa Romeo 164, Fiat Croma and Saab 9000. The Thema was first shown in Turin Motor Show in 1984.
The Triumph slant-four is an inline four-cylinder petrol car engine developed by the Triumph Motor Company. It first appeared in 1968 in the Saab 99. The first Triumph model to use the engine did not appear until 1972. With an original capacity of 1.7 L, displacement grew over time to 2.0 L. Triumph production ended in 1981.
The Ford flathead V8 is a V8 engine with a flat cylinder head designed by the Ford Motor Company and built by Ford and various licensees. During the engine's first decade of production, when overhead-valve engines were used by only a small minority of makes, it was usually known simply as the Ford V‑8, and the first car model in which it was installed, the Model 18, was often called simply the "Ford V-8", after its new engine. Although the V8 configuration was not new when the Ford V8 was introduced in 1932, the latter was a market first in the respect that it made an 8-cylinder affordable and a V engine affordable to the emerging mass market consumer for the first time. It was the first independently designed and built V8 engine produced by Ford for mass production, and it ranks as one of the company's most important developments. A fascination with ever-more-powerful engines was perhaps the most salient aspect of the American car and truck market for a half century, from 1923 until 1973. The engine was intended to be used for big passenger cars and trucks; it was installed in such until 1953, making the engine's 21-year production run for the U.S. consumer market longer than the 19-year run of the Ford Model T engine for that market. The engine was on Ward's list of the 10 best engines of the 20th century. It was a staple of hot rodders in the 1950s, and it remains famous in the classic car hobbies even today, despite the huge variety of other popular V8s that followed.
The MGB is a two-door sports car manufactured and marketed from 1962 until 1980 by the British Motor Corporation (BMC), later the Austin-Morris division of British Leyland, as a four-cylinder, soft-top sports car. It was announced and its details first published on 19 September 1962. Variants include the MGB GT three-door 2+2 coupé (1965–1980), the six-cylinder sports car and coupé MGC (1967–69), and the eight-cylinder 2+2 coupé, the MGB GT V8 (1973–76).
The Saab B engine is an inline four-cylinder car petrol engine developed by Saab Automobile. A redesign of the Triumph slant-four engine, the B engine displaced 2.0 L and first appeared in 1972. The B engine was used in the Saab 99 and 900 models. Saab began to phase the engine out in 1981.
The Saab H engine is a redesign of the Saab B engine, which in turn was based on the Triumph Slant-4 engine.
Valmet Automotive is a Finnish vehicle contract manufacturer and supplier of battery, roof, and kinematic systems.
The Valmet Tuuli was a trainer aircraft, developed for the Finnish Air Force by the State Aircraft Factory. The aircraft was to be produced in 3 different versions. The last version, Tuuli III was redesigned from scratch, and is basically an entirely different aircraft.
The Triumph Fury is a prototype two-door drophead coupé commissioned by the Standard-Triumph Company of Coventry, England. It was the first Triumph sports car built on a unitary construction platform.