Telechron is the name of a U.S. company that manufactured electric clocks between 1912 and 1992. "Telechron" is derived from the Greek words tele, meaning "far off," and chronos, "time," thus referring to the transmission of time over long distances. Founded by Henry Ellis Warren, Telechron introduced the synchronous electric clock, which keeps time by the oscillations of the alternating current electricity that powers it from the electric power grid. Telechron had its heyday between 1925 and 1955, when it sold millions of electric clocks to American consumers.
Henry Warren: the Synchronous Motor and the Master Clock
Warren master clock, installed in utility power plants, made accurate synchronous clocks possible.
Henry E. Warren established the company in 1912 in Ashland, Massachusetts. Initially, it was called "The Warren Clock Company," producing battery-powered clocks. These proved unreliable, however, since batteries weakened quickly, which resulted in inaccurate time-keeping. Warren saw electric motors as the solution to this problem. In 1915, he invented a self-starting synchronous motor consisting of a rotor and a coil, which was patented in 1918.[1] A synchronous motor spins at the same rate as the cycle of the alternating current driving it. Synchronous electric clocks had been available previously, but had to be started manually. In later years, Telechron would advertise its clocks as "bringing true time," because power plants had begun to maintain frequency of the alternating current very close to an average of 60 Hz.
But such constancy did not yet exist when Warren first experimented with his synchronous motors. Irregularities in the frequency of the alternating current led not only to inaccurate time-keeping but, more seriously, to incompatible power grids in the United States, as power could not readily be transferred from one grid to another. In order to overcome these problems, Warren invented a "master clock," which he installed at the Boston Edison Company in 1916.
This master clock had two movements, one driven by a synchronous motor connected to the current produced by the power plant, the other driven by a traditional spring and pendulum. The pendulum was adjusted twice a day in accordance with time signals received from the Naval Observatory. As long as the hands of the electric clock, powered by a 60Hz synchronous motor, moved along perfectly with those of the "traditional" clock, the power produced by the electric company was uniform.[2] In Electrifying Time, Jim Linz writes that "in 1947, Warren Master Clocks regulated over 95 percent of the electric lines in the United States."[3]
It is interesting to note, then, that the uniformity of alternating current in the United States, which was necessary in order to build large power grids, was initially ensured by a very traditional clock system. Furthermore, Henry Warren invented his master clock at first simply in order to guarantee that his synchronous clock motor would provide accurate time.
Telechron and Art Deco
The Telechron company's success from the 1920s into the 1950s was not solely due to the technical advantages of their clocks, although all Telechron clocks were powered by successive versions of Henry Warren's synchronous motor.[4] Rather, the Telechron company sought to produce clocks whose designs reflected one of the fundamental principles of the Art Deco movement: to combine modern engineering (including mass-production) with the beauty of simple geometric shapes. Thus, Telechron clocks are often considered genuine pieces of art—but art affordable by all, as thousands of them were made. The company employed some of the finest designers of the time, such as Leo Ivan Bruce (1911–1973) and John P. Rainbault. In the evolution of their designs, Telechron clocks were a faithful mirror of their own time. Just as a clock like the "Administrator" (designed by Leo Ivan Bruce) reflected thirties aesthetics, so the "Dimension" had 1950s lines. Telechrons were relatively expensive compared to other clocks. In 1941, their most inexpensive alarm clock was the model 7H117 "Reporter," and it sold for $2.95, the equivalent of $30.00 in 2008 funds. But their beautiful design and amazing reliability assured a brisk market for them throughout the company's most prosperous years.
Telechron 355 "Cathedral" (1927–32)
Telechron 2H07-Br "Administrator" (1937–40)
Telechron 7F72 "Heralder" (1930s)
Telechron 8B23 "Register" (1946–48)
Telechron 7H141 "Airlux" (1946–57)
Telechron 7H257 "Dimension" (1954–59)
History
As noted above, Henry Warren initially named his company "The Warren Clock Company." It became "Warren Telechron" in 1926. As early as 1917, General Electric acquired a strong interest in Telechron, realizing the economic potential of Warren's invention. When Warren retired in 1943, General Electric gradually absorbed Telechron into its operations. The clocks labeled "Telechron" on the dial, as well as those labeled "General Electric" (or both "General Electric" and "Telechron" on the dials) were both made in the Ashland, Massachusetts factory. GE clocks had their own case, dial and hand designs, as well as model names and numbers, but the internal workings of both brands of clock were always the same Telechron type of movement.
A Revere Clock with Westminster Chime (1940)
In addition to its association with GE, Telechron cooperated closely with one of America's most famous makers of traditional clocks, the Herschede company. Walter Herschede became interested in synchronous clocks in the 1920s, but did not want to risk the good name of his company by associating it too quickly with the new technology. Thus, he founded the Revere Clock Company as a division of Herschede that would market clocks driven by Telechron motors. These motors, however, were housed in the elegant cases of mantel and grandfather clocks for which Herschede was known; moreover, these clocks were equipped with chimes.
Telechron—now the "Clock and Timer Division" of GE—declined in the 1950s, mainly because batteries had become much more long-lived and reliable. Battery-powered clocks have the obvious advantage of not depending on the proximity of a power outlet, and do not require the often somewhat unattractive electric cable. Furthermore, the accuracy of the quartz clock superseded the principles of the synchronous motor. GE tried to respond to the declining market for Warren's technology by producing cheaper, less solidly manufactured clocks. Thus, plastic replaced bakelite or wood as the material for the cases; glass crystals were phased out in favor of plastic ones; and the much less durable S rotor took the place of the H rotor. Nevertheless, the decline of the synchronous clock could not be stopped. GE sold the last of its former Telechron plants in 1979. After successive attempts to revive the business remained fruitless, it closed permanently in 1992.
Nonetheless, even if Telechron's original operations have ceased, Telechron continues to exist as a brand: "Telechron" is the name used by a manufacturer of electric timers in Leland, North Carolina.[5] Moreover, a company that spun off from one of Telechron's research labs in 1928 is still flourishing: Electric Time Company manufactures custom tower and post clocks in Medfield, Massachusetts. Electric Time is the only such company in the U.S. that still makes its own clock movements.
Limitations of the Telechron Technology
Indicating Device on Telechron 2H07-Br
From a commercial point of view, it was the increased durability of batteries as well as the invention of the quartz movement that proved fatal to Telechron. From the point of view of the history of technology, however, another problem is more crucial: if the electric power grid is used as a system for the "distribution of time," as Warren himself wrote,[6] then, in the case of a power failure, the clocks stop, and the individual consumers' Telechrons lose their connection with the master clock (and, by implication, with the time provided by the Naval Observatory). If there is a temporary power outage while the owner is out, the running clock will display the incorrect time when he returns. Warren, foreseeing this difficulty, provided his clocks with an "indicating device":[6] a red dot that would appear on the dial whenever the power failed. This red dot alerted the consumer to the need to reset the clock (by obtaining the accurate time through the telephone, for example, or from a radio). Setting the clock would reset the indicator. The electric clock market grew rapidly in the 1930s, and Telechron's patented power interruption indicator gave his clocks an advantage over competing synchronous clocks, but by the 1950s battery-operated clocks that weren't dependent on the power grid took market share, and in the 1960s the quartz clock replaced synchronous clocks.
In recent years the problem of how to keep clocks synchronized with primary standards has been solved with the radio clock, which receives time signals not through the electric grid, but from government time radio stations.
Collecting Telechron Clocks
There is a growing community of hobbyists who collect Telechron clocks. An antique Telechron clock will usually come to life immediately (though sometimes noisily) when it is plugged in.[citation needed] Telechron motors are easily quieted and revived by carefully drilling 2 small holes that just puncture the surface, one on the large section, and one on the small section. A very light oil is injected, and then the small holes are carefully soldered shut. If a heavy oil is used, the clock may fail to keep accurate time until the motor becomes warm.
Telechron Alarm Clocks
Telechron electric alarm clock
Telechron alarm clocks are particularly popular with collectors. Until about 1940, the overwhelming majority of Telechron alarm clocks had bell alarms. The entire mechanism was enclosed in a bell housing of steel. Atop the clock's coil was a metal strip that vibrated at 60 cycles per second when the alarm was tripped. This strip had a V-shaped arm attached to it, ending in a striker, which vibrated in turn against the bell housing. With the approach of war, restrictions on various metals required a reduction in their use, and the bell housing was eliminated, with only the metal strip above the coil remaining. This in itself, however, provided a loud buzz when the alarm was tripped (and was the basis of the alarm in all brands of alarm clocks for many years after the war). Post-war, very few Telechrons had bell alarms, and the bell had disappeared completely by 1960. Telechron was one of the first companies to introduce what became known as the "snooze" alarm in the early 1950s.
Notes
↑ Patent Number: 1283433, Filing Date: Feb. 5, 1917, Issue Date: Oct. 1918, Inventor: Henry E. Warren, Assignee: Warren Clock Company (Self-Starting Synchronous Motor).
↑ For further details on the technology of the Warren Master Clock, see Harry S. Holcomb, III, and Robert Webb, "The Warren Telechron Master Clock Type A,"NAWCC Bulletin vol. 27:1, no. 234 (February 1985): 35–37.
↑ Jim Linz, Electrifying Time: Telechron & G.E. Clocks, 1925–1955 (Atglen, Pa.: Schiffer, 2001), p. 14.
↑ The rotor types are identified on the clocks with the letters B, F, H, and S. B indicates the earliest and S the last (and least reliable) generation of Telechron rotors.
1 2 See Henry E. Warren, "Modern Electric Clocks: A Paper Read at the Meeting of the Clock Club held at the Old State House, Boston, on February 6, 1937," reproduced in Journal of the Electrical Horology Society vol. 3, no. 3 (June 1978): 2–9.
Telechron.net is the most comprehensive Telechron site, with hundreds of pictures, historical information, and descriptions of almost every clock, as well as a forum for Telechron aficionados.
The Warren Conference Center, owned by Framingham State University and located in Ashland, Mass., was donated by Henry Warren and his wife Edith. Framingham State University acquired the center from Northeastern University in April 2016.
The Electric Time Company, Inc, Medfield, Mass., an outgrowth from Telechron, manufactures tower and street clocks.
A clock or chronometer is a device that measures and displays time. The clock is one of the oldest human inventions, meeting the need to measure intervals of time shorter than the natural units such as the day, the lunar month, and the year. Devices operating on several physical processes have been used over the millennia.
An electric motor is an electrical machine that converts electrical energy into mechanical energy. Most electric motors operate through the interaction between the motor's magnetic field and electric current in a wire winding to generate force in the form of torque applied on the motor's shaft. An electric generator is mechanically identical to an electric motor, but operates in reverse, converting mechanical energy into electrical energy.
Ashland is a town in Middlesex County, Massachusetts, United States. It is part of the MetroWest region. The population was 18,832 at the 2020 United States census.
An alternator is an electrical generator that converts mechanical energy to electrical energy in the form of alternating current. For reasons of cost and simplicity, most alternators use a rotating magnetic field with a stationary armature. Occasionally, a linear alternator or a rotating armature with a stationary magnetic field is used. In principle, any AC electrical generator can be called an alternator, but usually the term refers to small rotating machines driven by automotive and other internal combustion engines.
An induction motor or asynchronous motor is an AC electric motor in which the electric current in the rotor that produces torque is obtained by electromagnetic induction from the magnetic field of the stator winding. An induction motor therefore needs no electrical connections to the rotor. An induction motor's rotor can be either wound type or squirrel-cage type.
A synchronous electric motor is an AC electric motor in which, at steady state, the rotation of the shaft is synchronized with the frequency of the supply current; the rotation period is exactly equal to an integer number of AC cycles. Synchronous motors use electromagnets as the stator of the motor which create a magnetic field that rotates in time with the oscillations of the current. The rotor with permanent magnets or electromagnets turns in step with the stator field at the same rate and as a result, provides the second synchronized rotating magnet field. A synchronous motor is termed doubly fed if it is supplied with independently excited multiphase AC electromagnets on both the rotor and stator.
The utility frequency, (power) line frequency or mains frequency is the nominal frequency of the oscillations of alternating current (AC) in a wide area synchronous grid transmitted from a power station to the end-user. In large parts of the world this is 50 Hz, although in the Americas and parts of Asia it is typically 60 Hz. Current usage by country or region is given in the list of mains electricity by country.
A timer or countdown timer is a type of clock that starts from a specified time duration and stops when reaching 00:00. A simple timer is an hourglass. Commonly, a timer triggers an alarm when it ends. A timer can be implemented through hardware or software. Stopwatches operate in the opposite direction, upwards from 00:00, measuring elapsed time since a given time instant. Time switches are timers that control an electric switch.
The shaded-pole motor is the original type of AC single-phase motor, dating back to at least as early as 1890. A shaded-pole motor is a small motor with either two or four poles, in which the auxiliary winding is composed of a copper ring or bar surrounding a portion of each pole to produce a weakly rotating magnetic field. When single phase AC supply is applied to the stator winding, due to shading provided to the poles, a rotating magnetic field is generated. This auxiliary single-turn winding is called a shading coil. Currents induced in this coil by the magnetic field create a second electrical phase by delaying the phase of magnetic flux change for that pole enough to provide a 2-phase rotating magnetic field. The direction of rotation is from the unshaded side to the shaded (ring) side of the pole. Since the phase angle between the shaded and unshaded sections is small, shaded-pole motors produce only a small starting torque relative to torque at full speed. Shaded-pole motors of the asymmetrical type shown are only reversible by disassembly and flipping over the stator, though some similar looking motors have small, switch-shortable auxiliary windings of thin wire instead of thick copper bars and can reverse electrically. Another method of electrical reversing involves four coils.
A digital clock displays the time digitally, as opposed to an analogue clock.
An AC motor is an electric motor driven by an alternating current (AC). The AC motor commonly consists of two basic parts, an outside stator having coils supplied with alternating current to produce a rotating magnetic field, and an inside rotor attached to the output shaft producing a second rotating magnetic field. The rotor magnetic field may be produced by permanent magnets, reluctance saliency, or DC or AC electrical windings.
An electric clock is a clock that is powered by electricity, as opposed to a mechanical clock which is powered by a hanging weight or a mainspring. The term is often applied to the electrically powered mechanical clocks that were used before quartz clocks were introduced in the 1980s. The first experimental electric clocks were constructed around the 1840s, but they were not widely manufactured until mains electric power became available in the 1890s. In the 1930s, the synchronous electric clock replaced mechanical clocks as the most widely used type of clock.
An induction generator or asynchronous generator is a type of alternating current (AC) electrical generator that uses the principles of induction motors to produce electric power. Induction generators operate by mechanically turning their rotors faster than synchronous speed. A regular AC induction motor usually can be used as a generator, without any internal modifications. Because they can recover energy with relatively simple controls, induction generators are useful in applications such as mini hydro power plants, wind turbines, or in reducing high-pressure gas streams to lower pressure.
The Hammond Clock Company of Chicago (Illinois) produced electric clocks between 1928 and 1941. It was one of the ventures of Laurens Hammond, the inventor of the famous Hammond organ.
Electric Time Company, founded in 1928, is a manufacturer of tower and street clocks marketed worldwide.
The Self Winding Clock Company (SWCC) was a major manufacturer of electromechanical clocks from 1886 until about 1970. Based in New York City, the company was one of the first to power its clocks with an electric motor instead of winding by hand.
The Lavet-type stepping motor has widespread use as a drive in electro-mechanical clocks and is a special kind of single-phase stepping motor. Both analog and stepped-movement quartz clocks use the Lavet-type stepping motor. Through miniaturization, it can be used in wristwatches and requires very little power, making a battery last for many years. The French engineer Marius Lavet invented this kind of drive and described it in 1936 in his patent application FR823395.
A magneto is an electrical generator that uses permanent magnets to produce periodic pulses of alternating current. Unlike a dynamo, a magneto does not contain a commutator to produce direct current. It is categorized as a form of alternator, although it is usually considered distinct from most other alternators, which use field coils rather than permanent magnets.
Henry Ellis Warren was an American inventor credited with invention of the first synchronous electric clock which kept time from the oscillations of the power grid in 1918 as well as with 134 other inventions. Warren founded Warren Telechron Company in 1912 which later was acquired by General Electric in 1943. Warren was noted as the "father of electric time". Telechron went out of business in 1992. Just between 1916 and 1926 the company sold 20 million clocks. The clocks remained popular into the 1950s. In 1940 he also invented the "singing clock" which instead of a pendulum had a vibrating metal string.
Arthur William Haydon was an American inventor and industrialist known for his work in the field of microminiature electrical timing and governing devices for industrial and military use, some of which were used in early computing devices.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
