Safeguard-class rescue and salvage ship

Last updated

330-CFD-DN-SD-06-04782 (21233919229).jpg
Class overview
NameSafeguard class
Builders Peterson Builders
OperatorsFlag of the United States Navy (official).svg  United States Navy
Preceded by Bolster class
Succeeded by Navajo class
Built1982–1984
In commission1985–present
Planned5
Completed4
Cancelled1
Active2
Retired2
General characteristics
Type Rescue and salvage ship
Displacement3,282 long tons (3,335 t) full
Length255 ft (78 m) o/a
Beam50 ft (15 m)
Draft15 ft 6 in (4.72 m)
Ice class1A
Propulsion
Speed14.5 knots (26.9 km/h; 16.7 mph)
Range17,500
Complement100 (6 officers, 94 enlisted)
Armament

The Safeguard class is a class of Towing, Salvage and Rescue Ship under the United States Navy. [1]

Contents

Development and design

Like all Safeguard-class rescue and salvage ships, Safeguard serves as an element of the United States Navy's Combat Logistics Support Force and provides rescue and salvage services to the fleet at sea. She also supported the protection of forces ashore through post-assault salvage operations in close proximity to the shore. She is designed to perform combat salvage, lifting, towing, off-ship firefighting, manned diving operations, and emergency repairs to stranded or disabled vessels. [2] [3] [4]

Salvage of disabled and stranded vessels

Disabled or stranded ships might require various types of assistance before retraction or towing can be attempted. In her 21,000 cubic feet (590 m3) salvage hold, Safeguard carries transportable cutting and welding equipment, hydraulic and electric power sources, and de-watering gear. Safeguard also has salvage and machine shops, and hull repair materials to effect temporary hull repairs on stranded or otherwise damaged ships. [2] [3]

Retraction of stranded vessels

Stranded vessels can be retracted from a beach or reef by the use of Safeguard's towing machine and propulsion. Additional retraction force can be applied to a stranded vessel through the use of up to six legs of beach gear, consisting of 6,000-pound (2,700 kg) STATO anchors, wire rope, chain, and salvage buoys. In a typical configuration, two legs of beach gear are rigged on board Safeguard, and up to four legs of beach are rigged to the stranded vessel. [5]

In addition to the standard legs of beach gear, Safeguard carries 4 spring buoys. The spring buoys are carried beneath the port and starboard bridge wings. Each spring buoy weighs approximately 3,100 pounds (1,400 kg), is 10 feet (3.0 m) long and 6 feet (1.8 m) in diameter, provides a net buoyancy of 7½ tons, and can withstand 125 tons of pull-through force. [5] The spring buoys are used with beach gear legs rigged from a stranded vessel when deep water is found seaward of the stranded vessel.

Towing

Safeguard's propulsion machinery provides a bollard pull (towing force at zero speed and full power) of 68 tons. [6] [7]

The centerpiece of Safeguard's towing capability is an Almon A. Johnson Series 322 double-drum automatic towing machine. Each drum carries 3,000 feet (910 m) of 2+1⁄4-inch-diameter (57 mm), drawn galvanized, 6×37 right-hand lay, wire-rope towing hawsers, with closed zinc-poured sockets on the bitter end. The towing machine uses a system to automatically pay-in and pay-out the towing hawser to maintain a constraint strain. [6] [7]

The automatic towing machine also includes a Series 400 traction winch that can be used with synthetic line towing hawsers up to 14 in (360 mm) in circumference. The traction winch has automatic payout but only manual recovery. [6] [7]

The Safeguard's caprail is curved to fairlead and prevent chafing of the towing hawser. It includes two vertical stern rollers to tend the towing hawser directly aft and two Norman pin rollers to prevent the towing hawser from sweeping forward of the beam at the point of tow. The stern rollers and Norman pins are raised hydraulically and can withstand a lateral force of 50,000 pounds (23,000 kg) at mid barrel. [6]

Two tow bows provide a safe working area on the fantail during towing operations. [6]

Manned diving operations

Safeguard has several diving systems to support different types of operations. Divers descend to diving depth on a diving stage that is lowered by one of two powered davits.

The diving locker is equipped with a double-lock hyperbaric chamber for decompression after deep dives or for the treatment of divers suffering from decompression sickness. [8]

The KM-37 diving system supports manned diving to depths of 190 feet (58 m) on surfaced-supplied air. A fly-away mixed gas system can be used to enable the support of diving to a maximum depth of 300 feet (91 m). [8]

The MK20 MOD0 diving system allows surface-supplied diving to a depth of 60 feet (18 m) with lighter equipment. [8]

Safeguard carries SCUBA equipment for dives that require greater mobility than is possible in tethered diving. [8]

Recovery of submerged objects

In addition to her two main ground tackle anchors [6,000-pound (2,700 kg) Navy standard stockless or 8,000-pound (3,600 kg) balanced-fluke anchors] Safeguard can use equipment associated with her beach gear to lay a multi-point open water moor to station herself for diving and ROV operations. [3]

A typical four-point moor consists of an X pattern with four Stato Anchors at the outside corners and Safeguard at the center, made fast to a spring buoy for the close end of each mooring leg with synthetic mooring lines. Using her capstans, Safeguard can shorten or lengthen the mooring line for each leg and change her position within the moor. [9]

Safeguard has a 7.5-ton-capacity boom on her forward kingpost and a 40-ton-capacity boom on her aft kingpost. [7] [8] [10]

Heavy lift

Safeguard has heavy lift system that consists of large bow and stern rollers, deck machinery, and tackle. The rollers serve as low-friction fairlead for the wire rope or chain used for the lift. The tackle and deck machinery provide up to 75 tons of hauling for each lift. The two bow rollers can be used together with linear hydraulic pullers to achieve a dynamic lift of 150 tons. The stern rollers can be used with the automatic towing machine to provide a dynamic lift of 150 tons. All four rollers can be used together for a dynamic lift of 300 tons [8] or a static tidal lift of 350 tons. [11]

Safeguard also has two auxiliary bow rollers, which can support of 75 ton lift when used together. [8]

Off-ship fire-fighting

Safeguard has three manually operated fire monitors, one on the forward signal bridge, one on the aft signal bridge, and one on the forecastle, that can deliver up to 1,000 gallons per minute of seawater or aqueous film forming foam (AFFF). [8] When originally built, Safeguard had a fourth remotely controlled fire monitor mounted on her forward kingpost, [2] but this was later removed. Safeguard has a 3,600-gallon foam tank. [7]

Emergency ship salvage material

In addition to the equipment carried by Safeguard, the US Navy Supervisor of Salvage maintains a stock of additional emergency fly-away salvage equipment that can be deployed aboard the salvage ships to support a wide variety of rescue and salvage operations. [12] [13]

Ships in class

Safeguard class
NameHull numberBuilderLaid downLaunchedCommissionedDecommissionedStatus
Safeguard T-ARS-50 Peterson Builders 8 November 198212 November 198217 August 19851 October 2016Deactivated
Grasp T-ARS-5120 March 198321 May 198414 December 1985Active
Salvor T-ARS-5216 September 198212 November 198314 June 1986Active
Grapple T-ARS-5328 April 19848 December 198415 November 19861 October 2016Deactivated
CanceledARS-54N/A

See also


Related Research Articles

USS <i>H-3</i> H-class submarine of the United States

USS H-3 (SS-30) was a H-class submarine originally named Garfish, the only ship of the United States Navy named for the gar, a popular target for recreational anglers.

USNS <i>Grapple</i> Rescue and salvage ship

USS Grapple (ARS-53) is a Safeguard-class rescue and salvage ship in the United States Navy. Her home port is Norfolk, Virginia. On 13 July 2006 Grapple was decommissioned from US Navy service and converted to civilian operation by Military Sealift Command. She was redesignated as USNS Grapple.

<span class="mw-page-title-main">Marine salvage</span> Recovering a ship or cargo after a maritime casualty

Marine salvage is the process of recovering a ship and its cargo after a shipwreck or other maritime casualty. Salvage may encompass towing, lifting a vessel, or effecting repairs to a ship. Salvors are normally paid for their efforts. However, protecting the coastal environment from oil spillages or other contaminants from a modern ship can also be a motivator, as oil, cargo, and other pollutants can easily leak from a wreck and in these instances, governments or authorities may organise the salvage.

USNS <i>Salvor</i> Safeguard-class rescue and salvage ship

USNS Salvor (T-ARS-52) is a Safeguard-class rescue and salvage ship, the second United States Navy ship of that name.

USS <i>Gypsy</i> (ARS(D)-1)

USS Gypsy was the lead ship of her class of salvage lifting vessels serving in the United States Navy. Originally designated LSM-549, she was launched by Brown Shipbuilding Corporation, Houston, Texas, on 7 December 1945, and commissioned on 18 March 1946 at Houston.

USS <i>Windlass</i>

USS Windlass, a Gypsy-class salvage lifting vessel of the United States Navy, was originally conceived as LSM-552 and laid down on 27 August 1945 at Houston, Texas, by Brown Shipbuilding Corporation. Launched on 7 December 1945; and commissioned on 9 April 1946 in Houston at the Tennessee Coal and Iron Docks.

USS <i>Salvager</i>

USS Salvager, a Gypsy-class salvage lifting vessel of the United States Navy, was originally conceived as LSM-551, was reclassified ARS(D)-3 on 24 April 1945; named Salvager on 1 May 1945; laid down on 27 August 1945 by the Brown Shipbuilding Corporation, Houston, Texas; launched on 7 December 1945; and commissioned on 22 March 1946.

USNS <i>Safeguard</i> Lead ship of her class

USNS Safeguard (T-ARS-50), formerly USS Safeguard (ARS-50), is the lead ship of her class and the second United States Navy ship of that name.

Rescue and salvage ships are a type of military salvage tug. They are tasked with coming to the aid of stricken vessels. Their general mission capabilities include combat salvage, lifting, towing, retraction of grounded vessels, off-ship firefighting, and manned diving operations. They were common during World War II.

USS <i>Current</i>

USS Current (ARS-22) was a Diver-class rescue and salvage ship commissioned by the U.S. Navy during World War II. Her task was to come to the aid of stricken vessels.

USNS <i>Mohawk</i> Tugboat of the United States Navy

USNS Mohawk (T-ATF-170) was a United States Navy Powhatan-class tugboat operated by the Military Sealift Command from 1980 to 2005.

<span class="mw-page-title-main">Salvage diving</span> Diving work associated with the recovery of vehicles, cargo and structures

Salvage diving is the diving work associated with the recovery of all or part of ships, their cargoes, aircraft, and other vehicles and structures which have sunk or fallen into water. In the case of ships it may also refer to repair work done to make an abandoned or distressed but still floating vessel more suitable for towing or propulsion under its own power. The recreational/technical activity known as wreck diving is generally not considered salvage work, though some recovery of artifacts may be done by recreational divers.

<span class="mw-page-title-main">Single buoy mooring</span> Offshore mooring buoy with connections for loading or unloading tankers

A Single buoy mooring (SrM) is a loading buoy anchored offshore, that serves as a mooring point and interconnect for tankers loading or offloading gas or liquid products. SPMs are the link between geostatic subsea manifold connections and weathervaning tankers. They are capable of handling any tonnage ship, even very large crude carriers (VLCC) where no alternative facility is available.

USNS <i>Grasp</i> Safeguard-class rescue and salvage ship

USNS Grasp (T-ARS-51) is a Safeguard-class rescue and salvage ship, the second United States Navy ship of that name.

USNS <i>Navajo</i> (T-ATF-169) Tugboat of the United States Navy

USNS Navajo (T-ATF-169) was a United States Navy Powhatan-class tugboat operated by the Military Sealift Command which was in service from 1980 to 2016. She spent the bulk of her career in the Pacific and is currently moored in Pearl Harbor, awaiting disposal.

USNS <i>Sioux</i> US Navy Tugboat

USNS Sioux (T-ATF-171) was a United States Navy Powhatan-class tugboat operated by the Military Sealift Command (MSC). She was in service from 1981 to 2021 and spent the bulk of this time supporting the Pacific Fleet.

<i>Powhatan</i>-class tugboat U.S. Navy tugboat class

The Powhatan class of fleet ocean tugs consists of seven ships built for the United States Navy, and operated by the Military Sealift Command (MSC). The lead ship of the class was launched in 1978 and the last ship in MSC service will be deactivated in 2023. During their service life, the Powhatan's were the most powerful tugs owned by the Navy.

Harbor Clearance Unit One, a United States Navy unit, was commissioned in February 1966 with the mission "....to provide salvage repair; diving and rescue services in rivers and restricted waters and to conduct harbor and river clearance operations in the Western Pacific." Some contended that the intended mission was to provide rapidly deployable diving and salvage teams in direct support of the Vietnam War. Whatever the actual intent was, the concept was proven so effective that the command was moved to continuous salvage service at Pearl Harbor, Hawaii, near the end of the Vietnam War.

<i>Bolster</i>-class rescue and salvage ship Class of rescue and salvage ships

The Bolster class were a series of rescue and salvage ships designed and built for the United States Navy during World War II. Rescue and salvage ships such as the Bolster class save battle-damaged combat ships from further damage and tow them to safety. Rescue, salvage and towing ships provide rapid fire fighting, pumping, battle damage repair and rescue towing to warships in combat and tow them to repair ships or bases in safe areas.

Beach gear is equipment and methods that place anchoring on land or in the water to exert pulling forces to salvage a stranded ship.

References

  1. ↑ "Salvage and Towing Assets". www.navsea.navy.mil. Retrieved 17 February 2021.
  2. 1 2 3 "USS Salvor Command History 1986" (PDF). Naval History and Heritage Command. 2 March 1987. Archived from the original (PDF) on 3 November 2012. Retrieved 13 February 2019.
  3. 1 2 3 "USS Grapple Command History 2002" (PDF). Naval History and Heritage Command. 25 September 2003. Archived from the original (PDF) on 3 November 2012. Retrieved 13 February 2019.
  4. ↑ "US Navy Fact File: Rescue and Salvage Ships T-ARS". United States Navy. 20 November 2018. Retrieved 13 February 2019.
  5. 1 2 "US Navy Salvage Manual Volume 1: Strandings and Harbor Clearance" (PDF). Naval Sea Systems Command. 31 May 2013. Retrieved 13 February 2019.
  6. 1 2 3 4 5 "US Navy Towing Manual". Military Sealift Command. 1 July 2002. Archived from the original on 21 July 2007. Retrieved 13 February 2019.
  7. 1 2 3 4 5 Southworth, George T. (June 2008). Systems Architecting Approach to Towing and Salvage Ship Recapitalization (MSc). University of Florida. Archived from the original on 11 June 2015. Retrieved 13 February 2019.
  8. 1 2 3 4 5 6 7 8 "USS Salvor Command History 2003" (PDF). Naval History and Heritage Command. 11 February 2004. Archived from the original (PDF) on 3 November 2012. Retrieved 13 February 2019.
  9. ↑ Shannon, Lee (4 April 2007). "A Four-Point Moor is Taxing and Challenging". Naval Safety Center. Archived from the original on 27 August 2009. Retrieved 13 February 2019.
  10. ↑ "T-ARS 50 Safeguard Class Salvage Vessel". Supervisor of Salvage and Diving. 20 January 2012. Archived from the original on 23 February 2012. Retrieved 13 February 2019.
  11. ↑ "US Navy Salvor's Handbook" (PDF). Supervisor of Salvage and Diving. 31 December 2003. Archived from the original (PDF) on 3 March 2016. Retrieved 13 February 2019.
  12. ↑ "Emergency Ship Salvage Material System". Supervisor of Salvage and Diving. Archived from the original on 4 March 2016. Retrieved 13 February 2019.
  13. ↑ "Emergency Ship Salvage Material (ESSM) Catalog: Salvage Equipment Volume 1 (S0300-BV-CAT-010)" (PDF). Everyspec.com. 1 April 1999. Retrieved 13 February 2019.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.