HP-19 | |
---|---|
Role | Glider |
National origin | United States |
Designer | Richard Schreder |
First flight | 1981 |
Introduction | 1981 |
Number built | one |
The Schreder HP-19 is an American, high-wing, T-tail, single seat glider designed by Richard Schreder. [1] [2]
The HP-19 was another Schreder design for the FAI 15 Metre Class. The HP-19 drawings were just complete when the designer lost interest in development and turned his attention to the HP-21 instead. The sole example of the HP-19 was built by Henry Preiss in Schreder's workshop in Bryan, Ohio and first flew in 1981. [1] [2] [3]
The HP-19 is built from metal and fiberglass and features carbon fiber spar caps, along with foam ribs. The wing is straight, tapered and has winglets, along with the trademark Schreder 90° flaps. The airfoil is a Schreder modification of a Wortmann section. 200 lb (91 kg) of water ballast can be carried. The landing gear is a retractable monowheel. [1] [2]
Data from Sailplane Directory and Soaring [1] [2]
General characteristics
Performance
The Standard Cirrus is a Standard-class glider built in Germany by Schempp-Hirth. The Standard Cirrus was produced between 1969 and 1985, when it was replaced by the Discus. Over 800 examples were built, making it one of the most successful early fibreglass glider designs.
The Schempp-Hirth Nimbus-2 is an Open Class glider built by Schempp-Hirth during the 1970s. The Nimbus-2 first flew in April 1971 and a total of over 240 examples of all subtypes have been built until the beginning of the 1980s. It replaced the Schempp-Hirth Cirrus.
The Schleicher ASW 15 is a single-seat sailplane designed in 1968 by Gerhard Waibel and manufactured by Alexander Schleicher GmbH & Co. The ASW 15 has shoulder-mounted wings and an all-flying tailplane, with its single tow-release placement a compromise between winching and aerotowing. The later ASW 15B had several improvements, including a tow-release placed on the plane of symmetry, an 11 cm taller rudder, a slightly larger main wheel, and the provision of a 90-litre water ballast system.
The RS-15 is a Richard Schreder-designed metal Racing Class sailplane that was offered as a kit for homebuilding during the 1970s and 1980s.
The HP-18 is a Richard Schreder-designed metal Racing Class sailplane that was offered as a kit for homebuilding during the 1970s and 1980s.
The HP-14 is a Richard Schreder-designed all-metal glider aircraft that was offered as a kit for homebuilding during the 1960s and 1970s. It was originally developed by retrofitting improved wings to the fuselage and tail of the HP-13, and first flew in 1966. Schreder won the 1966 US national soaring championship in the prototype HP-14.
The Laister LP-15 Nugget is an American single-seat, high-wing glider designed by Jack and Bill Laister for the FAI Standard Class. It first flew in 1971.
The Schreder Airmate HP-8 is an American, high-wing single seat glider that was designed by Richard Schreder after the loss of the HP-7 in 1957.
The Schreder Airmate HP-9 is an American high wing, single seat glider that was designed by Richard Schreder and intended to be flown by the designer in the 1960 World Gliding Championships.
The Schreder Airmate HP-10 is an American, high wing, single seat, FAI Standard Class glider that was designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Bikle T-6 is an American, mid-wing, single seat, glider designed by Paul Bikle and based upon the design of the Schreder HP-14. Even though only one T-6 was built it is noted as the most tested and studied glider with complete data published. It has been used extensively as a comparative reference glider for evaluating other designs during in-flight comparisons.
The Schreder Airmate HP-11 is an American mid-wing, V-tailed, single seat glider designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Schreder HP-12A is an American homebuilt, mid-wing, V tailed, single-seat glider that was assembled out of various components all designed by Richard Schreder.
The Schreder HP-16 is an American mid-wing, single seat, V tailed, FAI Standard Class glider that was designed by Richard Schreder.
The Schreder HP-17 was an American mid-wing, V tailed, single seat, experimental glider designed by Richard Schreder to test a new airfoil section.
The Schreder HP-20 is an American, high-wing, T-tail, single seat glider designed by Richard Schreder.
The Bowlus BZ-1 is an American single seat FAI 15 Meter Class, V-tailed glider that was designed and built by Michael Bowlus.
The Zauner OZ-5 One-Yankee is an American high-wing, T-tailed, single seat, 15 metre class glider that was designed and constructed by Otto Zauner.
The Leffler-MacFarlane LM-1 is an American mid-wing, single-seat, FAI Open Class glider that was designed and constructed by Al Leffler, Walt MacFarlane and Bill Meyer, first flying in November 1963.
The Masak Scimitar was an American mid-wing, single-seat glider that was designed and constructed by Peter Masak. It first flew in 1995.