This article relies largely or entirely on a single source .(November 2015) |
USS Conserver (ARS-39) off Oahu, Hawaii, 26 April 1967 | |
Class overview | |
---|---|
Builders | Basalt Rock Company |
Operators | |
Preceded by | Diver class |
Succeeded by | Safeguard class |
Built | 1944–1946 |
In commission | 1944–present |
Planned | 12 |
Completed | 6 |
Cancelled | 6 |
Active | 1 |
Retired | 5 |
General characteristics | |
Type | Rescue and salvage ship |
Displacement | |
Length | 213 ft 6 in (65.07 m) |
Beam | 39 ft (12 m) |
Propulsion | diesel-electric, twin screws, 2,780 hp (2,070 kW) |
Speed | 15 knots (28 km/h; 17 mph) |
Complement | 100 |
Armament | 2 × 40 mm guns |
The Bolster class were a series of rescue and salvage ships designed and built for the United States Navy during World War II. Rescue and salvage ships such as the Bolster class save battle-damaged combat ships from further damage and tow them to safety. Rescue, salvage and towing ships provide rapid fire fighting, pumping, battle damage repair and rescue towing to warships in combat and tow them to repair ships or bases in safe areas.
The Basalt Rock Company's Steel Division built all six of the vessels in the Bolster class. The company (located south of Napa, California, on the Napa River) originally began in 1920 as a rock quarry operation, but by 1938 began constructing its own barges. [1]
On 24 October 1941, the U.S. Congress passed legislation establishing the Naval Salvage Service. Following the Attack on Pearl Harbor, this allowed the navy to begin salvage operations through a contract with Merritt-Chapman & Scott on 11 December 1941. It also allowed the U.S. Navy to have Merritt-Chapman & Scott train future naval salvage operators. A salvage crew's main job was to augment damage control beyond the capacity of a ship's crew. This could include fire fighting, towing ships to repair facilities, or clearing harbors of vessels damaged or scuttled in combat.
It was far faster to repair a damaged vessel than to construct a new one. During the island-hopping campaigns of the Pacific, salvage crews removed landing craft from beaches, clearing beach heads to become staging areas for continuing operations. Many damaged craft and their cargoes were retained and repaired, then used in future operations.
The U.S. Navy Bureau of Construction designed the Bolster-class salvage ships, along with naval officers and the salvage industry, ordering the new class during World War II. These were sturdy, oceangoing tugs equipped with diesel-electric propulsion units and strong, auto-tensioned towing winches. Modeled closely on the Diver salvage-ship design, the Bolster class had a 5 ft (1.5 m) wider beam for increased stability and equipment. [2]
Ship name | Hull number | Commissioned | Decommissioned | Fate |
---|---|---|---|---|
Bolster | ARS-38 | 1 May 1945 | 24 September 1994 | Sold for scrap, 12 April 2011 |
Conserver | ARS-39 | 9 June 1945 | 1 April 1994 | Sunk as a target, November 2004 |
Hoist | ARS-40 | 21 July 1945 | 30 September 1994 | Sold for scrap, 17 July 2007 |
Opportune | ARS-41 | 5 October 1945 | 30 April 1993 | Sold for scrap, 5 December 2003 |
Reclaimer | ARS-42 | 20 December 1945 | 16 September 1994 | Sold for scrap, 12 April 2011 |
Recovery | ARS-43 | 15 May 1946 | 20 September 1994 | Transferred to Taiwan, 30 September 1998; currently active |
Retriever | ARS-44 | never | never | Construction cancelled, 13 August 1945 |
Skillful | ARS-45 | never | never | Construction cancelled, 27 August 1945 |
Support | ARS-46 | never | never | Construction cancelled, 12 August 1945 |
Toiler | ARS-47 | never | never | Contract cancelled, 12 August 1945 |
Urgent | ARS-48 | never | never | Contract cancelled, 12 August 1945 |
Willing | ARS-49 | never | never | Contract cancelled, 12 August 1945 |
(Note: [3] )
Crew size was about 120 men including the complement of divers, made complete with some unique features found on board. Two fire monitors, capable of pumping out 4,000 US gallons (15,000 L; 3,300 imp gal) of water per minute onto a flaming deck, aided in rescue efforts. A full machine shop allowed patches to be cut and assembled, repairing damaged hulls long enough to return to port for any major repairs. The forward boom could lift up to 20 tons while the one aft, on the fantail, had a maximum lift of 8 tons. Also on the fantail was the Almon Johnson Towing machine which held 2,100 feet (640 m) of 2-inch (51 mm) wire rope capable of a maximum pull of 50 tons.
Further, in her salvage holds was an extensive inventory of portable salvage equipment- pumps, generators, and welding machines of various sizes that could be placed wherever needed. Plus, eight complete legs of beach gear, each capable of generating up to 60 tons of pulling power, were maintained on board. The ships could lift up to 150 tons off the bottom of the ocean with its main bow rollers and an additional 30 tons on its auxiliary bow rollers. A recompression chamber was available for treating diving related sicknesses and the MK-5 Surface Supplied Diving System was in use. [4]
The ship's crew also had the ability to make minor repairs to Bolster-class ships themselves while underway. A small DC electric shop complete with a welder was located on the main deck, while a larger machine-and-electrical shop that could replicate parts and conduct repairs was on the second deck. The crew could fabricate minor parts using onboard machines, including a drill press, grinder, and lathe. Crewmembers also had access to onboard equipment to patch salvage vessels, but shipyards generally performed the larger and more complex repairs that superseded the crew’s ability. [5]
Navigation of the ship took place on the bridge, and the electronics were updated throughout the vessels' service life. The bridge contained a compass, engine-order telegraph, gyro repeater, and helm. Behind the bridge on the starboard side was the chartroom while the radar room with a fathometer was on the port side. In the aft section of the bridge deck were communications rooms that received and sent communiqués. The gyro room was on the first platform beneath the navigation bridge [6]
During World War II, the U.S. Navy equipped the Bolster class with defensive armament and safety equipment. The Bolster class' 40-millimeter (1.57 in) gun was primarily used as a defensive weapon against aircraft and small ships. After the war, the navy switched the ship's armament to two 20-millimeter (0.79 in) guns and two 50-caliber machine guns. Eventually, the Bolster class only carried the 50-caliber guns. In case of sinking, there were two 35 ft (11 m) craft in cradles and seven rubber lifeboats available off the navigation bridge. [7]
USS Grapple (ARS-53) is a Safeguard-class rescue and salvage ship in the United States Navy. Her home port is Norfolk, Virginia. On 13 July 2006 Grapple was decommissioned from US Navy service and converted to civilian operation by Military Sealift Command. She was redesignated as USNS Grapple.
USNS Salvor (T-ARS-52) is a Safeguard-class rescue and salvage ship, the second United States Navy ship of that name.
USS Erie (PG-50) was the lead ship of the Erie-class gunboats of the United States Navy. Erie was the second US Navy ship to bear the name. The first, Erie, was named after Lake Erie, while this Erie followed the US Navy naming practices of gunboats, like cruisers, being named after US cities, with this Erie being named after Erie, Pennsylvania.
USNS Safeguard (T-ARS-50), formerly USS Safeguard (ARS-50), is the lead ship of her class and the second United States Navy ship of that name.
USS Clamp (ARS-33) was a Diver-class rescue and salvage ship acquired by the U.S. Navy during World War II. Her task was to come to the aid of stricken vessels.
USS Bolster (ARS-38) was a Bolster-class rescue and salvage ship acquired by the U.S. Navy during World War II and remained in service during the Korean War and the Vietnam War. Her task was to come to the aid of stricken vessels.
USS Opportune (ARS-41) was a Bolster-class rescue and salvage ship acquired by the United States Navy during World War II. Her task was to come to the aid of stricken vessels.
USNS Apache (T-ATF-172) was a U.S. Navy Powhatan-class fleet ocean tugboat that was operated by the Military Sealift Command (MSC) from 1981 to 2022. She spent the bulk of her career in the Atlantic and Mediterranean.
USNS Mohawk (T-ATF-170) was a United States Navy Powhatan-class tugboat operated by the Military Sealift Command from 1980 to 2005.
The United States Navy occupational rating of boatswain's mate is a designation given by the Bureau of Naval Personnel (BUPERS) to enlisted members who were rated or "striking" for the rating as a deck seaman. The colloquial form of address for a boatswain's mate is "Boats".
USNS Narragansett (T-ATF-167) is a Powhatan-class fleet ocean tugboat of the US Navy. She was launched in 1979 and inactivated in 1999, but has since been employed in a number of roles. She is still in service as of 2023 as a training support vessel for Carrier Strike Group 4.
USNS Grasp (T-ARS-51) is a Safeguard-class rescue and salvage ship, the second United States Navy ship of that name.
USNS Navajo (T-ATF-169) was a United States Navy Powhatan-class tugboat operated by the Military Sealift Command which was in service from 1980 to 2016. She spent the bulk of her career in the Pacific and is currently moored in Pearl Harbor, awaiting disposal.
USNS Powhatan (T-ATF-166) was the lead ship of the United States Navy Powhatan-class fleet ocean tugboats. She was in service with the U.S. Navy from 1979 to 1999, and then was leased to a private towing and salvage company. At the end of the lease in 2008, the ship was sold to the Turkish Navy which recommissioned her as TCG Inebolu.
USNS Sioux (T-ATF-171) was a United States Navy Powhatan-class tugboat operated by the Military Sealift Command (MSC). She was in service from 1981 to 2021 and spent the bulk of this time supporting the Pacific Fleet.
The Powhatan class of fleet ocean tugs consists of seven ships built for the United States Navy, and operated by the Military Sealift Command (MSC). The lead ship of the class was launched in 1978 and the last ship in MSC service will be deactivated in 2023. During their service life, the Powhatan's were the most powerful tugs owned by the Navy.
RPS Rajah Soliman (D-66) was a destroyer escort/frigate that served with the Philippine Navy between 1960 and 1964. A Buckley-class destroyer escort, it was originally named USS Bowers during its previous service with the United States Navy. It was the first destroyer escort to be operated by the Philippine Navy, and is the only member of its class ever operated by the service. Rajah Soliman was also the flagship of the Philippine Navy during its time in commission, which ended with the sinking of the vessel in 1964.
Ljubljana was the third and last Beograd-class destroyer built for the Royal Yugoslav Navy in the late 1930s, and designed to operate as part of a division led by the flotilla leader Dubrovnik. She entered KM service in November 1939, was armed with a main battery of four Škoda 120 mm (4.7 in) guns in superfiring single mounts – two forward and two aft of the superstructure – and she had a practical top speed of 35 knots.
The Safeguard class is a class of Towing, Salvage and Rescue Ship under the United States Navy.
ROKS Tongyeong (ATS-31) is the lead ship of the Tongyeong-class salvage and rescue ship in the Republic of Korea Navy. She is named after the city, Tongyeong.
This article incorporates text from the public domain Dictionary of American Naval Fighting Ships .The entry can be found here.
{{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link)