HP-15 | |
---|---|
Role | Standard-class sailplane |
National origin | United States |
Manufacturer | Homebuilt |
Designer | Richard Schreder |
First flight | ca. 1969 |
Number built | 1 [1] |
The Schreder HP-15 sailplane prototype was designed by Richard Schreder as a personal mount in which to challenge the 1969 U.S. National Soaring Championships. [1] [2]
With an extreme 33:1 aspect ratio and a relatively low empty weight, the HP-15 was expected to generate less induced drag and therefore higher performance. The type achieved excellent glide ratios in fast flight, but had disappointing climbing ability, due to extensive flow separation on the upper wing surfaces during slow flight and Schreder and the HP-15 finished in 65th place. After the Championships Schreder re-winged the fuselage to produce his next design, the HP-16. [1] [2]
In the April 2011 the sole HP-15 prototype, registered N5488, still existed and was privately registered in Peoria, Illinois. [3]
General characteristics
Performance
The Advanced Soaring Concepts Spirit, also called the Advanced Soaring Concepts American Spirit, is an American mid-wing, T-tailed. single-seat, FAI Standard Class glider that was designed by Tor Jensen and produced by Advanced Soaring Concepts, first flying in 1992. The aircraft was produced in kit form for amateur construction.
The Preiss RHJ-7 is a side-by-side two-seat flapped glider developed by Preiss from a Schreder HP-14. The design used standard HP-14 wings with a 2 ft center section added to the fuselage, V-tail, fixed undercarriage and a single control stick between the seats. The RHJ-7 first flew in 1966 and was the starting point for the RHJ-8 and RHJ-9 variants, also homebuilts.
The RS-15 is a Richard Schreder-designed metal Racing Class sailplane that was offered as a kit for homebuilding during the 1970s and 1980s.
The HP-18 is a Richard Schreder-designed metal Racing Class sailplane that was offered as a kit for homebuilding during the 1970s and 1980s.
The HP-14 is a Richard Schreder-designed all-metal glider aircraft that was offered as a kit for homebuilding during the 1960s and 1970s. It was originally developed by retrofitting improved wings to the fuselage and tail of the HP-13, and first flew in 1966. Schreder won the 1966 US national soaring championship in the prototype HP-14.
The Schreder Airmate HP-8 is an American, high-wing single seat glider that was designed by Richard Schreder after the loss of the HP-7 in 1957.
The Schreder Airmate HP-9 is an American high wing, single seat glider that was designed by Richard Schreder and intended to be flown by the designer in the 1960 World Gliding Championships.
The Schreder Airmate HP-10 is an American, high wing, single seat, FAI Standard Class glider that was designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Bikle T-6 is an American, mid-wing, single seat, glider designed by Paul Bikle and based upon the design of the Schreder HP-14. Even though only one T-6 was built it is noted as the most tested and studied glider with complete data published. It has been used extensively as a comparative reference glider for evaluating other designs during in-flight comparisons.
The Schreder Airmate HP-11 is an American mid-wing, V-tailed, single seat glider designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Schreder HP-12A is an American homebuilt, mid-wing, V tailed, single-seat glider that was assembled out of various components all designed by Richard Schreder.
The Schreder HP-16 is an American mid-wing, single seat, V tailed, FAI Standard Class glider that was designed by Richard Schreder.
The Schreder HP-17 was an American mid-wing, V tailed, single seat, experimental glider designed by Richard Schreder to test a new airfoil section.
The Schreder HP-19 is an American, high-wing, T-tail, single seat glider designed by Richard Schreder.
The Schreder HP-20 is an American, high-wing, T-tail, single seat glider designed by Richard Schreder.
The Bartos/Nobel BN-1 Phantom is an American, two-seat, mid-wing glider designed by Gene Bartos in the late 1960s.
The Bock 1 is an American high-wing, strut-braced single-seat glider that was designed by John W. Bock of Long Beach, California.
The Bowlus BZ-1 is an American single seat FAI 15 Meter Class, V-tailed glider that was designed and built by Michael Bowlus.
The Kohler Alpha is an American, mid-wing, V-tailed, FAI Open Class single seat glider that was designed and built by Spud Kohler of Cleveland, Ohio.
The Whigham GW-2 is an American high-wing, single-seat, V-tailed, FAI Open Class glider that was designed and constructed by Gene Whigham, a retired flight test engineer for Convair.