Triumph Twenty One

Last updated

Triumph Twenty One
1958 Triumph Twenty One 01.jpg
Manufacturer Triumph Engineering Co Ltd
Also calledT21, Twenty One, 'Bathtub'
Production1957–1966
Class Standard
Engine 349 cc (21.3 cu in), air-cooled, four-stroke, twin
Transmission Four-speed, chain final drive

The Triumph Twenty One (also known as the 3TA) is a standard motorcycle made by Triumph Engineering Co Ltd in Coventry. The Model Twenty One was the first of the Triumph unit construction twin cylinder motorcycles. Rebranded as the Triumph 3TA in 1959 it continued in production until 1966 when it was survived by the Triumph T90, its sports version. [1]

Contents

Development

Launched in 1957 the Model Twenty One was the first of the Triumph unit construction twin cylinder motorcycles from the Meriden factory. With a capacity of 349 cc, the engine was a classic Edward Turner design with a 360 degree crankshaft, twin gear driven camshafts and twin plunger oil pump. The cylinder block was cast iron with an alloy head and separate rocker boxes. The engine was dry sump lubrication and there was a single Amal Monobloc carburettor. Drive was by a conventional four speed gearbox, with a right foot gear lever. [2]

Triumph 'Twenty One' with the abbreviated 'bikini' version of the 'bathtub' rear fairing Triumph Twenty One - Flickr - mick - Lumix(1).jpg
Triumph 'Twenty One' with the abbreviated 'bikini' version of the 'bathtub' rear fairing

There are two explanations for the 'Twenty One' name spelt out in full on the side panels. The first explanation is that it celebrates the twenty-first anniversary of Triumph Engineering Co Ltd. The second explanation is that the important US export market rated motorcycle engine displacement in cubic inches and 21 cubic inches equates to 350 cc. [3]

One of the last versions: a 1966 Dutch Army Triumph 3TA 'Twenty One', now on display at the Marshallmuseum, Overloon. Triumph motorcycle at Overloon.JPG
One of the last versions: a 1966 Dutch Army Triumph 3TA 'Twenty One', now on display at the Marshallmuseum, Overloon.
1965 350cc Triumph T90 Tiger. Built from 1962-68, this was the sports version of the Triumph Twenty One Triumph Tiger 90.jpg
1965 350cc Triumph T90 Tiger. Built from 1962-68, this was the sports version of the Triumph Twenty One

In 1959 the Twenty One was rebranded the Triumph 3TA and also produced as a 500 cc version, the Triumph 5TA, which was also referred to as the 'new Speed Twin'. The 'A' designation was a reference to the fact that both motorcycles were fitted with an alternator as standard, as the pre-unit models had been fitted with a Dynamo. The original versions of both the 350 cc and 500 cc models had the fully enclosed rear end which was fashionable in the late 1950s. [3] It was not popular with American customers, where the extra weather protection was less important however, and it got called the 'bathtub'. They also found that the extra sheet metal made access for servicing more complicated. [4] Only the final 3TA model for 1966 dispensed entirely with the rear fairing.

After a single season, the 1964 350cc Triumph T90 Tiger dispensed with the unpopular 'semi-bathtub' or 'bikini' rear fairing still to be found upon the 3TA. Triumph Tiger 90 i.jpg
After a single season, the 1964 350cc Triumph T90 Tiger dispensed with the unpopular 'semi-bathtub' or 'bikini' rear fairing still to be found upon the 3TA.

The 3TA and the 5TA both continued in production until 1966 when they were survived by their sportier versions, the T90 and T100 respectively. [1]

See also

Related Research Articles

Indian Motocycle Manufacturing Company motorcycle manufacturer

Indian Motorcycle is an American brand of motorcycles originally produced from 1901 to 1953 in Springfield, Massachusetts, United States. Hendee Manufacturing Company initially produced the motorcycles, but the name was changed to the Indian Motocycle Manufacturing Company in 1923.

Triumph Engineering Co Ltd was a British motorcycle manufacturing company, based originally in Coventry and then in Meriden. A new company, Triumph Motorcycles Ltd, based in Hinckley, gained the name rights after the end of the company in the 1980s and is now one of the world's major motorcycle manufacturers.

Sharps Commercials Ltd was a British car maker based in Preston, Lancashire. It was founded in 1922 by Paul Sharp. It changed its name to Bond Cars Ltd in 1963. The company was taken over by the Reliant Motor Co Ltd of Tamworth, Staffordshire in February 1969, who eventually closed the Preston factory in August 1970, transferring the spare parts business for the Bond Minicar, 875 saloon, 875 Ranger van and Equipe models to a firm called Bob Joyner & Son in Oldbury in the English Midlands. Reliant nevertheless continued to use the Bond name until 1974 on Bond Bug models made at their own Tamworth plant.

The Scott Motorcycle Company was owned by Scott Motors (Saltaire) Limited, Shipley, West Yorkshire, England and was a well-known producer of motorcycles and light engines for industry. Founded by Alfred Angas Scott in 1908 as the Scott Engineering Company in Bradford, Yorkshire, Scott motorcycles were produced until 1978.

Phelon & Moore

Phelon & Moore manufactured motorcycles in Cleckheaton, Yorkshire, England from 1904 to 1967 particularly those under the Panther marque. They became identified with one particular design of motorcycle which had a large sloping 40-degree single-cylinder engine as a stressed member of the frame. This design spanned the entire history of the company, starting with a 500 cc model and ending with a 645 cc model.

Henderson was a manufacturer of 4-cylinder motorcycles from 1912 until 1931. They were the largest and fastest motorcycles of their time, and appealed to both sport riders and police departments. Police favored them for traffic patrol because they were faster than anything else on the roads. The company began during the golden age of motorcycling, and ended during the Great Depression.

BSA Rocket 3/Triumph Trident

The Triumph Trident and BSA Rocket 3 was a technically advanced, high-performance roadster motorcycle made by Triumph Engineering and BSA from 1968 to 1975, and sold under both the Triumph and BSA marques. Alongside the Honda CB750, and later the Kawasaki triples, it brought a new level of sophistication to street motorcycles, marking the beginning of the superbike era. The Honda CB750 overshadowed the Trident to be remembered as the 'first superbike', in spite of the Triumph Trident actually debuting before the Honda by a few weeks.

Triumph Bonneville

The Triumph Bonneville is a standard motorcycle featuring a parallel-twin four-stroke engine and manufactured in three generations over three separate production runs.

Triumph Tigress/BSA Sunbeam British scooter

The Triumph Tigress, also sold as the BSA Sunbeam, was a scooter designed to have good performance and handling for the motorcycle enthusiast. The entry of the BSA group into the scooter field was announced by Edward Turner in October 1958. The 250 cc model would have a cruising speed of 55 to 60 mph and petrol consumption of 120 miles per imperial gallon. A prototype 250 cc BSA Sunbeam was displayed at the 1958 Earl's Court Cycle and Motor Cycle Show. Manufacture started in late 1959, but delivery difficulties were acknowledged due to problems with recruiting labour, although it was claimed that the group had a manufacturing capacity of 50,000 machines a year.

Unit construction

Unit construction is the design of larger motorcycles where the engine and gearbox components share a single casing. This sometimes includes the design of automobile engines and was often loosely applied to motorcycles with rather different internal layouts such as the flat twin BMW models.

Edward Turner

Edward Turner was an English motorcycle designer. He was born in Camberwell in the London Borough of Southwark, on the day King Edward VII was proclaimed King. In 1915, Turner had his first ride on a motorcycle, a Light Tourist New Imperial.

Greeves (motorcycles)

Greeves Motorcycles was a British motorcycle manufacturer founded by Bert Greeves which produced a range of road machines, and later competition mounts for observed trials, scrambles and road racing. The original company produced motorcycles from 1952, funded by a contract with the Ministry of Pensions for their Invacar, a three-wheeler for disabled drivers.

Humber Limited was a pioneering British motorcycle manufacturer. Humber produced the first practical motorcycle made in Britain by fitting one of their Humber bicycles with an E. J. Pennington two-horsepower motor in 1896.

Triumph Speed Twin British motorcycle

The Speed Twin 5T is a motorcycle that was made by Triumph at their Coventry, and later Meriden factories. Edward Turner, Triumph’s Chief Designer and Managing Director, launched the Triumph Speed Twin at the 1937 National Motorcycle Show. It was a 500 cc OHV vertical twin in a lightweight frame and the first truly successful British parallel twin, setting the standard for many twins to follow. After World War II the Speed Twin was responsible for the survival of Triumph - and every major British marque offered a 500 cc twin designed on similar lines to the Speed Twin.

BSA A7

The BSA A7 was a 500cc motorcycle model range made by Birmingham Small Arms Company (BSA) at their factory in Armoury Road, Small Heath, Birmingham. The range was launched in 1946 using a 495 cc (30.2 cu in) long stroke engine. An improved 497 cc (30.3 cu in) version based on the BSA A10 engine was launched in 1950. The various A7 models continued in production with minor modifications until 1961/2 when they were superseded by the unit-construction A50 model.

Triumph Bonneville T140 Motorcycle

The Triumph Bonneville T140 is a standard motorcycle with a 750 cc (46 cu in) capacity engine that was designed and built by Triumph Engineering at Meriden near Coventry.

BSA C15 A British, 250 cc single cylinder motorcycle, produced by BSA in the 1960s.

The BSA C15 was a 250 cc single-cylinder ohv motorcycle manufactured by the British company BSA from September 1958 until 1967, and was BSA's first four-stroke unit-construction bike. For most of that period, after the introduction of 'Learner Laws' in 1961, a 250 cc was the largest capacity solo machine that a learner could ride unaccompanied when displaying L-plates in the United Kingdom. A road-going Sports derivative was added in 1961, and off-road versions, for Trials and Scrambles, were also available in the range.

Triumph Tiger T110 British motorcycle

The Triumph Tiger 110 is a British sports motorcycle that Triumph first made at their Coventry factory between 1953 and 1961. The T110 was developed from the Triumph Thunderbird and first appeared in 1954.

BSA motorcycles

BSA motorcycles were made by the Birmingham Small Arms Company Limited (BSA), which was a major British industrial combine, a group of businesses manufacturing military and sporting firearms; bicycles; motorcycles; cars; buses and bodies; steel; iron castings; hand, power, and machine tools; coal cleaning and handling plants; sintered metals; and hard chrome process.

Bridgestone (motorcycle) Brand of motorcycles produced by the Japanese tire manufacturer between 1952 and 1970

Bridgestone motorcycles were a division of the Bridgestone Tire Co. of Kyōbashi, Tokyo, Japan that produced mopeds and motorcycles from 1952 to 1970. Initially producing power assisted bicycles, the division moved on to producing mopeds and then motorcycles. The motorcycles were technologically advanced and powered by two-stroke engines. The high technical specification resulted in the machines being more expensive compared to other manufacturers models. Production was stopped in 1970 to protect the supply of tyres to other manufacturers.

References

  1. 1 2 "Triumph 3TA" . Retrieved 14 April 2009.
  2. Bacon, Roy (1988). British Motorcycles of the 60's. Osprey Publishing. ISBN   978-1-85648-166-3.
  3. 1 2 "A Brief History of Triumph 'C' Range Motorcycles" . Retrieved 1 April 2009.
  4. Remus, Tim (1997). Triumph Motorcycles: Twins and Triples. MBI Publishing Company. ISBN   978-0-7603-0312-2.