To Phoenix | |
---|---|
![]() | |
The To Phoenix in flight, 28 March 1982 | |
Role | Human-powered aircraft |
National origin | United Kingdom |
Manufacturer | Fred To |
First flight | 1981 |
Number built | 1 |
The Phoenix was a human-powered aircraft, designed and built in the 1980s by the British architect Frederick To. It was notable for being an inflatable tailless design and for its low airspeed. [1] [2]
Taking inspiration from Daniel Perkins' work with the Reluctant Phoenix , Fred To wished to resolve issues with storage and crashibility that previous human-powered aircraft had suffered from. To this end, the Phoenix was designed to have a simple layout, be easily stored, and be robust enough to survive accidents without damage. [1]
The Phoenix was a flying-wing configuration, with a rectangular wing planform. A reflex aerofoil, based on a Wortmann 15% aerofoil, but increased to 20% thickness was used. An aspect ratio of 6 was selected as that was considered to be the practical limit for pitch stability for such a design. The wing was built up using polyester film, and was constructed using a series of conjoined tubes running the full span of the wing. The wing was also skinned using polyester film, with a series of curved riblets applied at intervals across the span helping to maintain the desired aerofoil cross-section. When fully deflated, the wing could be folded down and stowed onto a car's roofrack. [1]
Downturned winglets at each wingtip provided directional control. The fuselage was constructed from carbon-fibre tubing, with the pilot seated in an upright cycling position and powering the tractor propeller via a chain drive. Control was by elevons and rudders in the winglets. These were operated by RC servoes controlled by the pilot. [3] [4]
Initial flight tests were conducted in August 1981 at sportgrounds in Chiswick, West London, when a series of three towed flights took place. During the last of these flights, the aircraft crashed from a height of 25 ft (7.6 m), without any damaged being incurred. The first human-powered flight took place on 28 March 1982, at the London Docklands, with Ian Parker acting as pilot. Further flights were made that day, all of about 20 seconds duration. It was noted that the Phoenix took a long time to reach flight speed, which To determined was due to the air mass contained within the inflatable wing being some 200 lb (91 kg). [1] [5]
Contemporary articles mentioned that To was designing a smaller, hybrid-powered inflatable HPA, with it weighing 60 lb (27 kg) spanning 50 ft (15 m) and flying at 15 mph (24 km/h). [2] [6]
Data from Jane's All the World's Aircraft 1982-83 [6]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
Related lists
The Schempp-Hirth Ventus is a sailplane produced during 1980–1994 by Schempp-Hirth, a German sailplane manufacturer. It was designed by Klaus Holighaus and replaced the Schempp-Hirth Mini-Nimbus. Schempp-Hirth manufactured 613 Ventus sailplanes.
The ASW 20 is an FAI 15 metre Class glider designed by Gerhard Waibel and built by Alexander Schleicher GmbH & Co. Its fuselage is nearly identical to that of the ASW 19, mated to newly designed flapped wings for the 15 metre Class. The prototype first flew in 1977. It proved to be a highly successful glider, winning several World Championships, and was still being flown at this level up to 1995. Developments along its production life included winglets, pneumatic turbulators, and wingtip extensions. It remained in production until 1990, when it was superseded by the ASW 27. 765 were built by Schleicher and a further 140 were made under license by Centrair in France.
The ASW 24 is a modern single-seat high-performance composite Standard Class sailplane. It is manufactured in Germany by Alexander Schleicher GmbH & Co.
The Cessna 414 is an American light, pressurized, twin-engine transport aircraft built by Cessna. It first flew in 1968 and an improved variant was introduced from 1978 as the 414A Chancellor.
The SZD-45 Ogar (Hound) is a T-tailed cantilever high-wing monoplane of wooden, aluminium and fibreglass construction designed and manufactured in Poland.
The Embraer EMB 202 Ipanema is a Brazilian agricultural aircraft used for aerial application, particularly crop dusting. It is produced by Indústria Aeronáutica Neiva, a subsidiary of Embraer located in Botucatu, Brazil. The latest version of this aircraft is the first ethanol-powered fixed-wing aircraft, which could give it an economical advantage over the gasoline version. The aircraft is widely employed in Brazil, having market share of about 80%, and the 1,000th delivery was completed on 15 March 2005. Besides aircraft, alcohol-conversion kits for gasoline-powered Ipanemas are also sold.
The UltraFlight Lazair is a family of Canadian designed and built twin-engine ultralight aircraft that were sold in kit form between 1979 and 1984.
The Stemme S10 is a self-launching sailplane produced by Stemme AG in Strausberg (Germany) since the 1980s. The engine is mounted amidships and it features an unusual folding propeller which is stowed inside the aircraft's nose-cone when the engine is not in use.
The Akaflieg Berlin B12 is a high performance two-place glider aircraft that was designed and built in Germany. Conceived as a research vehicle, only one unit was constructed.
Akaflieg Darmstadt is one of approximately twenty aviation groups attached to German universities. Akaflieg is an abbreviation for Akademische Fliegergruppe, an academic group of students and faculty from a German University.
The Alpaero Choucas is a French two seat, single engine tailless kit-built ultralight motor glider. At least 12 are flying, with more under construction.
The Akaflieg Darmstadt D-40 is an experimental variable geometry single seat sailplane, fitted with almost full span, camber changing flaps for optimum aerodynamics in weak thermals and integrated into the wing so as to minimise flap tip drag. One flew successfully but the D-40, like other variable geometry sailplanes, was not commercialised.
The Farner HF Colibri 1 SL was an unusual canard motor glider with a unique control system, designed and built in Switzerland in the late 1970s. Only one was constructed; much modified during the 1980s, it was still flying in 1990.
The RFB X-113 Aerofoil Boat was an experimental ground effect vehicle intended to work over water. It was one of three such aircraft designed by Alexander Lippisch in the 1960s and early 1970s. The X-113 first flew in 1970; only one was built.
The Collins X-112 was an experimental two-seat ground-effect vehicle, designed by Alexander Lippisch in the United States in the early 1960s to test his thick reverse delta wing concept.
The EuroSport Crossover is an electrically powered two seat motor glider and ultralight aircraft designed and built in Portugal.
The Wright MPA Mk 1 was the first of two human-powered aircraft designed and built by Peter Wright, an engineer from Melton Mowbray, England.
The HVS was a human-powered aircraft, designed and built by three German aeronautical professionals. Its name comes from the surnames of those involved; Wolfang Hütter, Franz Villinger, and Wilhelm Schüle. Villinger co-designed the 1930s HV-1 Mufli human-powered aircraft.
The Olympian ZB-1 was the first human-powered aircraft to have flown in the United States. It was designed, built, and flown by Joseph A. Zinno, of North Providence, Rhode Island. Zinno had previously been a USAF Lieutenant Colonel, and undertook the challenge of making a human-powered aircraft as a post-retirement project.
The Reluctant Phoenix is a British human-powered aircraft, designed and built in the 1960s by the British engineer Daniel Perkins. It was notable for being an inflatable delta-wing tailless design, and for being flown indoors.