A 2-8-8-4 steam locomotive, under the Whyte notation, has two leading wheels, two sets of eight driving wheels, and a four-wheel trailing truck. The type was generally named the Yellowstone, a name given it by the first owner, the Northern Pacific Railway, whose lines ran near Yellowstone National Park. Seventy-two Yellowstone-type locomotives were built for four U.S. railroads.
Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees have shortened the name since its introduction. It is most-commonly known as a Northern.
A 2-8-8-2, in the Whyte notation for describing steam locomotive wheel arrangements, is an articulated locomotive with a two-wheel leading truck, two sets of eight driving wheels, and a two-wheel trailing truck. The equivalent UIC classification is, refined to Mallet locomotives, (1'D)D1'. These locomotives usually employ the Mallet principles of articulation—with the rear engine rigidly attached to the boiler and the front engine free to rotate—and compounding. The 2-8-8-2 was a design largely limited to American locomotive builders. The last 2-8-8-2 was retired in 1962 from the N&W's roster, two years past the ending of steam though steam was still used on steel mill lines and other railroads until 1983.
Under the Whyte notation for the classification of steam locomotives by wheel arrangement, 4-10-2 represents the arrangement of four leading wheels, ten powered and coupled driving wheels and two trailing wheels. In South Africa, where the wheel arrangement was first used, the type was known as a Reid Tenwheeler. In the United States of America it was known as a Southern Pacific on the Southern Pacific Railroad and as an Overland on the Union Pacific Railroad.
Southern Pacific Railroad's AC-4 class of steam locomotives was the first class of 4-8-8-2 cab forward locomotives. They were intended to improve on the railroad's MC (Mallet-Consolidation) class 2-8-8-2 locomotives with a larger firebox, hence, the four-wheel leading truck.
Southern Pacific Railroad's AC-6 class of steam locomotives was the third of the railroad's classes built with a 4-8-8-2 wheel arrangement. Like the earlier AC-4 and AC-5 classes, the AC-6 class were cab forward locomotives. The AC-6 was slightly larger than the previous classes with a higher boiler pressure and tractive effort rating.
Southern Pacific Railroad's AC-7 class of cab forward steam locomotives was the fourth class of the 4-8-8-2 locomotives purchased by Southern Pacific (SP). The locomotives were built by Baldwin Locomotive Works and shared many of the same characteristics of previous AC class locomotives.
Southern Pacific Railroad's AC-11 class of cab forward steam locomotives was the seventh class of 4-8-8-2 locomotives ordered by Southern Pacific (SP) from Baldwin Locomotive Works; SP was so pleased with the AC-10 class built a year earlier that the railroad began placing orders for AC-11s while the AC-10s were still being built and delivered. They were built between November 1942 and April 1943, closely resembling the AC-10s.
Southern Pacific Railroad's AC-12 class of cab forward steam locomotives was the last class of steam locomotives ordered by Southern Pacific. They were built by Baldwin Locomotive Works during World War II, with the first, number 4275, entering service on October 27, 1943, and the last, 4294, on March 19, 1944. The locomotives were effectively a conventional 2-8-8-4 locomotive running in reverse; the tender being coupled at the smokebox end of the locomotive. This was made possible by the use of oil-firing. The distinct features of these locomotives include: a streamlined front with white band, an air horn on the front, a streamlined pilot, a SP 12 wheel box tender, and air compressors mounted on the smokebox. Southern Pacific used these locomotives all over its system, but they were extremely famous for working on Donner Pass & Cascade Summit.
Southern Pacific 4294 is a class "AC-12" 4-8-8-2 Cab forward type steam locomotive that was owned and operated by the Southern Pacific Railroad (SP). It was built by the Baldwin Locomotive Works in March 1944 and was used hauling SP's trains over the Sierra Nevada, often working on Donner Pass in California. Today it is preserved at the California State Railroad Museum (CSRM) in Sacramento, California.
Southern Pacific Company's MM-2 class of steam locomotives was Southern Pacific's (SP) only class of 2-6-6-2 locomotives ordered and built as oil-fired cab forward locomotives. They were built in 1911 as compound-expansion Mallet locomotives by Baldwin Locomotive Works and entered service on SP beginning September 19, 1911. By 1914, they had all been upgraded with an additional leading axle making them 4-6-6-2 locomotives, reclassified from MM-2 to AM-2. This was done to improve handling at speed. These locomotives were the predecessors of several other cab-forward engines, culminating in the AC-12 class cab forward locomotives built during World War II.
Southern Pacific Railroad's MC-1 class of steam locomotive consisted of two locomotives built by Baldwin Locomotive Works in April 1909. They are the first two locomotives converted by Southern Pacific (SP) to run as cab forward locomotives.
Southern Pacific Railroad's MC-2 class of steam locomotives was the first class to be ordered by and built for Southern Pacific (SP) as cab forward locomotives. They were built in 1909 following the design of SP's MC-1 class built earlier that year. The success of this locomotive model led to the design and introduction of the AC class of 4-8-8-2 cab forward locomotives in the 1930s and 1940s.
Southern Pacific Railroad's AC-1 class of cab forward steam locomotives consisted of locomotives rebuilt from MC-1 and MC-2 class locomotives that were originally built by Baldwin Locomotive Works in 1909. The MC-2 class was the first class of locomotives built and delivered to SP as cab forward locomotives in late 1909. The AC-1 class was the first of the successful AC series of cab forward locomotives that numbered nearly 200 in total on the SP. Southern Pacific No. 4002 was rebuilt in June 1923 as a Cab Forward.
Southern Pacific Railroad's MC-4 class of steam locomotive was the second class ordered and built as cab forward locomotives. Southern Pacific (SP) found the MC-2 class sufficient for a proof-of-concept for cab forward locomotives and sought to continue with now tested designs.
Southern Pacific Company's MC-6 class of steam locomotives is made up of two batches: the first consisting of 15 locomotives weighing 435,800 pounds built in 1912, the second consisting of 5 locomotives weighing 437,100 lb built in 1913. All of the locomotives were built by Baldwin Locomotive Works. This was the last class of 2-8-8-2 locomotives that Southern Pacific (SP) ordered as cab forward locomotives.
Southern Pacific Railroad's (SP) number 6051 is an EMD E9 diesel locomotive. It was one of nine E9s built for SP by EMD in December 1954 as Construction Number 20100 on SP Order Number P-1041 and EMD Order Number 2068. It entered service on January 4, 1955 at Los Angeles. These nine locomotives allowed the dieselization of the Coast Daylight and Lark passenger trains. The units operated with E7s, ALCO PAs, and other passenger equipped diesels as required. Assigned to the Los Angeles passenger pool for its entire career, it worked north via the Coast Line to San Francisco or east on the Sunset Route to El Paso or New Orleans. When SP and Rock Island began pooling locomotives on the Chicago-Los Angeles Golden State in 1967, it also worked those trains until they were discontinued the following year, often in mixed SP/Rock Island consists. SP 6051 is the only surviving Southern Pacific passenger-dedicated diesel locomotive, and it currently resides at the California State Railroad Museum in Sacramento, California. It is also used for train excursions.
Southern Pacific 2472 is a P-8 Class 4-6-2 heavy "Pacific" type steam locomotive built by the Baldwin Locomotive Works for Southern Pacific Railroad (SP) in 1921. SP No. 2472 is one of three surviving Southern Pacific P-8 class 4-6-2 Pacific locomotives, the other two bring Nos. 2467 and 2479. The 4-6-2 designation means it has four leading wheels, six driving wheels, and two trailing wheels.
Southern Pacific 745 is a preserved Mikado-type steam locomotive that was fabricated at the Southern Pacific Railroad's Algiers Shops at Algiers Point directly across the Mississippi River from New Orleans. With a 2-8-2 wheel configuration, 745 was built as a freight engine for the Southern Pacific Railroad Company. The locomotive returned to service in 2004 after a restoration period and is now housed on a short spur line in suburban Jefferson Parish. It is currently the only operating steam locomotive in Louisiana.
Southern Pacific Company's AM-2 class of steam locomotives was Southern Pacific's (SP) only class of 4-6-6-2 locomotives ordered and built as cab forward locomotives. They were actually MM-2s that had been upgraded. MM-2s were built in 1911 by Baldwin Locomotive Works and entered service on SP beginning September 19, 1911. By 1914, they had all been upgraded with an additional leading axle making them 4-6-6-2 locomotives. They reclassified their MM-2 as AM-2. This was done to improve handling at speed. These locomotives were the predecessors of the AC-12 class cab forward locomotives built during World War II.
