Triumph TR65 Thunderbird

Last updated

TR65 Thunderbird/Daytona 600
MoD TR65.jpg
Manufacturer Triumph
Production1981–1983
Engine 649 cc (39.6 cu in) OHV air-cooled twin
Power 42 bhp (31 kW) at 6,500 rpm[ citation needed ]
Torque 37 lb⋅ft (50 N⋅m) @ 5,500 rpm[ citation needed ]
Transmission 5-speed manual, chain final drive
Weight395 lb (179 kg)[ citation needed ] (dry)
Fuel capacity10.5 L (2.3 imp gal; 2.8 US gal)

The Triumph TR65 Thunderbird is a motorcycle made by the Triumph worker's co-operative at the Meriden factory from 1981 to 1983. The TR65 was a reintroduction of the Triumph Thunderbird model name first used on the original 6T Thunderbird of 1949. [1] A short stroke model, the Daytona 600 was designed in 1983 but not produced.

Contents

Development

Tr65 4.jpg

The TR65 was a 650 cc parallel twin with a short-stroke version of the 750 cc T140 Bonneville engine. This made the engine livelier with a better throttle response and with maximum torque produced at higher engine speeds. The TR65 also has a single 30 mm Amal carburettor and a mild cam.

Aimed at the economy market, it was cheaper to insure than the T140 and could return 54 mpgimp (5.2 L/100 km; 45 mpgUS). Costs were reduced by having a single silencer, using mechanical contact breaker points instead of electronic ignition and using a drum rear brake instead of the more expensive disc brake. Instead of a tachometer, the warning lights and ignition switch were housed in the right hand pod of the instrument binnacle. Cycle parts, including the Girling rear suspension units, were painted in satin black rather than being chromed or polished and the exhaust system was black chromed to match. Dunlop Gold Seal economy tyres were fitted instead of the more expensive Avon Roadrunners specified for the 750cc roadster range. Triumph however included newly introduced European components such as German ULO direction indicators and Italian Radaelli wheel rims and Paioli petrol taps. The original 'paper dart' Thunderbird logo designed by Edward Turner for the first Thunderbirds in 1949 was retained on the side panel badge as a reminder of the model's lineage. Triumph described the TR65 in their publicity poster as combining Performance With Economy.

Although produced in a USA variant with a 2-gallon tank and high handlebars as compared to the 4 gallon tank, with low handlebars for the UK and the rest of the world, no TR65 was ever exported to the United States because, as with the 750 cc TR7V Tiger, from mid-1978 on, the fitted Amal Mk 1 carburettor offended that country's Environmental Protection Agency's regulations. The TR65 was exported to Japan, South Africa, Western Europe and to British Commonwealth countries including Australia, Cyprus , Canada and New Zealand, albeit to the latter three in small numbers.

A TR65S Thunderbird model was one factory-fitted with the electronic ignition and electric starter options. A TR65S fitted with after-market Hedingham leading link front forks carried London residents Richard and Mopsa English and a Squire sidecar around the world from 1982 to 1986. [2] The journey is detailed in their book, Full Circle, and the TR65S combination used has been on display at the London Motorcycle Museum since 2010 having initially been housed at the National Motorcycle Museum upon the English's return.

Models

1981 UK specification Triumph TR65 Thunderbird at the National Motorcycle Museum (UK) showing black engine finish and siamesed exhaust system. Triumph Thunderbird TR65 1982.JPG
1981 UK specification Triumph TR65 Thunderbird at the National Motorcycle Museum (UK) showing black engine finish and siamesed exhaust system.

All UK/RoW TR65 models were to come with the newly designed, Italian-sourced, 4 gallon fuel tank (pictured) but in his 2009 book 'Save the Triumph Bonneville!' former Triumph chairman, John Rosamond, details shortages of this part meant that the older 4 gallon 'breadbin'-style tank was initially used. [3]

A trail version with electronic ignition, the TR65T Tiger Trail, was also introduced in 1981 but together with the earlier 750 cc version was dropped from the range due to poor sales in late 1982, perhaps understandable given that it was priced the same as the 750 cc version. [4] [5]

According to Triumph's 1982/3 range brochure the cycle parts of that season's 'USA' styled Thunderbird dispensed with the satin black finish, instead adopting bright chrome, polished alloy, a tachometer, twin bright-chromed exhausts and Marzocchi rear suspension units which came with black springs as standard. The UK version added the twin exhausts, Marzocchis suspension and a tachometer but retained the satin black cycle parts of the 1981/2 models. Whilst both versions retained their contact breaker points ignition, they were now, like the 750 cc models, shod with Avon Roadrunner tyres. There were price differentials for 1982 USA and UK/RoW styles.

Ten TR65 were specially ordered from Meriden and modified as Dernys for bicycle speed trials work/pace bikes at the Leicester Velodrome [3] although they were since located at London's Herne Hill facility. [6]

Planned for 1984 and styled after the T140 TSX, a custom model and further sleeved-down TR60 600 cc Thunderbird was exhibited but not produced, [7] [8] the co-operative closing down towards the end of 1983. [3] The new 600cc engine's bore and stroke was 76mm x 66mm with a compression ratio of 8.5:1. Electric starting came as standard with no kick start fitted. These were aimed at the newly qualified rider for whom the cost of insuring Triumph's larger models was too expensive. [8]

The prototype Thunderbird 600 was converted by the factory into a conventional kick start TR65 to fulfil a Ministry of Defence order. From the Meriden Triumph factory production records held by the Vintage Motor Cycle Club this TR65 made on 1 June 1983 was the last 650 cc motorcycle and the second to last motorcycle made at Meriden before the factory's closure that August.

Triumph Daytona 600 cc prototype

1983 prototype 600 cc Daytona made by Triumph's Meriden factory at the London Motorcycle Museum 1983 Prototype Triumph Daytona 600.jpg
1983 prototype 600 cc Daytona made by Triumph's Meriden factory at the London Motorcycle Museum

A 600 cc Triumph Daytona 600 was manufactured in 1983 by Triumph Motorcycles in their Meriden factory. It was a short-stroke twin-carburettor version of the 650 cc TR65 Thunderbird with an 8.5:1 compression ratio, but it was exhibited at the 1983 motorcycle show at the National Exhibition Centre as a new model for their (eventually unrealised) 1984 range. Unique for that year's home market models, it featured rear-set foot rests and a plastic 'ducktail' rear end over the short chromed rear mudguard from the Triumph T140 TSX. Although sporting a front disc brake, it retained the drum rear brake of the TR65 Thunderbird. [9] [10]

With a claimed top speed of over 100 miles per hour, the target market was said by Meriden to be newly qualified riders for whom the cost of insurance made their 650cc and 750cc bikes prohibitively expensive. [10] Two prototypes were made, one show version with electric start, the other with a kick start for testing. The latter, the only one left after the Meriden factory finally closed in 1983, is on display at the London Motorcycle Museum. [11]

See also

Notes

  1. Bacon 1995, p. 104.
  2. Richard & Mopsa English Full Circle: Around The World on a Motorcycle & Sidecar ISBN   9780854296620 (Foulis/Haynes 1989)
  3. 1 2 3 Rosamond, John (2009), Save The Triumph Bonneville! The Inside Story of the Meriden Workers' Co-op, Veloce, ISBN   978-1-845842-65-9
  4. Bacon 1995, p. 106.
  5. Trails of the unexpected (The Biker), April 1982
  6. Danny Defazio Thunderbirds Are Still Go ! (Classic Bike 11/02)
  7. Guide Lines (Cycle Guide 6/83)
  8. 1 2 "Daytona Return!", Motor Cycle News , 3 February 1983
  9. Guide Lines(Cycle Guide 6/83)
  10. 1 2 Daytona Return ! Motor Cycle News (02.03.83)
  11. Rosamond, John Save The Triumph Bonneville ! The Inside Story of the Meriden Workers Co-Op (Veloce 2009)

Related Research Articles

Triumph Engineering Co Ltd was a British motorcycle manufacturing company, based originally in Coventry and then in Meriden. A new company, Triumph Motorcycles Ltd, based in Hinckley, gained the name rights after the end of the company in the 1980s and is now one of the world's major motorcycle manufacturers.

<span class="mw-page-title-main">Triumph Thunderbird</span> Type of motorcycle

The Triumph Thunderbird is a British motorcycle that was introduced by Triumph in 1949 and produced in many forms until 1966. The name was used three more times for new and distinct Triumph models.

<span class="mw-page-title-main">BSA Rocket 3/Triumph Trident</span> 1960s/1970s British motorcycle made by Triumph Engineering, Meriden

The Triumph Trident and BSA Rocket 3 was a technically advanced, high-performance roadster motorcycle made by Triumph Engineering and BSA from 1968 to 1975, and sold under both the Triumph and BSA marques. Alongside the Honda CB750, and later the Kawasaki triples, it brought a new level of sophistication to street motorcycles, marking the beginning of the superbike era. The Honda CB750 overshadowed the Trident to be remembered as the 'first superbike', in spite of the Triumph Trident actually debuting before the Honda by a few weeks.

<span class="mw-page-title-main">Triumph Bonneville</span> Type of motorcycle

The Triumph Bonneville is a standard motorcycle featuring a parallel-twin four-stroke engine and manufactured in three generations over three separate production runs.

<span class="mw-page-title-main">Triumph Trident</span> British motorcycle produced 1991–1998

The Triumph Trident is a three-cylinder motorcycle of either 750 cc or 900 cc capacity. These bikes were produced from 1991 to 1998 at Hinckley, Leicestershire, England, by Triumph Motorcycles Ltd, the successor business to the defunct Triumph Engineering at Meriden Works, Warwickshire, England.

<span class="mw-page-title-main">Triumph Daytona 600</span> Type of motorcycle

The Triumph Daytona 600 is a name given to two different motorcycles.

<span class="mw-page-title-main">Triumph T140W TSS</span> British motorcycle

The T140W TSS was the last motorcycle model made by Triumph Engineering at their Meriden factory.

<span class="mw-page-title-main">Triumph Thunderbird (2009)</span> British motorcycle

The 2009 and later Triumph Thunderbird is a series of large displacement straight-twin cruiser motorcycles, made by Triumph Motorcycles in Hinckley, England. Since 2016, the model is offered as a base 1.6 L (98 cu in) and as 1.7 L (104 cu in) 'Commander' and 'Storm' variants.

<span class="mw-page-title-main">Triumph Thruxton</span> British motorcycle

The Triumph Thruxton is a series of British motorcycles with parallel-twin engines and sports styling. The name Thruxton was first applied to a handbuilt machine for endurance racing in the mid 1960s, and later revived in the 2000s.

<span class="mw-page-title-main">Triumph T140 TSX</span> British motorcycle

The Triumph TSX was a British motorcycle credited by the factory as being designed in 1981–1982 by Wayne Moulton, president of Triumph Motorcycles America(TMA), the factory's American arm. This is the only instance of Triumph's signature twin cylinder models being designed by an American.

<span class="mw-page-title-main">Triumph Tiger Trail</span> British motorcycle

The Triumph Tiger Trail was a motorcycle model manufactured by Triumph Motorcycles at the Meriden factory. The Tiger Trail was made from 1981 to 1982 in both 750 cc (TR7T) and 650 cc (TR65T) capacities, and under 180 examples were built. Emission regulations precluded export to the USA but otherwise the model was available to all Triumph's other markets particularly in many British Commonwealth nations and western Europe.

<span class="mw-page-title-main">Triumph Bonneville T100</span> British motorcycle

The Bonneville T100 is a motorcycle designed and built by Triumph Motorcycles Ltd in Hinckley, Leicestershire, UK.

<span class="mw-page-title-main">Triumph Bonneville T120</span> British motorcycle

The Triumph Bonneville T120 is a motorcycle originally made by Triumph Engineering from 1959 to 1975. It was the first model of the Bonneville series, which was continued by Triumph Motorcycles Ltd. The T120 was discontinued in favour of the larger 750 cc T140 in the early 1970s.

Leslie Frederick Harris was an English businessman and motorcycle enthusiast who resurrected the Triumph Bonneville for a few years in the 1980s. Born in 1939, he was described as the "saviour of the British motorcycle industry". Invited to Buckingham Palace and the Houses of Parliament, in 1987 he was visited by the Prime Minister Margaret Thatcher. He died in February 2009, aged 69.

<span class="mw-page-title-main">Triumph Bonneville T140</span> Motorcycle

The Triumph Bonneville T140 is a standard motorcycle with a 750 cc (46 cu in) capacity engine that was designed and built by Triumph Engineering at Meriden near Coventry.

Brian Jones was a motorcycle designer and engineer born in Gloucester, United Kingdom in 1928. Notable for his contribution to the original design of the Triumph Bonneville, he died in Coventry, on 4 March 2001.

Wayne LaVar Moulton was a motorcycle designer called "the father of the Japanese cruiser" after introducing specific designs for importers to the lucrative US motorcycle market. The custom/cruiser market continually occupies one of the biggest slices of the important large displacement US motorcycle market.

<span class="mw-page-title-main">Norton Model 99 Dominator</span> Type of motorcycle

The Norton Model 99 Dominator was a 600 cc vertical twin motorcycle manufactured by the British Norton Motorcycle Company at their Bracebridge St, Birmingham factory from 1956 to 1962. The 99 was based on the 500 cc Model 88 Dominator with an enlarged engine. The model was superseded by the 650SS.

<span class="mw-page-title-main">Triumph Trophy (T300)</span> Type of motorcycle

The Triumph Trophy is a three or four-cylinder touring motorcycle of either 885 cc or 1,180 cc capacity. These bikes were produced from 1991 to 2003 at Hinckley, Leicestershire, England, by Triumph Motorcycles Ltd, the successor business to the defunct Triumph Engineering at Meriden Works, Warwickshire, England.

<span class="mw-page-title-main">Triumph Daytona (T300)</span> Type of motorcycle

The Triumph Daytona and Daytona Super 3 is a three or four-cylinder British sports motorcycle. These bikes were produced from 1991 to 1996 at Hinckley, Leicestershire, England, by Triumph Motorcycles Ltd, the successor business to the defunct Triumph Engineering at Meriden Works, Warwickshire, England.

References