This article relies largely or entirely on a single source .(July 2022) |
120 mm Gun Tank T110 | |
---|---|
Type | Heavy tank |
Place of origin | United States |
Service history | |
Used by | United States Army (planned) |
Production history | |
Designer | Chrysler |
Manufacturer | Detroit Arsenal Tank Plant (planned) |
No. built | 1 mockup |
Specifications | |
Mass | ~50 tons |
Crew | 4 or 5 |
The 120 mm Gun Tank T110, known during early development as the TS-31, was a canceled heavy tank project which began in 1954. It was an attempt to replace the T43 heavy tank. The T110 tank was a proposal created by Detroit Arsenal, and was introduced in a Detroit conference held in 1954. It was further developed by Chrysler.
Development was canceled due to the satisfactory results of the T43 (M103). The tank was planned to be powered by a Continental AVI-1790-8 engine power plant delivering around 875 hp or Continental AOI-1490-1 delivering around 700 hp.
Beginning in 1952, the first Question Mark conference was held at Detroit Arsenal in Warren, Michigan. The goal of these annual conferences was to facilitate collaboration between tank designers and tank users. [1]
The third conference in 1954 saw proposals to replace the T43E1. Six designs were proposed. [1]
TS-2 was armed with 105 mm T210 smoothbore gun in a rotating turret and equipped with Continental AOI-1490-1 powerplant. TS-5 was armed with 105 mm T210 smoothbore gun in a fixed superstructure and equipped with Continental AOI-1490-1 powerplant. TS-6 was armed with a 120 mm T123E1 rifled gun in a rotating turret and equipped with a Continental AVI-1790-8 powerplant. TS-31 was equipped with a 120 mm T123E1 rifled gun in a fixed superstructure located at the rear of the hull. These four designs were considered short-term prospects, requiring about two years of development. [2] Chrysler was chosen to further develop the TS-31, which was redesignated the T110. [3]
TL-4 and TL-6 were more long-term prospects armed with the smoothbore T210 120 mm guns. Ford Motor Company was awarded a contract for the TL-4, which was redesignated the T96. It was later decided to instead combine the T96 program with the T95 medium tank project, and the T95E4 with the T96 turret was born. [4]
AV-1790 engine. XTG-500 transmission. T123E1 gun. Gun mounted in a limited traverse gimbal mount. [5]
Cab width reduced to fit major rail tunnels. Commander relocated to center rear and driver relocated from hull to cab. [3]
Relocated the transmission from the front hull to the engine compartment. Crew arrangement changes in revision 1 reverted. AV-1790 replaced by Continental AOI-1490. Gun traverse was 15 degrees to each side, with 20 degrees of gun elevation and 10 degrees of gun depression. [3]
Power pack mounted on rails for ease of maintenance. Aborted due to numerous difficulties this arrangement introduced. [6]
Engine and transmission (now XTG-510) moved to rear. [6]
The gun was made fully traversable using the turret ring of the M103. One mockup was built. Crew was reduced to 4 by removing one loader and the addition of gun rammer. Program was subsequently terminated as the T43E2 project had proved successful. [7]
The M26 Pershing is a heavy tank/medium tank formerly used by the United States Army. It was used in the last months of World War II during the Invasion of Germany and extensively during the Korean War. The tank was named after General of the Armies John J. Pershing, who led the American Expeditionary Force in Europe in World War I.
The MBT-70 was an American–West German joint project to develop a new main battle tank during the 1960s.
The M48 Patton is an American first-generation main battle tank (MBT) introduced in February 1952, being designated as the 90mm Gun Tank: M48. It was designed as a replacement for the M26 Pershing, M4 Sherman, M46 and M47 Patton tanks, and was the main battle tank of the U.S. Army and U.S. Marine Corps in the Vietnam War. Nearly 12,000 M48s were built, mainly by Chrysler and American Locomotive Company, from 1952 to 1961. The M48 Patton was the first U.S. medium gun tank with a four-man crew, featuring a centerline driver's compartment and no bow machine gunner. As with nearly all new armored vehicles it had a wide variety of suspension systems, cupola styles, power packs, fenders and other details among individual tanks.
The M60 is an American second-generation main battle tank (MBT). It was officially standardized as the Tank, Combat, Full Tracked: 105-mm Gun, M60 in March 1959. Although developed from the M48 Patton, the M60 tank series was never officially christened as a Patton tank. It has been called a "product-improved descendant" of the Patton tank's design. The design similarities are evident comparing the original version of the M60 and the M48A2. The United States fully committed to the MBT doctrine in 1963, when the Marine Corps retired the last (M103) heavy tank battalion. The M60 tank series became America's primary main battle tank during the Cold War, reaching a production total of 15,000 M60s. Hull production ended in 1983, but 5,400 older models were converted to the M60A3 variant ending in 1990.
A tank gun is the main armament of a tank. Modern tank guns are high-velocity, large-caliber artilleries capable of firing kinetic energy penetrators, high-explosive anti-tank, and cannon-launched guided projectiles. Anti-aircraft guns can also be mounted to tanks.
The T28 Super Heavy Tank was an American super-heavy tank/assault gun designed for the United States Army during World War II. It was originally designed to break through German defenses of the Siegfried Line and was later considered as a possible participant in the planned invasion of the Japanese mainland.
The M103 Heavy Tank was a heavy tank that served in the United States Army and the United States Marine Corps during the Cold War. Introduced in 1957, it served until 1974, by which time evolution of the concept of a main battle tank considered heavy tanks obsolete.
The T95 was an American prototype medium tank developed from 1955 to 1959. These tanks used many advanced or unusual features, such as siliceous-cored armor, new transmissions, and OPTAR fire-control systems. The OPTAR incorporated an electro-optical rangefinder and was mounted on the right side of the turret, and was used in conjunction with the APFSDS-firing 90 mm T208 smoothbore gun, which had a rigid mount without a recoil system. In addition, although the tanks were designed with a torsion beam suspension, a hydropneumatic suspension was fitted, and one of the tanks was fitted with a Solar Saturn gas turbine for demonstration purposes.
The M2 light tank, officially Light Tank, M2, was an American light tank of the interwar period which saw limited service during World War II. The most common model, the M2A4, was equipped with one 37 mm (1.5 in) M5 gun and five .30 cal M1919 Browning machine guns.
The Heavy Tank T30 was a World War II American tank project developed to counter new German tanks, such as Tiger I, Tiger II, and tank destroyers, such as the Jagdtiger, or Soviet heavy tanks, such as IS-2 or IS-3. The T30 was designed at the same time as the T29 Heavy Tank.
The Heavy Tank M6 was an American heavy tank designed during World War II. The tank was produced in small numbers and never saw combat.
Tank development both evolved considerably from World War II and played a key role during the Cold War (1945–1990). The period pitted the nations of the Eastern Bloc and the North Atlantic Treaty Organization (NATO against each other.
The 120 mm Gun M1 was the United States Army's standard super-heavy anti-aircraft gun during World War II and the Korean War, complementing the smaller and more mobile M2 90 mm gun in service. Its maximum altitude was about 60,000 ft (18,000 m), which earned it the nickname stratosphere gun.
The Heavy Tank T29 was an American heavy tank project started in March 1944 to counter the appearance of the German Tiger II heavy tank. The T29 was not ready in time for the war in Europe, but it did provide post-war engineers with opportunities for applying engineering concepts to artillery and automotive components.
This article deals with the history and development of American tanks from the end of World War II and during the Cold War.
The Versuchsträger1–2 were two German prototype twin gun turretless main battle tanks. Since the early 1970s a number of West German companies have been working on conceptual designs for a successor to the Leopard 1. This project had the name Kampfpanzer 3. The KPz 3 project was temporarily a British-German joint project, until the UK withdrew because they wanted a turreted tank. The Germans had already developed the Leopard 2 and therefore didn't see the need for another conventional tank. One of the companies involved was MaK, developing the VT 1-1 and VT 1–2. The test programme ended proving that a twin-gunned turretless tank could be created with enough technical effort, but had drawbacks in both practical and tactical use.
Object 187, was a Soviet experimental main battle tank developed between the late 1980s and middle 1990s. It remains a relatively unpublicized development because of high levels of secrecy surrounding the project.
The T1 light tank was a United States Army light tank of the late 1920s and early 1930s that was only built in prototype form. The tank was an Army design built by James Cunningham, Son and Company. Introduced in 1927, it was developed up through 1932 as a series of modified versions. The tank was never mass-produced, nor was it ever used in combat.
The T57 heavy tank was an experimental heavy tank developed by the American military during the Cold War era as a further development of the M103 heavy tank. Featuring heavy armor and a long range 120 mm rifled gun, the T57 was supposed to serve as a replacement to the M103 in service with American heavy tank units in Europe. Armor on the hull front was to range between 5–8 in (130–200 mm) in thickness and the turret was to be 5.98 in (152 mm) at maximum on all sides. Like the French AMX 50 project, it was to feature an oscillating turret and was also to receive a 153 mm gun. Experiments were also conducted to investigate mounting a 203 mm gun, but this was soon found to be infeasible. When multiple problems were discovered in the turret oscillation system on account of the excess weight of the heavily armored turret and the gun, the project was dropped.
The T34 Heavy Tank was an American design for a heavy tank. It evolved from the T29 Heavy Tank and T30 Heavy Tank in 1945, using the same chassis, but sporting a 120 mm (4.72 in) modified 120 mm Gun M1 anti-aircraft gun. Extra armor plating was applied to the rear of the turret bustle as a counterweight for the heavier 120mm T53 main gun. No production orders were placed for the T34, which was felt to be too heavy.