Saunders-Roe Duchess

Last updated

Duchess
Role Flying boat airliner
Manufacturer Saunders-Roe
StatusCancelled

The Saunders-Roe Duchess also known as the model P.131 was a British design for a large jet-powered flying boat envisaged by Saunders-Roe, based in Cowes on the Isle of Wight.

Contents

The Duchess had been intended to follow on from the propeller-driven Princess and drew heavily upon its design. Being larger than preceding commercial flying boats, as well as the novel use of jet engines for such a vehicle, Saunders-Roe promoted the Duchess as representing the next generation of flying boats to various civilian airlines. During the early 1950s, it was also promoted for military applications such as aerial reconnaissance and military transport duties, as had been the Princess. An even larger flying boat, the Saunders-Roe Queen, was also proposed around the same time. Unlike the Princess, however, no examples of the Duchess ever flew; attempts to garner interest in the concept never resulted in any orders being placed for the type, thus it never left the drawing board.

Development

Prior to the Second World War, British airline Imperial Airways had successfully used large long-range passenger flying boats, aircraft that could land and take off from the water, such as the Short Empire and Short S.26 to build up a network of long-distance routes. [1] These flying boats had not only pioneered new aerial routes across the British Empire which had previously not been served at all, passengers were transported within an unprecedented level of comfort, being provided with luxurious first class accommodation, including a promenade, sizable galley, separate bathrooms for men and women, and individual cabins for passengers. However, operations of these flying boats had been disrupted by wartime, during which Imperial Airways had also merged with British Airways Ltd to form British Overseas Airways Corporation (BOAC) in 1940. [2] Even prior to the war's end, the British Air Ministry was enthusiastic on the prospects for reviving the shuttered flying boat routes. [3]

During this same era, the British aircraft manufacturer Saunders-Roe had established itself as a prominent specialist in the field of flying boats in both civil and military contexts. The company foresaw a need of increasingly larger flying boats in the postwar era. Accordingly, the firm opted to design such an aircraft, which it named the Princess, a large turboprop-powered flying boat. [4] While several prototypes were constructed during the early 1950s, no buyers would emerge for the Princess as airlines opted to pursue the increasingly capable ground-based airliners instead, such as the newly developed de Havilland Comet, the world's first jet-propelled passenger aircraft. Despite the Princess's failure to attract orders, Saunders-Roe proposed several other flying boat designs, including the Duchess, which, unlike the Princess, harnessed the recent innovation of jet propulsion. [4]

The design of the Duchess drew heavily upon that of the prototyped Princess. [4] Despite this, this new design was considerably smaller than the Princess, and was to have been powered by a lower number of engines as well. [5] Additional supporting data for the Duchess's development was provided by the Marine Aircraft Experimental Establishment (MAEE), based at Felixstowe. [6]

Saunders-Roe vigorously promoted the Duchess both to prospective customers, both domestic and international. They displayed a model of the aircraft at the 1950 Farnborough Air Show. Though primarily marketed for civilian purposes, Saunders-Roe had also envisaged a military application for the Duchess. During the early 1950s, the company submitted a proposal under which the Duchess would have been adopted for aerial reconnaissance and military transportation purposes. [7] Tasman Empire Airways was reportedly considering placing an order for the Duchess to use on its routes between Australia and New Zealand; however, development of the aircraft was ultimately abandoned after Saunders-Roe failed to secure any orders. [4]

Design

The Saunders-Roe Duchess would have been a high-wing cantilever monoplane, featuring a relatively conventional tail and a full-length planing bottom hull. It was provided with a swept wing. [4] For stability, the wing would have carried floats near each wingtip; these would have incorporated a retraction mechanism to reduce drag. It would have been powered by an arrangement of six de Havilland Ghost turbojet engines mounted inside of the wingroots. The Duchess was projected to be capable of attaining speeds of up to 500 mph, unheard of amongst preceding flying boats. [5]

The Duchess was to be furnished with a pressurised and air-conditioned cabin; in the manufacturer's envisaged default configuration, this cabin would have accommodated a maximum of 74 passengers across two separated compartments, between which a central freight hold was positioned to minimise payload impact on the flying boat's centre of gravity. The fuselage was lined with large round windows to provide passengers with exterior views. [8]

Specifications

Data fromSaunders and Saro Aircraft since 1917 [9]

General characteristics

Performance

See also

Related development

Related lists

Related Research Articles

<span class="mw-page-title-main">Bristol Brabazon</span> British propeller-driven large airliner prototype

The Bristol Type 167 Brabazon was a large British piston-engined propeller-driven airliner designed by the Bristol Aeroplane Company to fly transatlantic routes between the UK and the United States. The type was named Brabazon after the Brabazon Committee and its chairman, Lord Brabazon of Tara, which had developed the specification to which the airliner was designed.

<span class="mw-page-title-main">Saunders-Roe Princess</span> British 1952 airliner flying boat

The Saunders-Roe SR.45 Princess was a British flying boat aircraft developed and built by Saunders-Roe at their Cowes facility on the Isle of Wight. It is the largest all-metal flying boat to have ever been constructed.

<span class="mw-page-title-main">Saunders-Roe SR.A/1</span> Prototype flying boat fighter aircraft

The Saunders-Roe SR.A/1 was a prototype flying boat fighter aircraft designed and built by British seaplane manufacturer Saunders-Roe. It was the first jet-propelled water-based aircraft in the world.

<span class="mw-page-title-main">Short Empire</span> British Flying Boat of the 1930s

The Short Empire was a medium-range four-engined monoplane flying boat, designed and developed by Short Brothers during the 1930s to meet the requirements of the growing commercial airline sector, with a particular emphasis upon its usefulness upon the core routes that served the United Kingdom. It was developed and manufactured in parallel with the Short Sunderland maritime patrol bomber, which went on to serve in the Second World War; a further derivative that was later developed was the piggy-back Short Mayo Composite.

Saunders-Roe Limited, also known as Saro, was a British aerospace and marine-engineering company based at Columbine Works, East Cowes, Isle of Wight.

<span class="mw-page-title-main">Saunders-Roe SR.53</span> Interceptor aircraft in the Royal Air Force

The Saunders-Roe SR.53 was a British prototype interceptor aircraft of mixed jet and rocket propulsion developed for the Royal Air Force (RAF) by Saunders-Roe in the early 1950s. As envisaged, the SR.53 would have been used as an interceptor aircraft, using its rocket propulsion to rapidly climb and approach incoming hostile bombers at high speeds; following its attack run, the aircraft would then return to its base using jet propulsion.

de Havilland Canada Dash 7 1975 airliner family by de Havilland Canada

The de Havilland Canada DHC-7, popularly known as the Dash 7, is a turboprop-powered regional airliner with short take-off and landing (STOL) performance. Variants were built with 50–54 seats. It first flew in 1975 and remained in production until 1988 when the parent company, de Havilland Canada, was purchased by Boeing in 1986 and later sold to Bombardier. In 2006 Bombardier sold the type certificate for the aircraft design to Victoria-based manufacturer Viking Air.

<span class="mw-page-title-main">Saro Cutty Sark</span> British amphibious aircraft

The Saro A17 Cutty Sark was a British amphibious aircraft from the period between World War I and World War II, built by the British firm Saunders-Roe. The aircraft was named after the ship Cutty Sark, rather than the garment or the fictional witch.

<span class="mw-page-title-main">Short S.26</span>

The Short S.26 G-class was a large transport flying boat designed and produced by the British aircraft manufacturer Short Brothers. It was designed to achieve a non-stop transatlantic capability, increasing the viability of long distant services/duties.

<span class="mw-page-title-main">Operational Requirement F.155</span> British military defense specification

Operational Requirement F.155 was a specification issued by the British Ministry of Supply on 15 January 1955 for an interceptor aircraft to defend the United Kingdom from Soviet high-flying nuclear-armed supersonic bombers.

The Short Shetland was intended as a British long-range, four-engined flying boat built by Short Brothers at Rochester, Kent for use in the Second World War. It was designed to meet an Air Ministry requirement for a very-long range reconnaissance flying boat. The design used the company's experience with large scale production of the Short Sunderland. Two prototypes flew, but the end of World War II prevented the Shetland from entering production. It was the first aircraft designed with a 110 volt electrical system.

<span class="mw-page-title-main">Short Scion Senior</span>

The Short S.22 Scion Senior was a 1930s British four-engined nine-passenger floatplane built by Short Brothers.

<span class="mw-page-title-main">Spartan Cruiser</span>

The Spartan Cruiser was a 1930s British three-engined transport monoplane for 6 to 10 passengers built by Spartan Aircraft Limited at East Cowes, Isle of Wight. It was a development of the Saro-Percival Mailplane for passenger use.

<span class="mw-page-title-main">Short Knuckleduster</span>

The Short R.24/31 was a British twin-engined, high-wing cantilever gull winged monoplane flying-boat designed and built by Short to Air Ministry specification R.24/31 for a "General Purpose Open Sea Patrol Flying Boat". The contract also specified the use of the experimental Rolls-Royce Goshawk engine. The Saunders-Roe London and the Supermarine Stranraer competed successfully for this contract.

de Havilland DH.34

The de Havilland DH.34 was a single engined British biplane airliner built by the de Havilland Aircraft Company in the 1920s. 12 were built, with the DH.34 serving with Imperial Airways and its predecessors for several years.

<span class="mw-page-title-main">Saro Windhover</span>

The Saro A.21 Windhover was a British amphibious aircraft from the period between World War I and World War II, constructed by Saunders-Roe, or Saro. It was originally advertised as the A.19 Thermopylae after the famous clipper ship, being an enlarged version of the Saro Cutty Sark.

<span class="mw-page-title-main">Saro Cloud</span> Type of aircraft

The Saro Cloud was a British passenger amphibian flying boat designed and built by Saunders-Roe as the A.19. It was later produced as the A.29 for the Royal Air Force for pilot and navigator training.

<span class="mw-page-title-main">Saunders Severn</span> Type of aircraft

The Saunders Severn was a three-engined biplane flying boat intended for maritime patrol duties. It performed well but was fragile and unreliable. Only one was built.

The Saunders-Roe P.192 Queen was a British jet-powered seaplane project designed by Saunders-Roe after the Second World War. It was intended for the carriage of passengers on intercontinental flights, especially between Great Britain and Australia. No prototype was built because of a lack of funding.

<span class="mw-page-title-main">Boeing-Canada A-213 Totem</span> 1930s Canadian patrol and utility flying boat

The Boeing-Canada A-213 Totem was a Canadian single-engine pusher monoplane flying boat intended for forestry and fisheries patrols as well as a light utility transport for the British Columbia coastline, where there are few flat places for runways, and waterways are plentiful. The sole example, CF-ARF, CB10 was designed and built by Boeing Aircraft of Canada. The name refers to the Totem poles used by the First Nations in British Columbia.

References

Citations

  1. ↑ Kaplan 2005, p. 196.
  2. ↑ Kaplan 2005, pp. 196–197.
  3. ↑ Kaplan 2005, p. 200.
  4. 1 2 3 4 5 Wilkinson, Stephan (September 2012). "Cancelled: Princess, Dethroned". Air & Space Magazine.
  5. 1 2 Kaplan 2005, p. 205.
  6. ↑ James Hamilton and J. E. Allen (4 July 2016). "Seaplane research — the MAEE contribution". The Aeronautical Journal. 107 (1069). Cambridge University Press: 125–148. doi:10.1017/S0001924000011878. S2CID   112615026.
  7. ↑ "AVIA 54/719: Proposal by Saunders-Roe for use of Duchess flying boat for general reconnaissance and military transport: technical policy". The National Archives, Kew. c. 1951.
  8. ↑ "WA-24733-G: Copy negative of a Saunders-Roe Duchess flying boat". Whites Aviation Ltd. c. 1950.
  9. ↑ London 1988, p. 316.

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.