Trapping mechanisms for carbon geosequestration

Last updated

Trapping mechanisms for carbon geosequestration prevent carbon dioxide stored in geological structures from leaking into the atmosphere. As a means to lower greenhouse gas emissions, carbon dioxide from carbon sequestration, especially in terms of carbon capture and storage, is able to be directed from power plants and other sources of greenhouse gas emissions, with carbon dioxide emissions being pumped into subterranean storage facilities. However, there is still the risk of the carbon dioxide leaking from the underground storage facilities. To address this, several trapping mechanisms have been proposed and researched. [1]

Contents

Structural trapping

This is most likely the main solution for preventing leaks. Impermeable (or low permeability) rocks such as caprock or similar material blocks the gas flow. Mudrocks, anhydrite, halite, or tight carbonates are materials that can act as a barrier to the upward buoyant migration of carbon dioxide. [1] [2]

Residual/capillary trapping

Higher capillary forces to buoyant forces cause carbon dioxide to appear as pore-scale bubbles in the formation. This is the is a process through which micrometer scale carbon dioxide bubbles are immobilized by capillary forces within the complex pore structure of the storage rock. [2]

Dissolution trapping

Carbon dioxide dissolves into any water already present in the storage formation. As dissolution proceeds, the water phase density will increase, resulting in downward convective flow of the carbon dioxide saturated water. [3] [4]

Mineral trapping

Chemical reactions between carbon dioxide, water, ions dissolved in the water, and formation minerals can result in carbon dioxide being permanently stored as a solid mineral phase. Examples of rock where this can take place are mafic or ultramafic lithologies. [5] [2]

Related Research Articles

<span class="mw-page-title-main">Carbon dioxide</span> Chemical compound with formula CO₂

Carbon dioxide is a chemical compound with the chemical formula CO2. It is made up of molecules that each have one carbon atom covalently double bonded to two oxygen atoms. It is found in the gas state at room temperature, and as the source of available carbon in the carbon cycle, atmospheric CO2 is the primary carbon source for life on Earth. In the air, carbon dioxide is transparent to visible light but absorbs infrared radiation, acting as a greenhouse gas. Carbon dioxide is soluble in water and is found in groundwater, lakes, ice caps, and seawater. When carbon dioxide dissolves in water, it forms carbonate and mainly bicarbonate, which causes ocean acidification as atmospheric CO2 levels increase.

<span class="mw-page-title-main">Coal pollution mitigation</span>

Coal pollution mitigation, sometimes labeled as clean coal, is a series of systems and technologies that seek to mitigate health and environmental impact of burning coal for energy. Burning coal releases harmful substances, including mercury, lead, sulfur dioxide (SO2), nitrogen oxides (NOx), and carbon dioxide (CO2), contributing to air pollution, acid rain, and greenhouse gas emissions. Methods include flue-gas desulfurization, selective catalytic reduction, electrostatic precipitators, and fly ash reduction focusing on reducing the emissions of these harmful substances. These measures aim to reduce coal's impact on human health and the environment.

<span class="mw-page-title-main">Volcanic gas</span> Gases given off by active volcanoes

Volcanic gases are gases given off by active volcanoes. These include gases trapped in cavities (vesicles) in volcanic rocks, dissolved or dissociated gases in magma and lava, or gases emanating from lava, from volcanic craters or vents. Volcanic gases can also be emitted through groundwater heated by volcanic action.

<span class="mw-page-title-main">Carbon capture and storage</span> Collecting carbon dioxide from industrial emissions

Carbon capture and storage (CCS) is a process in which a relatively pure stream of carbon dioxide (CO2) from industrial sources is separated, treated and transported to a long-term storage location. For example, the burning of fossil fuels or biomass results in a stream of CO2 that could be captured and stored by CCS. Usually the CO2 is captured from large point sources, such as a chemical plant or a bioenergy plant, and then stored in a suitable geological formation. The aim is to reduce greenhouse gas emissions and thus mitigate climate change. For example, CCS retrofits for existing power plants can be one of the ways to limit emissions from the electricity sector and meet the Paris Agreement goals.

Enhanced oil recovery, also called tertiary recovery, is the extraction of crude oil from an oil field that cannot be extracted otherwise. Although the primary and secondary recovery techniques rely on the pressure differential between the surface and the underground well, enhanced oil recovery functions by altering the chemical composition of the oil itself in order to make it easier to extract. EOR can extract 30% to 60% or more of a reservoir's oil, compared to 20% to 40% using primary and secondary recovery. According to the US Department of Energy, carbon dioxide and water are injected along with one of three EOR techniques: thermal injection, gas injection, and chemical injection. More advanced, speculative EOR techniques are sometimes called quaternary recovery.

<span class="mw-page-title-main">Carbon sequestration</span> Storing carbon in a carbon pool (natural as well as enhanced or artificial processes)

Carbon sequestration is the process of storing carbon in a carbon pool. It plays a crucial role in mitigating climate change by reducing the amount of carbon dioxide in the atmosphere. There are two main types of carbon sequestration: biologic and geologic. Biologic carbon sequestration is a naturally occurring process as part of the carbon cycle. Humans can enhance it through deliberate actions and use of technology. Carbon dioxide is naturally captured from the atmosphere through biological, chemical, and physical processes. These processes can be accelerated for example through changes in land use and agricultural practices, called carbon farming. Artificial processes have also been devised to produce similar effects. This approach is called carbon capture and storage. It involves using technology to capture and sequester (store) CO
2
that is produced from human activities underground or under the sea bed.

Carbon dioxide (CO2) flooding is a process in which carbon dioxide is injected into an oil reservoir to increase the output when extracting oil. This is most often used in reservoirs where production rates have declined due to depletion.

<span class="mw-page-title-main">Carbon dioxide scrubber</span> Device which absorbs carbon dioxide from circulated gas

A carbon dioxide scrubber is a piece of equipment that absorbs carbon dioxide (CO2). It is used to treat exhaust gases from industrial plants or from exhaled air in life support systems such as rebreathers or in spacecraft, submersible craft or airtight chambers. Carbon dioxide scrubbers are also used in controlled atmosphere (CA) storage. They have also been researched for carbon capture and storage as a means of combating climate change.

<span class="mw-page-title-main">Sleipner gas field</span> North Sea off Norway

The Sleipner gas field is a natural gas field in the block 15/9 of the North Sea, about 250 kilometres (160 mi) west of Stavanger, Norway. Two parts of the field are in production, Sleipner West, and Sleipner East (1981). The field produces natural gas and light oil condensates from sandstone structures about 2,500 metres (8,200 ft) below sea level. It is operated by Equinor. The field is named after the steed Sleipnir in Norse mythology.

Carbon capture and storage (CCS) is a technology that can capture carbon dioxide CO2 emissions produced from fossil fuels in electricity, industrial processes which prevents CO2 from entering the atmosphere. Carbon capture and storage is also used to sequester CO2 filtered out of natural gas from certain natural gas fields. While typically the CO2 has no value after being stored, Enhanced Oil Recovery uses CO2 to increase yield from declining oil fields.

<span class="mw-page-title-main">Carbon dioxide removal</span> Removal of atmospheric carbon dioxide through human activity

Carbon dioxide removal (CDR) is a process in which carbon dioxide is removed from the atmosphere by deliberate human activities and durably stored in geological, terrestrial, or ocean reservoirs, or in products. This process is also known as carbon removal, greenhouse gas removal or negative emissions. CDR is more and more often integrated into climate policy, as an element of climate change mitigation strategies. Achieving net zero emissions will require first and foremost deep and sustained cuts in emissions, and then—in addition—the use of CDR. In the future, CDR may be able to counterbalance emissions that are technically difficult to eliminate, such as some agricultural and industrial emissions.

Enhanced weathering, also termed ocean alkalinity enhancement when proposed for carbon credit systems, is a process that aims to accelerate the natural weathering by spreading finely ground silicate rock, such as basalt, onto surfaces which speeds up chemical reactions between rocks, water, and air. It also removes carbon dioxide from the atmosphere, permanently storing it in solid carbonate minerals or ocean alkalinity. The latter also slows ocean acidification.

The Weyburn-Midale Carbon Dioxide Project was, as of 2008, the world's largest carbon capture and storage project. It has since been overtaken in terms of carbon capture capacity by projects such as the Shute Creek project and the Century Plant. It is located in Midale, Saskatchewan, Canada.

Carbfix is an Icelandic company that has developed an approach to capturing and storing CO2 in water, and its injection into subsurface basalts. Once in the subsurface, the injected CO2 reacts with the host rock forming stable carbonate minerals, thus providing storage of the captured gas.

The Gorgon Carbon Dioxide Injection Project is part of the Gorgon Project, one of the world's largest natural gas projects. The Gorgon Project, located on Barrow Island in Western Australia, includes a liquefied natural gas (LNG) plant, a domestic gas plant, and a Carbon Dioxide Injection Project.

Direct deep-sea carbon dioxide injection was a (now abandoned) technology proposal with the aim to remove carbon dioxide from the atmosphere by direct injection into the deep ocean to store it there for centuries. At the ocean bottom, the pressures would be great enough for CO2 to be in its liquid phase. The idea behind ocean injection was to have stable, stationary pools of CO2 at the ocean floor. The ocean could potentially hold over a thousand billion tons of CO2. However, the interest in this avenue of carbon storage has much reduced since about 2001 because of concerns about the unknown impacts on marine life, high costs and concerns about its stability or permanence.

<span class="mw-page-title-main">Microbial electrolysis carbon capture</span>

Microbial electrolysis carbon capture (MECC) is a carbon capture technique using microbial electrolysis cells during wastewater treatment. MECC results in net negative carbon emission wastewater treatment by removal of carbon dioxide (CO2) during the treatment process in the form of calcite (CaCO3), and production of profitable H2 gas.

<span class="mw-page-title-main">Carbon capture and utilization</span>

Carbon capture and utilization (CCU) is the process of capturing carbon dioxide (CO2) from industrial processes and transporting it via pipelines to where one intends to use it in industrial processes.

<span class="mw-page-title-main">Direct air capture</span> Method of carbon capture from carbon dioxide in air

Direct air capture (DAC) is the use of chemical or physical processes to extract carbon dioxide directly from the ambient air. If the extracted CO2 is then sequestered in safe long-term storage, the overall process will achieve carbon dioxide removal and be a "negative emissions technology" (NET).

<span class="mw-page-title-main">Fault zone hydrogeology</span>

Fault zone hydrogeology is the study of how brittlely deformed rocks alter fluid flows in different lithological settings, such as clastic, igneous and carbonate rocks. Fluid movements, that can be quantified as permeability, can be facilitated or impeded due to the existence of a fault zone. This is because different mechanisms that deform rocks can alter porosity and permeability within a fault zone. Fluids involved in a fault system generally are groundwater and hydrocarbons.

References

  1. 1 2 CO2 wettability of seal and reservoir rocks and the implications for carbon geo‐sequestration - Iglauer - 2015 - Water Resources Research - Wiley Online Library
  2. 1 2 3 Ajayi, Temitope; Gomes, Jorge Salgado; Bera, Achinta (2019-10-01). "A review of CO2 storage in geological formations emphasizing modeling, monitoring and capacity estimation approaches". Petroleum Science. 16 (5): 1028–1063. doi:10.1007/s12182-019-0340-8. ISSN   1995-8226.
  3. Lindeberg, E. and Wessel-Berg, D. (1997) Vertical Convection in an Aquifer Column under a Gas Cap of CO2. Energy Conversion and Management, 38, S229-S234. - References - Scientific Research Publishing (scirp.org)
  4. Permanent carbon dioxide storage in deep-sea sediments (pnas.org)
  5. Snæbjörnsdóttir, Sandra Ó; Sigfússon, Bergur; Marieni, Chiara; Goldberg, David; Gislason, Sigurður R.; Oelkers, Eric H. (2020). "Carbon dioxide storage through mineral carbonation". Nature Reviews Earth & Environment . 1 (2): 90–102. doi:10.1038/s43017-019-0011-8. ISSN   2662-138X.