The solar azimuth angle is the azimuth (horizontal angle with respect to north) of the Sun's position. [1] [2] [3] This horizontal coordinate defines the Sun's relative direction along the local horizon, whereas the solar zenith angle (or its complementary angle solar elevation) defines the Sun's apparent altitude.
There are several conventions for the solar azimuth; however, it is traditionally defined as the angle between a line due south and the shadow cast by a vertical rod on Earth. This convention states the angle is positive if the shadow is east of south and negative if it is west of south. [1] [2] For example, due east would be 90° and due west would be -90°. Another convention is the reverse; it also has the origin at due south, but measures angles clockwise, so that due east is now negative and west now positive. [3]
However, despite tradition, the most commonly accepted convention for analyzing solar irradiation, e.g. for solar energy applications, is clockwise from due north, so east is 90°, south is 180°, and west is 270°. This is the definition used by NREL in their solar position calculators [4] and is also the convention used in the formulas presented here. However, Landsat photos and other USGS products, while also defining azimuthal angles relative to due north, take counterclockwise angles as negative. [5]
The following formulas assume the north-clockwise convention. The solar azimuth angle can be calculated to a good approximation with the following formula, however angles should be interpreted with care because the inverse sine, i.e. x = sin−1 y or x = arcsin y, has multiple solutions, only one of which will be correct.
The following formulas can also be used to approximate the solar azimuth angle, but these formulas use cosine, so the azimuth angle as shown by a calculator will always be positive, and should be interpreted as the angle between zero and 180 degrees when the hour angle, h, is negative (morning) and the angle between 180 and 360 degrees when the hour angle, h, is positive (afternoon). (These two formulas are equivalent if one assumes the "solar elevation angle" approximation formula). [2] [3] [4]
So practically speaking, the compass azimuth which is the practical value used everywhere (in example in airlines as the so called course) on a compass (where North is 0 degrees, East is 90 degrees, South is 180 degrees and West is 270 degrees) can be calculated as
The formulas use the following terminology:
In addition, dividing the above sine formula by the first cosine formula gives one the tangent formula as is used in The Nautical Almanac. [6]
A 2021 publication presents a method that uses a solar azimuth formula based on the subsolar point and the atan2 function, as defined in Fortran 90, that gives an unambiguous solution without the need for circumstantial treatment. [7] The subsolar point is the point on the surface of the Earth where the Sun is overhead.
The method first calculates the declination of the Sun and equation of time using equations from The Astronomical Almanac, [8] then it gives the x-, y- and z-components of the unit vector pointing toward the Sun, through vector analysis rather than spherical trigonometry, as follows:
where
It can be shown that . With the above mathematical setup, the solar zenith angle and solar azimuth angle are simply
where
If one prefers North-Clockwise Convention, or East-Counterclockwise Convention, the formulas are
Finally, the values of , and at 1-hour step for an entire year can be presented in a 3D plot of "wreath of analemmas" as a graphic depiction of all possible positions of the Sun in terms of solar zenith angle and solar azimuth angle for any given location. Refer to sun path for similar plots for other locations.
In mathematics, a spherical coordinate system is a coordinate system for three-dimensional space where the position of a point is specified by three numbers: the radial distance of that point from a fixed origin, its polar angle measured from a fixed zenith direction, and the azimuthal angle of its orthogonal projection on a reference plane that passes through the origin and is orthogonal to the zenith, measured from a fixed reference direction on that plane. It can be seen as the three-dimensional version of the polar coordinate system.
An azimuth is an angular measurement in a spherical coordinate system. More specifically, it is the horizontal angle from a cardinal direction, most commonly north.
Astronomical coordinate systems are organized arrangements for specifying positions of satellites, planets, stars, galaxies, and other celestial objects relative to physical reference points available to a situated observer. Coordinate systems in astronomy can specify an object's position in three-dimensional space or plot merely its direction on a celestial sphere, if the object's distance is unknown or trivial.
The great-circle distance, orthodromic distance, or spherical distance is the distance along a great circle.
In geodesy, conversion among different geographic coordinate systems is made necessary by the different geographic coordinate systems in use across the world and over time. Coordinate conversion is composed of a number of different types of conversion: format change of geographic coordinates, conversion of coordinate systems, or transformation to different geodetic datums. Geographic coordinate conversion has applications in cartography, surveying, navigation and geographic information systems.
In probability theory, the Borel–Kolmogorov paradox is a paradox relating to conditional probability with respect to an event of probability zero. It is named after Émile Borel and Andrey Kolmogorov.
Orthographic projection in cartography has been used since antiquity. Like the stereographic projection and gnomonic projection, orthographic projection is a perspective projection in which the sphere is projected onto a tangent plane or secant plane. The point of perspective for the orthographic projection is at infinite distance. It depicts a hemisphere of the globe as it appears from outer space, where the horizon is a great circle. The shapes and areas are distorted, particularly near the edges.
The solar zenith angle is the zenith angle of the sun, i.e., the angle between the sun’s rays and the vertical direction. It is the complement to the solar altitude or solar elevation, which is the altitude angle or elevation angle between the sun’s rays and a horizontal plane. At solar noon, the zenith angle is at a minimum and is equal to latitude minus solar declination angle. This is the basis by which ancient mariners navigated the oceans.
The subsolar point on a planet is the point at which its sun is perceived to be directly overhead ; that is, where the sun's rays strike the planet exactly perpendicular to its surface. It can also mean the point closest to the sun on an astronomical object, even though the sun might not be visible.
In cartography, a Tissot's indicatrix is a mathematical contrivance presented by French mathematician Nicolas Auguste Tissot in 1859 and 1871 in order to characterize local distortions due to map projection. It is the geometry that results from projecting a circle of infinitesimal radius from a curved geometric model, such as a globe, onto a map. Tissot proved that the resulting diagram is an ellipse whose axes indicate the two principal directions along which scale is maximal and minimal at that point on the map.
The function is defined as the angle in the Euclidean plane, given in radians, between the positive axis and the ray from the origin to the point .
Great-circle navigation or orthodromic navigation is the practice of navigating a vessel along a great circle. Such routes yield the shortest distance between two points on the globe.
The sunrise equation can be used to derive the time of sunrise and sunset for any solar declination and latitude in terms of local solar time when sunrise and sunset actually occur.
Local tangent plane coordinates (LTP), also known as local ellipsoidal system, local geodetic coordinate system, or local vertical, local horizontal coordinates (LVLH), are a spatial reference system based on the tangent plane defined by the local vertical direction and the Earth's axis of rotation. It consists of three coordinates: one represents the position along the northern axis, one along the local eastern axis, and one represents the vertical position. Two right-handed variants exist: east, north, up (ENU) coordinates and north, east, down (NED) coordinates. They serve for representing state vectors that are commonly used in aviation and marine cybernetics.
Geographical distance or geodetic distance is the distance measured along the surface of the earth. The formulae in this article calculate distances between points which are defined by geographical coordinates in terms of latitude and longitude. This distance is an element in solving the second (inverse) geodetic problem.
In spherical astronomy, the parallactic angle is the angle between the great circle through a celestial object and the zenith, and the hour circle of the object. It is usually denoted q. In the triangle zenith—object—celestial pole, the parallactic angle will be the position angle of the zenith at the celestial object. Despite its name, this angle is unrelated with parallax. The parallactic angle is zero or 180° when the object crosses the meridian.
Geodetic coordinates are a type of curvilinear orthogonal coordinate system used in geodesy based on a reference ellipsoid. They include geodetic latitude (north/south) ϕ, longitude (east/west) λ, and ellipsoidal heighth. The triad is also known as Earth ellipsoidal coordinates.
The position of the Sun in the sky is a function of both the time and the geographic location of observation on Earth's surface. As Earth orbits the Sun over the course of a year, the Sun appears to move with respect to the fixed stars on the celestial sphere, along a circular path called the ecliptic.
In physics, and especially scattering theory, the momentum-transfer cross section is an effective scattering cross section useful for describing the average momentum transferred from a particle when it collides with a target. Essentially, it contains all the information about a scattering process necessary for calculating average momentum transfers but ignores other details about the scattering angle.
Earth section paths are plane curves defined by the intersection of an earth ellipsoid and a plane. Common examples include the great ellipse and normal sections. Earth section paths are useful as approximate solutions for geodetic problems, the direct and inverse calculation of geographic distances. The rigorous solution of geodetic problems involves skew curves known as geodesics.