Aksungur | |
---|---|
TAI Aksungur at the 2019 International Defence Industry Fair in Istanbul, Turkey. | |
Role | Unmanned combat aerial vehicle |
National origin | Turkey |
Manufacturer | Turkish Aerospace Industries (TAI) |
First flight | 20 March 2019 [1] |
Introduction | 20 October 2021 [2] |
Status | In service |
Primary user | Turkish Armed Forces |
Produced | 2019-present |
Number built | 12 (as of March 2023) [3] |
The TAI Aksungur (previously known as Anka-2) [4] is an unmanned combat aerial vehicle (UCAV) built by Turkish Aerospace Industries (TAI) for the Turkish Armed Forces. [1] [5] [6] [7] Using existing technology from the TAI Anka series of drones, it is the manufacturer's largest drone [8] with payload capacity for mission-specific equipment. It is intended to be used for long-term surveillance, signals intelligence, maritime patrol missions, or as an unmanned combat aerial vehicle. TAI planned to integrate weapon packages and put the Aksungur into production in early 2020. The first unit was delivered to the Turkish Naval Forces on 20 October 2021. [2]
Aksungur, Turkish for gyrfalcon, [6] is classified as a medium-altitude long-endurance (MALE) unmanned aerial vehicle (UAV). It is designed and manufactured by Turkish Aerospace Industries (TAI) for tactical surveillance and reconnaissance missions of the Turkish Armed Forces. [7] The Aksungur has twin turbocharged engines with a twin boom configuration. [1]
Developing the UAV took 18 months. [5] [6] The airframe, wing and landing gear are new designs, while control systems are from the existing TAI Anka family of drones. [8] [9] A new turbodiesel engine is also in development for the programme, with initial flight tests of the airframe using an existing engine. [10] Two prototypes were manufactured for testing purposes. Its maiden flight, displaying automatic takeoff and landing capabilities, took place on 20 March 2019, and lasted four hours and twenty minutes. [5] [6] Reportedly, a second test flight of three hours was performed on 3 April the same year. [1] It was introduced at the 2019 International Defence Industry Fair (IDEF) in Istanbul, Turkey, on 30 April. [5] [6] CNN Türk reported ongoing flight tests in July 2019, [11] with the manufacturer anticipating a total of 50 to 60 tests by the end of the year. [9] The UAV is planned to go into series production by the first quarter of 2020. [1]
The aircraft is 12 m (39 ft) long and 3 m (9.8 ft) high when resting on its landing gear. The high-mounted wings have a slight dihedral angle and a wingspan of 24 m (79 ft). [1] The wings end with small winglets. The centralized fuselage is under the wings and houses avionics, camera and sensors systems, with a chin-mounted camera blister. Fuel is stored in the fuselage [12] and wings. A turbocharged engine is mounted under each wing, with the engine nacelles each extending backward into a tail boom. These tail booms terminate in vertical stabilizers, with a horizontal tailplane joining them. [1] The tricycle landing gear retracts into the engine nacelles and the nose of the aircraft while in flight. [12]
The aircraft is powered by two forward-mounted PD-170 dual-turbocharged diesel engines developed by Tusaş Engine Industries (TEI), equipped with three-bladed propellers in a tractor (puller) configuration. [1] According to the manufacturer, these enable the Aksungur to cruise at a maximum speed of 180 km/h (110 mph) and carry a maximum payload of 750 kg (1,650 lb) [5] [6] to an altitude of 25,000 ft (7,600 m), or ascend to 35,000 ft (11,000 m) with a 150 kg (330 lb) payload. The aircraft's designed maximum payload is 375% greater than that of its predecessor; [5] its maximum takeoff weight is 3,300 kg (7,300 lb). It is rated to stay aloft 12 hours as an attack aircraft or maritime patrol aircraft and 24 hours during signals intelligence missions. [7]
Remote control of the UAV is performed by DO-178B compatible software on DO-254 compatible ground control station and hardware using double backed-up encrypted digital data link. Optional beyond-visual-range operation flexibility is available via communications satellite. [7]
TAI expects to integrate weapon systems typical of F-4 and F-16 fighter aircraft [9] onto Aksungur in the last quarter of 2019. [13] Three hardpoints are situated under each wing for attaching external payloads, such as munitions or sonar buoys. [1] [8] These hardpoints are rated for loads of 150, 300 and 500 kg (330, 660 and 1,100 lb). Proposed armaments include TEBER-81 (laser-guided bomb Mk-81), TEBER-82 (laser-guided bomb Mk-82), LUMTAS, MAM-L, Roketsan Cirit, MAM-C, HGK-3 (precision-guided munition), KGK (82) (winged guided kit), and miniature bomb. [7]
In October 2022, Turkey deployed Aksungur drones in the Aegean Sea to place Sonobuoy in order to find Greek submarines. [14]
In November 2023, a Turkish Navy Aksungur, serial TCB883, crashed in North Iraq. [15] [16]
In May 2024, a Turkish Army Aksungur was shot down by PKK at Qandil Mountains region of Iraq during an anti-terror operation of the Army. [17]
In August 2024, another Aksungur drone was shot down by Iraqi Army Pantsir Air Defence system in Kirkuk. [18] [19]
Chadian Air Force released footage of its Aksungur fleet in April 2024. [23]
Data from Tusaş, Jane's Information Group and Military Factory [25] [26] [27]
General characteristics
Performance
Armament
Other UCAVs of Turkey
An unmanned combat aerial vehicle (UCAV), also known as a combat drone, fighter drone or battlefield UAV, is an unmanned aerial vehicle (UAV) that is used for intelligence, surveillance, target acquisition, and reconnaissance and carries aircraft ordnance such as missiles, anti-tank guided missiles (ATGMs), and/or bombs in hardpoints for drone strikes. These drones are usually under real-time human control, with varying levels of autonomy. UCAVs are used for reconnaissance, attacking targets and returning to base; unlike kamikaze drones which are only made to explode on impact, or surveillance drones which are only for gathering intelligence.
Turkish Aerospace Industries Inc. is the center of technology in design, development, manufacturing, integration of aerospace systems, modernization and after sales support in Turkey.
The TAI Anka is a family of unmanned aerial vehicles developed by Turkish Aerospace Industries primarily for the Turkish Air Force. Envisioned in the early 2000s for aerial surveillance and reconnaissance missions, Anka has evolved into a modular platform with synthetic-aperture radar, precise weapons and satellite communication.
The DRDO Rustom is a family of medium-altitude long-endurance (MALE) unmanned air vehicle (UAV) being developed by the Defence Research and Development Organisation (DRDO) for the three services, Indian Army, Indian Navy and the Indian Air Force, of the Indian Armed Forces. Rustom is derived from the NAL's LCRA developed by a team under the leadership of late Professor Rustom Damania in the 1980s. The UAV will have structural changes and a new engine.
UMTAS or Mizrak-U(Uzun Menzilli Tanksavar Sistemi) is a modern long range air-to-surface anti-tank guided missile developed by Turkish armor and missile manufacturer Roketsan.
The Chengdu GJ-1, also known as Wing Loong 1, is a Medium-Altitude Long-Endurance (MALE) unmanned aerial vehicle (UAV), developed by the Chengdu Aircraft Industry Group in the People's Republic of China. Intended for use as a surveillance and aerial reconnaissance platform, the Pterodactyl I is capable of being fitted with air-to-surface weapons for use in an unmanned combat aerial vehicle (UCAV) role.
The Vestel Karayel is a surveillance, reconnaissance and later combat unmanned aerial vehicle system developed by Vestel Savunma later the company renamed as Lentatek. The drone is currently operated by Turkish Armed Forces and the Armed Forces of Saudi Arabia.
TAI Turna is a turboprop-powered radio-controlled target drone introduced in 2001. Designed, developed and built by Turkish Aerospace Industries (TAI) and powered by an engine manufactured by Tusaş Engine Industries (TEI), the unmanned aerial vehicle (UAV) is in use by the Turkish Armed Forces in target tracking and gunnery firing exercises.
TAI Gözcü is a radio-controlled short-range tactical drone. Designed, developed and built by Turkish Aerospace Industries (TAI), the unmanned aerial vehicle (UAV) is in use by the Turkish Armed Forces for intelligence, surveillance, target acquisition and reconnaissance purposes. Gözcü is the Turkish word for observer.
TAI Baykuş is a radio-controlled tactical unmanned drone designed, developed and built by Turkish Aerospace Industries (TAI) between 2003-2004.
The Bayraktar UAV or Bayraktar UCAV is a family of unmanned aerial vehicles designed and manufactured by Turkish company Baykar. The UAVs were developed for the Turkish Armed Forces from 2004 until the present. Some models are designed for surveillance and reconnaissance only, others are capable of tactical ground-strike missions. Baykar is also developing drones to counter other aerial systems. The word bayraktar means flag-bearer in Turkish.
Bayraktar Akıncı is a high-altitude long-endurance (HALE) unmanned combat aerial vehicle (UCAV) being manufactured by the Turkish defence company Baykar. The first three units entered service with the Turkish Armed Forces on 29 August 2021.
The Bayraktar TB2 is a medium-altitude long-endurance (MALE) unmanned combat aerial vehicle (UCAV) capable of remotely controlled or autonomous flight operations. It is manufactured by the Turkish company Baykar Makina Sanayi ve Ticaret A.Ş., primarily for the Turkish Armed Forces. The aircraft are monitored and controlled by an aircrew in a ground control station, including weapons employment. The development of the UAV has been largely credited to Selçuk Bayraktar, a former MIT graduate student.
Mini Akıllı Mühimmat (MAM), meaning "smart micro munition" is a family of laser-guided and/or GPS/INS guided bombs produced by Turkish defence industry manufacturer Roketsan.
The Shahpar-ll is an unmanned combat aerial vehicle (UCAV) built by Global Industrial Defence Solutions of Pakistan. It is currently in production following the completion of a test and qualification phase.
The Bayraktar Kızılelma is a single-engine, low-observable, carrier-capable, jet-powered unmanned combat aerial vehicle (UCAV), currently in development by Turkish defense company Baykar. The aircraft is being developed as part of Project MIUS. The initial Bayraktar Kızılelma (Kızılelma-A) is subsonic. Planned variants are intended to be supersonic, the latter having a twin-engined configuration. It is one of the two Turkish jet-powered stealth UCAV along with TAI Anka-3.
The Tengden TB-001 is a medium-altitude long-endurance (MALE) unmanned combat aerial vehicle (UCAV) designed by Sichuan Tengden. It is used by the People's Liberation Army.
The Baykar Bayraktar TB3 is a Turkish medium-altitude long-endurance (MALE) unmanned combat aerial vehicle (UCAV) capable of short-range landing and take-off, produced by Baykar. According to the initial plans, the ship TCG Anadolu was expected to be equipped with Lockheed Martin F-35B Lightning II fighter jets but the vessel entered a modification process to allow it to be able to accommodate UAVs such as Bayraktar TB3 following the removal of Turkey from the F-35 procurement program.
The Anka-3 is a flying wing type stealth UCAV currently in development by Turkish Aerospace Industries. It is one of two Turkish jet-powered stealth UCAVs developed as part of Project MIUS, along with the Bayraktar Kızılelma.