HP-16 | |
---|---|
Role | Glider |
National origin | United States |
Designer | Richard Schreder |
Introduction | circa 1971 |
Status | No longer in production |
Number built | about 20 |
Developed from | HP-15 |
The Schreder HP-16 is an American mid-wing, single seat, V tailed, FAI Standard Class glider that was designed by Richard Schreder. [1] [2]
After the failure of the HP-15 to perform well in the 1969 US Nationals Schreder started the HP-16 with a new design philosophy. Avoiding the extremely high aspect ratio that the 15 had, he opted for a more modest 21.5:1 aspect ratio and larger wing area to improve performance in weak conditions. The HP-16's wing has 50% more wing area than the HP-15 and uses a Wortmann 67-150 airfoil. [1] [2]
Like other Schreder designs the HP-16 is of all-metal construction, but with the wing skins bonded to foam ribs rather than using rivets to provide a smoother surface. The bonded construction also cut building time. The wing features the signature Schreder 90° flaps that allow steep descents and the use of small fields for landing. [1] [2]
The HP-16s were all amateur-built aircraft and about 20 were completed and flown. [1] [2]
In April 2011 there were still eleven HP-16s registered with the US Federal Aviation Administration and two registered with Transport Canada. [3] [4]
Data from Sailplane Directory and Soaring [1] [2]
General characteristics
Performance
The Schweizer SGS 1-34 is a United States Standard Class, single-seat, high-wing glider built by Schweizer Aircraft of Elmira, New York.
The HP-18 is a Richard Schreder-designed metal Racing Class sailplane that was offered as a kit for homebuilding during the 1970s and 1980s.
The HP-14 is a Richard Schreder-designed all-metal glider aircraft that was offered as a kit for homebuilding during the 1960s and 1970s. It was originally developed by retrofitting improved wings to the fuselage and tail of the HP-13. Schreder won the 1966 US national soaring championship in the prototype HP-14.
The Glasflügel 604 is a high-wing, T-tailed, single seat, FAI Open Class glider that was designed and produced in West Germany by Glasflügel starting in 1970.
The Laister LP-15 Nugget is an American single-seat, high-wing glider designed by Jack and Bill Laister for the FAI Standard Class.
The Schreder Airmate HP-8 is an American, high-wing single seat glider that was designed by Richard Schreder after the loss of the HP-7 in 1957.
The Schreder Airmate HP-9 is an American high wing, single seat glider that was designed by Richard Schreder and intended to be flown by the designer in the 1960 World Gliding Championships.
The Schreder Airmate HP-10 is an American, high wing, single seat, FAI Standard Class glider that was designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Bikle T-6 is an American, mid-wing, single seat, glider designed by Paul Bikle and based upon the design of the Schreder HP-14. Even though only one T-6 was built it is noted as the most tested and studied glider with complete data published. It has been used extensively as a comparative reference glider for evaluating other designs during in-flight comparisons.
The Schreder Airmate HP-11 is an American mid-wing, V-tailed, single seat glider designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Schreder HP-12A is an American homebuilt, mid-wing, V tailed, single-seat glider that was assembled out of various components all designed by Richard Schreder.
The Schreder HP-17 was an American mid-wing, V tailed, single seat, experimental glider designed by Richard Schreder to test a new airfoil section.
The Schreder HP-19 is an American, high-wing, T-tail, single seat glider designed by Richard Schreder.
The Schreder HP-20 is an American, high-wing, T-tail, single seat glider designed by Richard Schreder.
The Bowlus BZ-1 is an American single seat FAI 15 Meter Class, V-tailed glider that was designed and built by Michael Bowlus.
The Kohler Alpha is an American, mid-wing, V-tailed, FAI Open Class single seat glider that was designed and built by Spud Kohler of Cleveland, Ohio.
The Oldershaw O-3 is an American high-wing, single seat, V-tailed glider that was designed by Vernon Oldershaw. Two examples were constructed as gliders and then both were later converted to motor gliders.
The FFA Diamant is a family of Swiss high-wing, T-tailed, single-seat, FAI Standard Class and FAI Open Class gliders that was designed by engineering students under supervision of Professor Rauscher at the ETH Zurich and manufactured by Flug- und Fahrzeugwerke Altenrhein AG (FFA) of Altenrhein, Switzerland.
The Zauner OZ-5 One-Yankee is an American high-wing, T-tailed, single seat, 15 metre class glider that was designed and constructed by Otto Zauner.
The Leffler-MacFarlane LM-1 is an American mid-wing, single-seat, FAI Open Class glider that was designed and constructed by Al Leffler, Walt MacFarlane and Bill Meyer, first flying in November 1963.