In parliamentary procedure, the verb to table has the opposite meaning in the United States from that of the rest of the world:
Motions which use the word "table" have specific meanings and functions, depending on the parliamentary authority used. The meaning of "table" also depends on the context in which it is used.
Both the American and the British dialects have the expression "to table a topic" as a short way of saying "to lay a topic on the table" and "to make a topic lie on the table", but these have opposite meanings in the different varieties of the languages. The British meaning is based on the idea of parliamentarians gathering around a table with the bill laid upon so that all may point to sections for discussion. The American sense draws on the image of taking a paper that one has been examining and laying it aside, ending any discussion about it. The phrase "put on the table" can have the same meaning of "making the issue available for debate" in both dialects. [1] [2] [3] According to the American Heritage Dictionary, on the table in American English always has the two opposite meanings up for discussion and put aside for consideration at a later date depending on the context. [4]
The British meaning of to "table" is to begin consideration of a proposal. [1] This comes from the use of the term to describe physically laying legislation on the table in the British Parliament; once an item on the order paper has been laid on the table, it becomes the current subject for debate. [5]
The American meaning of "to table" is to postpone or suspend consideration of a motion. [1] In American usage, to allow consideration of the topic again, it would have to be "taken from the table". The use of expressions such as "tabling a motion" for setting aside or killing a main motion can cause confusion due to the usage of such expressions in the United Kingdom and Commonwealth countries, where they have the opposite meaning—that is, to propose a motion for consideration. [6] [7] To make the intent clear internationally, the Congressional Quarterly and its associated CQ publications usually follow the word "table" (as used in Congress) with the word "kill" in parentheses in reporting congressional votes. [8] [9]
Class | Subsidiary motion |
---|---|
In order when another has the floor? | No |
Requires second? | Yes |
Debatable? | No |
May be reconsidered? | Negative vote only |
Amendable? | No |
Vote required | Majority |
Under Robert's Rules of Order Newly Revised , the subsidiary motion to lay on the table is properly used only when it is necessary to suspend consideration of a main motion in order to deal with another matter that has come up unexpectedly and which must be dealt with before the pending motion can be properly addressed. [10] It has, however, become common to misuse this motion to end consideration of the pending main motion without debate, or to mistakenly assume that its adoption prevents further consideration of the main motion at all, or until a specified time. [11] [12] Using "table" as a verb usually indicates misuse of this motion. [13] The book states, "It is preferable to avoid moving 'to table' a motion, or 'that the motion be tabled.'" [13]
Class | Motion that brings a question again before the assembly |
---|---|
In order when another has the floor? | No |
Requires second? | Yes |
Debatable? | No |
May be reconsidered? | No |
Amendable? | No |
Vote required | Majority |
A main motion that has been laid on the table may be taken up again by adoption of a motion to take from the table. [14] A motion can be taken from the table at the same session (or meeting) or at the next session (or meeting) if that session occurs within a quarterly time interval. [15] Otherwise, the motion dies. [15]
The use of the motion to lay on the table to kill a motion is improper; instead, a motion to postpone indefinitely should be used. [12] Similarly, it is improper to use the motion to lay on the table to postpone something; a motion to postpone to a certain time should be used in this case. [11] If debate is not desired, a motion to close debate (the previous question) should be used. [12] One of the disadvantages of trying to kill a measure by laying it on the table is that, if some opponents of the measure subsequently leave the meeting, a temporary majority favoring the measure can then take it from the table and act on it; or they may do so at the next session if held within a quarterly time interval. [16]
Although the motion to lay on the table is not debatable, the chair can ask the maker of the motion to state his reason in order to establish the urgency and legitimate intent of the motion or the maker can state it on his own initiative. [17]
The Standard Code of Parliamentary Procedure has a motion to table. It can temporarily set aside a main motion (in which case it is also called the motion to postpone temporarily, a motion not in RONR) or it can kill the main motion without a direct vote or further debate. [18] TSC uses the short form, "table", which is discouraged by RONR. [13] [18] If the motion to table is used in circumstances suggesting that the purpose is to kill the main motion, a two-thirds vote should be required. [18]
In TSC, the motion to take from the table must be made prior to the end of the current session, unlike RONR, which permits the motion to be made prior to the end of the following session if it is held within a quarterly time interval. The preferred name of the motion to take from the table, under TSC, is the motion to resume consideration.
Demeter's Manual of Parliamentary Law and Procedure generally follows the model of TSC where the motion may be used to delay consideration of a main motion or to kill a motion without direct vote. [19] This book also differs from RONR in that it allows the verbiage "to table". It ranks as the highest subsidiary motion and is not debatable, amendable, or eligible for reconsideration. Generally speaking, Demeter's allows all motions to be tabled except subsidiary motions, privileged motions, appeals of any kind, and motions concerning nominations or polls. [20]
In both houses of the United States Congress, the motion to table is used to kill a motion without debate or a vote on the merits of the resolution. [21] The rules do not provide for taking the motion from the table, and therefore consideration of the motion may be resumed only by a two-thirds vote to suspend the rules. [22]
Most state legislatures use Mason's Manual of Legislative Procedure . In this book, the motions to lay on the table and to take from the table have the same characteristics as under RONR. [23] Mason's Manual has another motion, take from the desk, which a member uses when they desire to take up a matter that is on the desk, but on which no action has yet been taken. [24] The differences between the two motions are that the motion to take from the table is used after an item has been placed on the desk by a previous use of a motion to lay on the table and the motion is given a preference over new main motions offered at the same time. Take from the desk is used when an item is taken up that has not yet been introduced and this motion has no preference over new main motions that may be made at the same time. [24]
In the Parliament of the United Kingdom and other parliaments based on the Westminster system, to "table" a measure means to propose it for consideration, as in bringing it to the table. [5] [6] [7] In his book (The Second World War, Volume III, The Grand Alliance), Winston Churchill relates the confusion that arose between American and British military leaders during the Second World War: [25]
The enjoyment of a common language was of course a supreme advantage in all British and American discussions. The delays and often partial misunderstandings which occur when interpreters are used were avoided. There were however differences of expression, which in the early days led to an amusing incident. The British Staff prepared a paper which they wished to raise as a matter of urgency, and informed their American colleagues that they wished to "table it." To the American Staff "tabling" a paper meant putting it away in a drawer and forgetting it. A long and even acrimonious argument ensued before both parties realized that they were agreed on the merits and wanted the same thing.
The Canadian meaning of to "table" in a parliamentary context is the British meaning to begin consideration of a proposal. [26] In a non-parliamentary context the British meaning is generally preferred but the American meaning of to "table" is also occasionally encountered; to prevent confusion over the contradictory meanings, the Canadian Oxford Dictionary recommends using a different verb altogether in non-parliamentary contexts. [27]
Robert's Rules of Order, often simply referred to as Robert's Rules, is a manual of parliamentary procedure by U.S. Army officer Henry Martyn Robert. "The object of Rules of Order is to assist an assembly to accomplish the work for which it was designed [...] Where there is no law [...] there is the least of real liberty". The term "Robert's Rules of Order" is also used more generically to refer to any of the more recent editions, by various editors and authors, based on any of Robert's original editions, and the term is used more generically in the United States to refer to parliamentary procedure.
In parliamentary procedure, an adjournment ends a meeting. It could be done using a motion to adjourn. A time for another meeting could be set using the motion to fix the time to which to adjourn.
A censure is an expression of strong disapproval or harsh criticism. In parliamentary procedure, it is a debatable main motion that could be adopted by a majority vote. Among the forms that it can take are a stern rebuke by a legislature, a spiritual penalty imposed by a church, or a negative judgment pronounced on a theological proposition. It is usually non-binding, unlike a motion of no confidence.
In deliberative bodies a second to a proposed motion is an indication that there is at least one person besides the mover that is interested in seeing the motion come before the meeting. It does not necessarily indicate that the seconder favors the motion.
An agenda is a list of meeting activities in the order in which they are to be taken up, beginning with the call to order and ending with adjournment. It usually includes one or more specific items of business to be acted upon. It may, but is not required to, include specific times for one or more activities. An agenda may also be called a docket, schedule, or calendar. It may also contain a listing of an order of business.
A repeal is the removal or reversal of a law. There are two basic types of repeal; a repeal with a re-enactment is used to replace the law with an updated, amended, or otherwise related law, or a repeal without replacement so as to abolish its provisions altogether.
In US parliamentary procedure, the previous question is generally used as a motion to end debate on a pending proposal and bring it to an immediate vote. The meaning of this specialized motion has nothing to do with any question previously considered by the assembly.
In parliamentary procedure, reconsideration of a motion may be done on a matter previously decided. The motion to "reconsider" is used for this purpose. This motion originated in the United States and is generally not used in parliaments. A special form of this motion is reconsider and enter on the minutes.
In parliamentary procedure, an objection to the consideration of a question is a motion that is adopted to prevent an original main motion from coming before the assembly. This motion is different from an objection to a unanimous consent request.
In parliamentary procedure, the motion to postpone indefinitely is a subsidiary motion used to kill a main motion without taking a direct vote on it. This motion does not actually "postpone" it.
In parliamentary procedure, the motion to amend is used to modify another motion. An amendment could itself be amended. A related procedure is filling blanks in a motion.
In parliamentary procedure, a motion to appeal from the decision of the chair is used to challenge a ruling of the chair.
In certain countries, a motion in parliamentary procedure is a formal proposal by a member of a deliberative assembly that the assembly take certain action. Such motions, and the form they take are specified by the deliberate assembly and/or a pre-agreed volume detailing parliamentary procedure, such as Robert's Rules of Order; The Standard Code of Parliamentary Procedure; or Lord Citrine's The ABC of Chairmanship. Motions are used in conducting business in almost all legislative bodies worldwide, and are used in meetings of many church vestries, corporate boards, and fraternal organizations.
In United States parliamentary procedure, a suspension of the rules allows a deliberative assembly to set aside its normal rules to do something that it could not do otherwise. However, there are rules that cannot be suspended.
In parliamentary procedure in the United States, a motion to postpone to a certain time is used to delay action on a pending question until a different day, meeting, hour or until after a certain event. Then, when that time comes, the consideration of the question is picked up where it was left off when it was postponed.
In parliamentary procedure, a motion for division of a question is used to separate a motion into a set of motions.
Debate in parliamentary procedure refers to discussion on the merits of a pending question; that is, whether it should or should not be agreed to. It is also commonly referred to as "discussion".
In parliamentary procedure, requests and inquiries are motions used by members of a deliberative assembly to obtain information or to do or have something done that requires permission of the assembly. Except for a request to be excused from a duty, these requests and inquiries are not debatable nor amendable.
Parliamentary procedure is the body of rules, ethics, and customs governing meetings and other operations of clubs, organizations, legislative bodies, and other deliberative assemblies. General principles of parliamentary procedure include rule of the majority with respect for the minority.
You put everything on the table.
...the President is prepared to put on the table...
Table a Bill: Motion to kill a bill by cutting off consideration of it. Such motions are not debatable.
Voting to table (kill) the amendment...
The purpose of the motion to Lay on the Table is to enable an assembly, by majority vote and without debate, to lay a pending question aside temporarily when something else of immediate urgency has arisen or when something else needs to be addressed before consideration of the pending question is resumed. In ordinary societies it is rarely needed, and hence seldom in order.
motion to table - A non-debatable motion in the House and Senate (and in their committees) by which a simple majority may agree to negatively and permanently dispose of a question (e.g., an amendment).