Spacetime triangle diagram technique

Last updated

In physics and mathematics, the spacetime triangle diagram (STTD) technique, also known as the Smirnov method of incomplete separation of variables, is the direct space-time domain method for electromagnetic and scalar wave motion.

Contents

Basic stages

  1. (Electromagnetics) The system of Maxwell's equations is reduced to a second-order PDE for the field components, or potentials, or their derivatives.
  2. The spatial variables are separated using convenient expansions into series and/or integral transforms—except one that remains bounded with the time variable, resulting in a PDE of hyperbolic type.
  3. The resulting hyperbolic PDE and the simultaneously transformed initial conditions compose a problem, which is solved using the Riemann–Volterra integral formula. This yields the generic solution expressed via a double integral over a triangle domain in the bounded-coordinate—time space. Then this domain is replaced by a more complicated but smaller one, in which the integrant is essentially nonzero, found using a strictly formalized procedure involving specific spacetime triangle diagrams (see, e.g., Refs. [1] [2] [3] ).
  4. In the majority of cases the obtained solutions, being multiplied by known functions of the previously separated variables, result in the expressions of a clear physical meaning (nonsteady-state modes). In many cases, however, more explicit solutions can be found summing up the expansions or doing the inverse integral transform.

STTD versus Green's function technique

The STTD technique belongs to the second among the two principal ansätze for theoretical treatment of waves the frequency domain and the direct spacetime domain. The most well-established method for the inhomogeneous (source-related) descriptive equations of wave motion is one based on the Green's function technique. [4] For the circumstances described in Section 6.4 and Chapter 14 of Jackson's Classical Electrodynamics, [4] it can be reduced to calculation of the wave field via retarded potentials (in particular, the Liénard–Wiechert potentials).

Despite certain similarity between Green's and Riemann–Volterra methods (in some literature the Riemann function is called the Riemann–Green function [5] ), their application to the problems of wave motion results in distinct situations:

[7] [8] and it was the Riemann–Volterra representation that Smirnov used in his Course of Higher Mathematics to prove the uniqueness of the solution to the above problem (see, [8] item 143).

are invoked. The Riemann-Volterra approach presents the same or even more serious difficulties, especially when one deals with the bounded-support sources: here the actual limits of integration must be defined from the system of inequalities involving the space-time variables and parameters of the source term. However, this definition can be strictly formalized using the spacetime triangle diagrams. Playing the same role as the Feynman diagrams in particle physics, STTDs provide a strict and illustrative procedure for definition of areas with the same analytic representation of the integration domain in the 2D space spanned by the non-separated spatial variable and time.

Drawbacks of the method

Most important concretizations

General considerations

Several efficient methods for scalarizing electromagnetic problems in the orthogonal coordinates were discussed by Borisov in Ref. [10] The most important conditions of their applicability are and , where are the metric (Lamé) coefficients (so that the squared length element is ). Remarkably, this condition is met for the majority of practically important coordinate systems, including the Cartesian, general-type cylindrical and spherical ones.

For the problems of wave motion is free space, the basic method of separating spatial variables is the application of integral transforms, while for the problems of wave generation and propagation in the guiding systems the variables are usually separated using expansions in terms of the basic functions (modes) meeting the required boundary conditions at the surface of the guiding system.

Cartesian and cylindrical coordinates

In the Cartesian and general-type cylindrical coordinates separation of the spatial variables result in the initial value problem for a hyperbolic PDE known as the 1D Klein–Gordon equation (KGE)

Here is the time variable expressed in units of length using some characteristic velocity (e.g., speed of light or sound), is a constant originated from the separation of variables, and represents a part of the source term in the initial wave equation that remains after application of the variable-separation procedures (a series coefficient or a result of an integral transform).

The above problem possesses known Riemann function

where is the Bessel function of the first kind of order zero.

F140910a STTDmethod F RotatedDomain.gif
Canonical variables ξ, η.
F140910a STTDmethod F zTauDomain.gif
Initial variables z, τ.
The simplest STTD representing a triangle integration domain resulted from the Riemann–Volterra integral formula.

Passing to the canonical variables one gets the simplest STTD diagram reflecting straightforward application of the Riemann–Volterra method, [7] [8] with the fundamental integration domain represented by spacetime triangle MPQ (in dark grey).

Rotation of the STTD 45° counter clockwise yields more common form of the STTD in the conventional spacetime .

For the homogeneous initial conditions the (unique [8] ) solution of the problem is given by the Riemann formula

Evolution of the wave process can be traced using a fixed observation point () successively increasing the triangle height () or, alternatively, taking "momentary picture" of the wavefunction by shifting the spacetime triangle along the axis ().

More useful and sophisticated STTDs correspond to pulsed sources whose support is limited in spacetime. Each limitation produce specific modifications in the STTD, resulting to smaller and more complicated integration domains in which the integrand is essentially non-zero. Examples of most common modifications and their combined actions are illustrated below.

Static limitations to the source area [10]
F140910a STTDmethod F zTau z0.gif
STTD for a source limited from left by plane , i.e. , which is the case, e.g., for a travelling source propagating along a semi-infinite radiator .
F140910a STTDmethod F zTau l.gif
STTD for a source limited from right by plane , i.e.
F140911a STTDmethod F zTau z0l.gif
STTD for a source limited from both sides, i.e. , which is the case, e.g., for a travelling source propagating along a radiator of finite length .
Combined action of limitations of different type, see Refs. [1] [10] [11] [12] [13] for details and more complicated examples
F140911a STTDmethod F zTau front.gif
STTD for a semi-infinite travelling source pulse.
F140911a STTDmethod F zTau frntBack.gif
STTD for a finite travelling source pulse.
F140911a STTDmethod F zTau frntBack z0.gif
STTD for a finite travelling source pulse propagating along a semi-infinite radiator .
F140913a STTDmethod F zTau z0lT S all.gif
A sequence of generic STTDs for a "short", finite source pulse of duration propagating along a finite radiator with a constant velocity .[ citation needed ] In this case the source can be expressed in the form
    where is the Heaviside step function.
F140913a STTDmethod F zTau z0lT L all.gif
The same STTD sequence for a "long" pulse.[ citation needed ]

Spherical coordinates

In the spherical coordinate system — which in view of the General considerations must be represented in the sequence , assuring — one can scalarize problems for the transverse electric (TE) or transverse magnetic (TM) waves using the Borgnis functions, Debye potentials or Hertz vectors. Subsequent separation of the angular variables via expansion of the initial wavefunction and the source

in terms of

where is the associated Legendre polynomial of degree and order , results in the initial value problem for the hyperbolic Euler–Poisson–Darboux equation [3] [10]

known to have the Riemann function

where is the (ordinary) Legendre polynomial of degree .

Equivalence of the STTD (Riemann) and Green's function solutions

The STTD technique represents an alternative to the classical Green's function method. Due to uniqueness of the solution to the initial value problem in question, [8] in the particular case of zero initial conditions the Riemann solution provided by the STTD technique must coincide with the convolution of the causal Green's function and the source term.

The two methods provide apparently different descriptions of the wavefunction: e.g., the Riemann function to the Klein–Gordon problem is a Bessel function (which must be integrated, together with the source term, over the restricted area represented by the fundamental triangle MPQ) while the retarded Green's function to the Klein–Gordon equation is a Fourier transform of the imaginary exponential term (to be integrated over the entire plane , see, for example, Sec. 3.1. of Ref. [14] ) reducible to

Extending integration with respect to to the complex domain, using the residue theorem (with the poles chosen as to satisfy the causality conditions) one gets

Using formula 3.876-1 of Gradshteyn and Ryzhik, [15]

the last Green's function representation reduces to the expression [16]

in which 1/2 is the scaling factor of the Riemann formula and the Riemann function, while the Heaviside step function reduces, for , the area of integration to the fundamental triangle MPQ, making the Green's function solution equal to that provided by the STTD technique.

References and notes

  1. 1 2 A.B. Utkin, Localized Waves Emanated by Pulsed Sources: The Riemann–Volterra Approach. In: Hugo E. Hernández-Figueroa, Erasmo Recami, and Michel Zamboni-Rached (eds.) Non-diffracting Waves. Wiley-VCH: Berlin, ISBN   978-3-527-41195-5, pp. 287–306 (2013)
  2. 1 2 A.B. Utkin, The Riemann–Volterra time-domain technique for waveguides: A case study for elliptic geometry. Wave Motion49(2), 347–363 (2012), doi: 10.1016/j.wavemoti.2011.12.001
  3. 1 2 V.V. Borisov, A.V. Manankova, A.B. Utkin, Spherical harmonic representation of the electromagnetic field produced by a moving pulse of current density, Journal of Physics A: Mathematical and General29(15), 4493–4514 (1996), doi: 10.1088/0305-4470/29/15/020
  4. 1 2 J. D. Jackson, Classical Electrodynamics, 3rd ed., Wiley, New York (1999)
  5. see, e.g., G. A. Korn and T. M. Korn, Mathematical Handbook for Scientists and Engineers, Courier Dover Publications, New York (2000)
  6. A comprehensive discussion of this subject can found in H. Kleinert, Path Integrals in Quantum Mechanics, Statistics, Polymer Physics, and Financial Markets, 5th ed., World Scientific, Singapore (2009)
  7. 1 2 R. Courant and D. Hilbert, Methods of Mathematical Physics, Vol. 2, Wiley, New York (1989)
  8. 1 2 3 4 5 V.I. Smirnov, A Course of Higher Mathematics, Vol. 4: Integral Equations and Partial Differential Equations, Pergamon Press, Oxford (1964)
  9. C.J. Chapman, The spiral Green function in acoustics and electromagnetism, Proc. Roy. Soc. A431(1881), 157–167 (1990), doi: 10.1098/rspa.1990.0124
  10. 1 2 3 4 V.V. Borisov, Electromagnetic Fields of Transient Currents. Leningrad State University Press: Leningrad (1996, in Russian)
  11. V.V. Borisov and A.B. Utkin, The transient electromagnetic field produced by a moving pulse of line current, Journal of Physics D: Applied Physics28(4), 614-622 (1995), doi: 10.1088/0022-3727/28/4/003
  12. A.B. Utkin, Droplet-shaped waves: casual finite-support analogs of X-shaped waves, J. Opt. Soc. Am. A29(4), 457-462 (2012), doi: 10.1364/JOSAA.29.000457
  13. A.B. Utkin, Droplet-shape wave produced by line macroscopic current pulse of finite length, IEEE Xplore DD-2013, ISBN   978-1-4799-1037-3, 145–150 (2013), doi: 10.1109/DD.2013.6712820
  14. W. Geyi, A time-domain theory of waveguide, Progress in Electromagnetics Research59, 267–297 (2006), doi: 10.2528/PIER05102102
  15. Gradshteyn, Izrail Solomonovich; Ryzhik, Iosif Moiseevich; Geronimus, Yuri Veniaminovich; Tseytlin, Michail Yulyevich; Jeffrey, Alan (2015) [October 2014]. "3.876.". In Zwillinger, Daniel; Moll, Victor Hugo (eds.). Table of Integrals, Series, and Products. Translated by Scripta Technica, Inc. (8th ed.). Academic Press, Inc. p. 486. ISBN   978-0-12-384933-5. LCCN   2014010276.
  16. Apparently this result was first published by Geyi (2006: 275), merely as a way to simplify the Green's solution and reduce the domain of integration.

Related Research Articles

Fourier transform Mathematical transform that expresses a function of time as a function of frequency

In mathematics, a Fourier transform (FT) is a mathematical transform that decomposes functions depending on space or time into functions depending on spatial or temporal frequency, such as the expression of a musical chord in terms of the volumes and frequencies of its constituent notes. The term Fourier transform refers to both the frequency domain representation and the mathematical operation that associates the frequency domain representation to a function of space or time.

Partial differential equation Type of multivariable function

In mathematics, a partial differential equation (PDE) is an equation which imposes relations between the various partial derivatives of a multivariable function.

Fractional calculus is a branch of mathematical analysis that studies the several different possibilities of defining real number powers or complex number powers of the differentiation operator D

Instanton

An instanton is a notion appearing in theoretical and mathematical physics. An instanton is a classical solution to equations of motion with a finite, non-zero action, either in quantum mechanics or in quantum field theory. More precisely, it is a solution to the equations of motion of the classical field theory on a Euclidean spacetime.

Theta function Special functions of several complex variables

In mathematics, theta functions are special functions of several complex variables. They are important in many areas, including the theories of Abelian varieties and moduli spaces, and of quadratic forms. They have also been applied to soliton theory. When generalized to a Grassmann algebra, they also appear in quantum field theory.

Proper time Elapsed time between two events as measured by a clock that passes through both events

In relativity, proper time along a timelike world line is defined as the time as measured by a clock following that line. It is thus independent of coordinates, and is a Lorentz scalar. The proper time interval between two events on a world line is the change in proper time. This interval is the quantity of interest, since proper time itself is fixed only up to an arbitrary additive constant, namely the setting of the clock at some event along the world line.

In mathematics, a Dirichlet problem is the problem of finding a function which solves a specified partial differential equation (PDE) in the interior of a given region that takes prescribed values on the boundary of the region.

In physics, the Hamilton–Jacobi equation, named after William Rowan Hamilton and Carl Gustav Jacob Jacobi, is an alternative formulation of classical mechanics, equivalent to other formulations such as Newton's laws of motion, Lagrangian mechanics and Hamiltonian mechanics. The Hamilton–Jacobi equation is particularly useful in identifying conserved quantities for mechanical systems, which may be possible even when the mechanical problem itself cannot be solved completely.

Helmholtz equation Eigenvalue problem for the Laplace operator

In mathematics, the eigenvalue problem for the Laplace operator is known as the Helmholtz equation. It corresponds to the linear partial differential equation:

Variational Bayesian methods are a family of techniques for approximating intractable integrals arising in Bayesian inference and machine learning. They are typically used in complex statistical models consisting of observed variables as well as unknown parameters and latent variables, with various sorts of relationships among the three types of random variables, as might be described by a graphical model. As typical in Bayesian inference, the parameters and latent variables are grouped together as "unobserved variables". Variational Bayesian methods are primarily used for two purposes:

  1. To provide an analytical approximation to the posterior probability of the unobserved variables, in order to do statistical inference over these variables.
  2. To derive a lower bound for the marginal likelihood of the observed data. This is typically used for performing model selection, the general idea being that a higher marginal likelihood for a given model indicates a better fit of the data by that model and hence a greater probability that the model in question was the one that generated the data.

In mathematics, the Gaussian or ordinary hypergeometric function2F1(a,b;c;z) is a special function represented by the hypergeometric series, that includes many other special functions as specific or limiting cases. It is a solution of a second-order linear ordinary differential equation (ODE). Every second-order linear ODE with three regular singular points can be transformed into this equation.

Love wave Horizontally polarized surface waves

In elastodynamics, Love waves, named after Augustus Edward Hough Love, are horizontally polarized surface waves. The Love wave is a result of the interference of many shear waves (S-waves) guided by an elastic layer, which is welded to an elastic half space on one side while bordering a vacuum on the other side. In seismology, Love waves are surface seismic waves that cause horizontal shifting of the Earth during an earthquake. Augustus Edward Hough Love predicted the existence of Love waves mathematically in 1911. They form a distinct class, different from other types of seismic waves, such as P-waves and S-waves, or Rayleigh waves. Love waves travel with a lower velocity than P- or S- waves, but faster than Rayleigh waves. These waves are observed only when there is a low velocity layer overlying a high velocity layer/ sub–layers.

In physics, the algebra of physical space (APS) is the use of the Clifford or geometric algebra Cl3,0(R) of the three-dimensional Euclidean space as a model for (3+1)-dimensional spacetime, representing a point in spacetime via a paravector.

Bring radical Real root of the polynomial x^5+x+a

In algebra, the Bring radical or ultraradical of a real number a is the unique real root of the polynomial

Delay differential equation Type of differential equation

In mathematics, delay differential equations (DDEs) are a type of differential equation in which the derivative of the unknown function at a certain time is given in terms of the values of the function at previous times. DDEs are also called time-delay systems, systems with aftereffect or dead-time, hereditary systems, equations with deviating argument, or differential-difference equations. They belong to the class of systems with the functional state, i.e. partial differential equations (PDEs) which are infinite dimensional, as opposed to ordinary differential equations (ODEs) having a finite dimensional state vector. Four points may give a possible explanation of the popularity of DDEs:

  1. Aftereffect is an applied problem: it is well known that, together with the increasing expectations of dynamic performances, engineers need their models to behave more like the real process. Many processes include aftereffect phenomena in their inner dynamics. In addition, actuators, sensors, and communication networks that are now involved in feedback control loops introduce such delays. Finally, besides actual delays, time lags are frequently used to simplify very high order models. Then, the interest for DDEs keeps on growing in all scientific areas and, especially, in control engineering.
  2. Delay systems are still resistant to many classical controllers: one could think that the simplest approach would consist in replacing them by some finite-dimensional approximations. Unfortunately, ignoring effects which are adequately represented by DDEs is not a general alternative: in the best situation, it leads to the same degree of complexity in the control design. In worst cases, it is potentially disastrous in terms of stability and oscillations.
  3. Voluntary introduction of delays can benefit the control system.
  4. In spite of their complexity, DDEs often appear as simple infinite-dimensional models in the very complex area of partial differential equations (PDEs).

In theory of vibrations, Duhamel's integral is a way of calculating the response of linear systems and structures to arbitrary time-varying external perturbation.

The Volterra series is a model for non-linear behavior similar to the Taylor series. It differs from the Taylor series in its ability to capture "memory" effects. The Taylor series can be used for approximating the response of a nonlinear system to a given input if the output of this system depends strictly on the input at that particular time. In the Volterra series the output of the nonlinear system depends on the input to the system at all other times. This provides the ability to capture the "memory" effect of devices like capacitors and inductors.

In physics, droplet-shaped waves are casual localized solutions of the wave equation closely related to the X-shaped waves, but, in contrast, possessing a finite support.

A functional differential equation is a differential equation with deviating argument. That is, a functional differential equation is an equation that contains some function and some of its derivatives to different argument values.

Tau functions are an important ingredient in the modern theory of integrable systems, and have numerous applications in a variety of other domains. They were originally introduced by Ryogo Hirota in his direct method approach to soliton equations, based on expressing them in an equivalent bilinear form. The term Tau function, or -function, was first used systematically by Mikio Sato and his students in the specific context of the Kadomtsev–Petviashvili equation, and related integrable hierarchies. It is a central ingredient in the theory of solitons. Tau functions also appear as matrix model partition functions in the spectral theory of Random Matrices, and may also serve as generating functions, in the sense of combinatorics and enumerative geometry, especially in relation to moduli spaces of Riemann surfaces, and enumeration of branched coverings, or so-called Hurwitz numbers.