UMaine Advanced Structures and Composites Center

Last updated

The organization's logo as of 2012 University of Maine Advanced Structures and Composites Center logo.svg
The organization's logo as of 2012

The Advanced Structures and Composites Center is an independent research unit at the University of Maine that provides research, education, and economic development encompassing material sciences, manufacturing and engineering of composites and structures.

Contents

The Alfond W Ocean Engineering Lab at the UMaine Composites Center is a unique facility equipped with a high-performance rotating wind machine over a wave basin. The facility can simulate 1000+ year return period wind and wave conditions, representing some of the worst storms possible anywhere on earth at 1:50 scale. Alfond W2 Ocean Engineering Lab at the UMaine Advanced Structures and Composites Center.jpg
The Alfond W Ocean Engineering Lab at the UMaine Composites Center is a unique facility equipped with a high-performance rotating wind machine over a wave basin. The facility can simulate 1000+ year return period wind and wave conditions, representing some of the worst storms possible anywhere on earth at 1:50 scale.

The center was founded in 1996 with support from the National Science Foundation by Dr. Habib Dagher, P.E. Annually, the center employs a staff of 180, inclusive of 140 undergraduate and graduate students from a range of academic backgrounds. [2]

The center is housed in a 100,000 square feet (9,300 square meters), ISO 17025 testing laboratory accredited by the International Accreditation Service. [3]

In 2014, the center was designated as a "Signature Research Area" of the University of Maine. [4]

The center has gained national and international recognition for major research and development projects such as the VolturnUS 1:8, the first grid-connected floating offshore wind turbine in the US and the first in the world made out of concrete and composite materials, the inflatable composite arch bridges "Bridge-in-a-Backpack" technology now approved in the American Association of State Highway and Transportation Officials Code, the first Modular Ballistic Protection System (MBPS) approved by the US Army to protect troops in tents from blast and ballistic threats, development of coated wood technology for blast and hurricane resistant wood buildings, and the longest carbon-fiber composite vessel built for the US Navy.

Dr. Habib Dagher, P.E.

Habib Joseph Dagher is the founding executive director of the UMaine Advanced Structures and Composites Center. Dr. Habib Joseph Dagher.jpg
Habib Joseph Dagher is the founding executive director of the UMaine Advanced Structures and Composites Center.

Habib Dagher is the founding Executive Director of the Advanced Structures & Composites Center at the University of Maine. Dr. Dagher is an advocate for developing advanced structural systems which simultaneously optimize structures, materials, and construction.

Dagher holds 25 U.S. and international patents with 8 additional patents pending, [5] and has received numerous awards including the 2015 White House Transportation Champion of Change, awarded for the development of composite arch bridge system technology; the Carnegie Foundation Maine Professor of the Year; the Distinguished Maine Professor Award, the highest award given to a faculty member at UMaine; and the American Society of Civil Engineers Charles Pankow Innovation Award.

Dagher earned his Ph.D. in structural engineering from the University of Wisconsin–Madison, as well as two master's degrees in structural engineering and engineering mechanics, and joined the University of Maine faculty in 1985.

Research and Development Projects

The UMaine-developed, patent-pending, VolturnUS floating concrete hull technology can support wind turbines in water depths of 45 meters or more, and has the potential to significantly reduce the cost of offshore wind. VolturnUS Launch in Brewer, ME.jpg
The UMaine-developed, patent-pending, VolturnUS floating concrete hull technology can support wind turbines in water depths of 45 meters or more, and has the potential to significantly reduce the cost of offshore wind.

VolturnUS 1:8

In Summer 2013, the center deployed the first grid-connected offshore wind turbine in the United States [6] and the only floating turbine with a concrete hull in the world. The patented [7] [8] VolturnUS technology is the culmination of collaborative research and development conducted by the University of Maine-led DeepCwind Consortium. VolturnUS 1:8 is a 65 feet (20 meters) tall floating turbine prototype; 1:8th the scale of a 6 megawatt (MW), 425 feet (130 meters) rotor diameter design. Funding for this research was provided by the U.S. Department of Energy, the National Science Foundation, and others.

Maine Aqua Ventus, I, GP, LLC, is pursuing a 12 MW demonstration project off the coast of Monhegan Island, ME, using the VolturnUS floating platform technology. [9]

DeepCLiDAR

DeepCLiDAR is an advanced metocean buoy outfitted with LIDAR, created with funding from the US Department of Energy and the Maine Technology Institute. DeepCLiDAR can be used in remote marine environments to provide high quality, low-cost offshore wind resource data, metocean monitoring, and ecological characterization capabilities. It was developed in partnership with Dr. Neal Pettigrew of the UMaine Physical Oceanography Group, AWS Truepower, and NRG Renewable Systems.

The Perkins Bridge in Belfast, ME was installed in 2010 by Advanced Infrastructure Technologies. This composite arch bridge has a 48.0' span made up of 16 composite arches. Composite Arch Bridge in Belfast, ME.jpg
The Perkins Bridge in Belfast, ME was installed in 2010 by Advanced Infrastructure Technologies. This composite arch bridge has a 48.0’ span made up of 16 composite arches.

Composite Arch Bridge System

The Composite Arch Bridge System, commonly known as Bridge-in-a-Backpack, is a lightweight, corrosion resistant system for short to medium span bridge construction using composite arch tubes that act as reinforcement and formwork for cast-in-place concrete. [10] The center's innovative composite bridge system is American Association of State Highway and Transportation Officials approved, lowers construction costs, extends structural lifespan up to 100 years, and is a greener alternative to concrete and steel construction. Advanced Infrastructure Technologies is a privately held company licensed by the University of Maine to produce these bridges.

In January 2017, Advanced Infrastructure Technologies signed a distribution and marketing agreement for North America with Terre Armee Group/Reinforced Earth Company, which aims to expand adoption of the composite arch bridge system technology. [11]

Longest composite bridge in the world

Longterm durability of bridges is a major concern for transportation departments across the country. In response to this concern, the UMaine Composites Center validated a hybrid composite beam designed by HC Bridge Company, LLC, that was fabricated by Harbor Technologies in Brunswick, Maine. The hybrid composite beam, made of fiber-reinforced polymer, is lightweight, corrosion-resistant, and strong enough to be used for bridge construction. The Knickerbocker Bridge, over Back River in Boothbay, ME, is the longest composite bridge in the world at 540 feet (160 meters) long and is 32 feet (9.8 meters) wide. The bridge opened to traffic in 2011.

MAKO

Designed in partnership with Hodgdon Defense Composites and Maine Marine Manufacturing, the UMaine Composites Center performed testing on a special operations boat with a fully composite hull to replace the aluminum hull craft currently used by US Navy SEALs. This 83 feet (25 meters) long, impact-resistant prototype is the result of a $15 million research and development project that resulted in the first all-composites hull for the US Navy.

Secure Hybrid Composite Shipping Container

Funded by the Department of Homeland Security, the UMaine Composites Center developed a patent-pending [12] shipping container that mitigates security risks associated with marine cargo. Georgia Tech Research Institute designed the security system for the container, featuring embedded sensors to detect intrusions, door opening sensors to monitor access to the container, and a communication system capable of reporting the security status from anywhere in the world. This technology is now in field trials toward commercialization.

Modular Ballistic Protection System (MBPS)

MBPS, developed in partnership with the US Army Natick Soldier RD&E Center, provides soldiers with enhanced ballistic protection in the field. The patent-pending [13] MBPS is a quickly erectable, re-deployable, and lightweight ballistic protection system. MBPS provides ballistic protection for personnel and equipment in expeditionary base camps where mobility and rapid deployment requirements prevent the immediate use of heavyweight systems like sandbags and concrete barriers. MBPS requires no tools to up-armor a standard issue 20 by 32 feet (6.1 by 9.8 meters) tent and can be deployed in less than 30 minutes by 4 soldiers.

Blast Resistant Structures

In partnership with the US Army Corps of Engineers ERDC, the UMaine Composites Center developed blast-resistant structures with coated wood framing members, panels and subassemblies. [14] These blast-resistant materials are economically coated to enhance the construction material's ductility and energy dissipation capacity. In addition to superior blast resistance, benefits of these structures include: cost-efficiencies, ease of assembly, environmental durability, rapid deployment, high strength to weight ratios, and protection from moisture absorption, termites, ants and biodegradation.

Advanced Engineered Wood Composites (AEWC) Center

In 1996, the center was opened as the Advanced Engineered Wood Composites Center. In 2012, the organization formally underwent a name change as approved by the University of Maine System Board of Trustees to the Advanced Structures and Composites Center. This name change was a reflection of research foci expanded beyond wood composites to include other areas such as: ocean energy, defense and aerospace composites, civil infrastructure, and nanocomposites. [15]

Notable Awards

2000 - 2015

On October 13, 2015, Dr. Habib Dagher, founding Director of the University of Maine's Advanced Structures and Composites Center, was recognized as a "2015 White House Transportation Champion of Change. [16] " Dr. Dagher is the primary inventor of the composite arch bridge system.

American Society of Civil Engineers Pankow Award for Innovation, presented to the Advanced Structures and Composites Center for its development of Bridge-in-a-Backpack, March 31, 2011. [17]

American Composites Manufacturers Association, Most Creative Product Award to the Advanced Structures and Composites Center's Bridge-in-a-Backpack™, February 2010. [18]

American Composites Manufacturers Association, Most Creative Product to the Advanced Structures and Composites Center's blast resistant panels, January 16, 2009. [19]

American Composites Manufacturers Association (ACMA) People's Choice Award for exhibiting the highest degree of design, innovation, creativity and the best use of composite materials to Modular Ballistic Protection System. Oct 15, 2007. [20]

American Composites Manufacturers Association (ACMA) Best of Show Award, recognized as the highest composites industry award, for being the year's finest product, to Modular Ballistic Protection System. Oct 15, 2007. [21]

Related Research Articles

<span class="mw-page-title-main">Kevlar</span> Heat-resistant and strong aromatic polyamide fiber

Kevlar (para-aramid) is a strong, heat-resistant synthetic fiber, related to other aramids such as Nomex and Technora. Developed by Stephanie Kwolek at DuPont in 1965, the high-strength material was first used commercially in the early 1970s as a replacement for steel in racing tires. It is typically spun into ropes or fabric sheets that can be used as such, or as an ingredient in composite material components.

<span class="mw-page-title-main">University of Maine</span> Public research university in Orono, Maine, US

The University of Maine (UMaine) is a public land-grant research university in Orono, Maine. It was established in 1865 as the land-grant college of Maine and is the flagship university of the University of Maine System. It is classified among "R1: Doctoral Universities – Very high research activity".

<span class="mw-page-title-main">Vehicle armour</span> High-strength plating used to fortify important vehicles against bullets, shells etc.

Military vehicles are commonly armoured to withstand the impact of shrapnel, bullets, shells, rockets, and missiles, protecting the personnel inside from enemy fire. Such vehicles include armoured fighting vehicles like tanks, aircraft, and ships.

Ultra-high-molecular-weight polyethylene is a subset of the thermoplastic polyethylene. Also known as high-modulus polyethylene (HMPE), it has extremely long chains, with a molecular mass usually between 3.5 and 7.5 million amu. The longer chain serves to transfer load more effectively to the polymer backbone by strengthening intermolecular interactions. This results in a very tough material, with the highest impact strength of any thermoplastic presently made.

<span class="mw-page-title-main">Metal foam</span> Porous material made from a metal

In materials science, a metal foam is a material or structure consisting of a solid metal with gas-filled pores comprising a large portion of the volume. The pores can be sealed or interconnected. The defining characteristic of metal foams is a high porosity: typically only 5–25% of the volume is the base metal. The strength of the material is due to the square–cube law.

The Rhino Runner is a type of armored bus used extensively in Iraq, especially on the infamous Route Irish between Baghdad International Airport and The Green Zone. It is a customized vehicle created by Labock Technologies, which was purchased in 2008 by another company called Advanced Blast Protection. In 2010 Advanced Blast Protection was purchased by Armour Group, Inc. The Rhino Runner® is made in various sizes with different purposes. Duties include normal transport of civilian contractors and military personnel, and usage by VIPs, including transport of prisoners involved in the Iraqi Special Tribunal.

<span class="mw-page-title-main">Very large floating structure</span> Artificial islands used as infrastructure in aquatic environments

Very large floating structures (VLFSs) or very large floating platforms (VLFPs) are artificial islands, which may be constructed to create floating airports, bridges, breakwaters, piers and docks, storage facilities, wind and solar power plants, for military purposes, to create industrial space, emergency bases, entertainment facilities, recreation parks, mobile offshore structures and even for habitation. Currently, several different concepts have been proposed for building floating cities or huge living complexes. Some units have been constructed and are presently in operation.

Marine architecture is the design of architectural and engineering structures which support coastal design, near-shore and off-shore or deep-water planning for many projects such as shipyards, ship transport, coastal management or other marine and/or hydroscape activities. These structures include harbors, lighthouses, marinas, oil platforms, offshore drillings, accommodation platforms and offshore wind farms, floating engineering structures and building architectures or civil seascape developments. Floating structures in deep water may use suction caisson for anchoring.

<span class="mw-page-title-main">Wind power in the United States</span>

Wind power is a branch of the energy industry that has expanded quickly in the United States over the last several years. From January through December 2023, 425.2 terawatt-hours were generated by wind power, or 10.18% of electricity in the United States. The average wind turbine generates enough electricity in 46 minutes to power the average American home for one month. In 2019, wind power surpassed hydroelectric power as the largest renewable energy source in the U.S.

<span class="mw-page-title-main">Abdus Suttar Khan</span> Bangladeshi scientist (1941–2008)

Abdus Suttar Khan was a Bangladeshi scientist. He researched on aerospace for four decades with NASA, United Technology, and Alstom, a French power generation company. Khan invented more than forty different alloys for commercial application in space shuttles, jet engines, train engines and industrial gas turbines.

Ceramic armor is armor used by armored vehicles and in personal armor to resist projectile penetration through its high hardness and compressive strength. In its most basic form, it consists of two primary components: A ceramic layer on the outer surface, called the "strike face," backed up by a ductile fiber reinforced plastic composite or metal layer. The role of the ceramic is to (1) fracture the projectile or deform the projectile nose upon impact, (2) erode and slow down the projectile remnant as it penetrates the shattered ceramic layer, and (3) distribute the impact load over a larger area, which can be absorbed by ductile polymer or metallic backings. Ceramics are often used where light weight is important, as they weigh less than metal alloys for a given degree of resistance. The most common materials are alumina, boron carbide, and, to a lesser extent, silicon carbide.

<span class="mw-page-title-main">Floating wind turbine</span> Type of wind turbine

A floating wind turbine is an offshore wind turbine mounted on a floating structure that allows the turbine to generate electricity in water depths where fixed-foundation turbines are not feasible. Floating wind farms have the potential to significantly increase the sea area available for offshore wind farms, especially in countries with limited shallow waters, such as Spain, Portugal, Japan, France and the United States' West Coast. Locating wind farms further offshore can also reduce visual pollution, provide better accommodation for fishing and shipping lanes, and reach stronger and more consistent winds.

There are a number of wind power projects in the state of Maine, totaling more than 900 megawatts (MW) in capacity. In 2020 they were responsible for 24% of in-state electricity production. In 2019, Maine had more wind capacity than the other five New England states combined, at 923 MW.

<span class="mw-page-title-main">Wind turbine</span> Machine that converts wind energy into electrical energy

A wind turbine is a device that converts the kinetic energy of wind into electrical energy. As of 2020, hundreds of thousands of large turbines, in installations known as wind farms, were generating over 650 gigawatts of power, with 60 GW added each year. Wind turbines are an increasingly important source of intermittent renewable energy, and are used in many countries to lower energy costs and reduce reliance on fossil fuels. One study claimed that, as of 2009, wind had the "lowest relative greenhouse gas emissions, the least water consumption demands and the most favorable social impacts" compared to photovoltaic, hydro, geothermal, coal and gas energy sources.

<span class="mw-page-title-main">Offshore wind power</span> Wind turbines in marine locations for electricity production

Offshore wind power or offshore wind energy is the generation of electricity through wind farms in bodies of water, usually at sea. There are higher wind speeds offshore than on land, so offshore farms generate more electricity per amount of capacity installed. Offshore wind farms are also less controversial than those on land, as they have less impact on people and the landscape.

The DeepCwind Consortium was a national consortium of universities, nonprofits, utilities, and industry leaders. The mission of the consortium was to establish the State of Maine as a national leader in floating offshore wind technology. Much of the consortium's work and resulting research was funded by the U.S. Department of Energy, the National Science Foundations, and others.

<span class="mw-page-title-main">VolturnUS</span>

The VolturnUS is a floating concrete structure that supports a wind turbine, designed by University of Maine Advanced Structures and Composites Center and deployed by DeepCwind Consortium in 2013. The VolturnUS can support wind turbines in water depths of 150 ft (46 m) or more. The DeepCwind Consortium and its partners deployed a 1:8 scale VolturnUS in 2013. Efforts are now underway by Maine Aqua Ventus 1, GP, LLC, to deploy to full-scale VolturnUS structures off the coast of Monhegan Island, Maine, in the UMaine Deepwater Offshore Wind Test Site. This demonstration project, known as New England Aqua Ventus I, is planned to deploy two 6 MW wind turbines by 2020.

The University of Maine (UMaine) Deepwater Offshore Wind Test Site, located nearly 3 miles south west of Monhegan Island, Maine is available for use by commercial and non-commercial entities in partnership with the University of Maine, or the University of Maine itself, to research and develop ocean energy devices, such as floating wind turbines or wave energy converters.

Seawind Ocean Technology B.V., a Netherlands based company, is a manufacturer (OEM) of integrated floating wind turbine and green hydrogen systems. Seawind is developing two-bladed floating wind turbines suitable for installation in all seas, including hurricane regions and ultra-deep waters. Founded on original research and development work by NASA, Hamilton Standard, Enel, and Aeritalia; Seawind's offshore wind power turbines with integrated foundations have been patented, proven at 1.5 MW, and achieved Type D DNV certification in December 2019. The company is now planning the launch of its Seawind 6 demonstrator to be followed by the pre-series Seawind 12, a project earmarked for installation as early as 2024-25 that seeks to obtain DNV's highest certification level.

<span class="mw-page-title-main">Offshore wind power in the United States</span>

Offshore wind power is in the early stages of development in the United States. In 2016, the United States Department of Energy estimated that the country has a gross resource potential of 10,800GW of offshore wind capacity, with a "technical" resource potential of 2,058GW. Offshore wind projects are under development in wind-rich areas of the East Coast, Great Lakes, and Pacific coast. The first commercial offshore wind farm, Block Island Wind Farm, began operation in 2016. As of 2017, about 30 projects totaling 24 gigawatts (GW) of potential installed capacity were being planned.

References

  1. "Alfond W2 Ocean Engineering Lab". Advanced Structures & Composites Center. University of Maine. Retrieved 2016-07-06.
  2. "Who We Are". UMaine Advanced Structures and Composites Center. University of Maine.
  3. "ISO 17025 Accreditation". Advanced Structures & Composites Center. University of Maine. Retrieved 2016-07-06.
  4. "Provost Names Signature and Emerging Areas of Excellence in Research and Education". UMaine News. University of Maine. 30 June 2014. Retrieved 6 July 2016.
  5. "Patent Portfolio". UMaine Advanced Structures and Composites Center. Retrieved 6 July 2016.
  6. Dagher, Viselli (2015). "Model test of a 1: 8-scale floating wind turbine offshore in the gulf of maine" (PDF). Journal of Offshore Mechanics and Arctic Engineering. 137 (4).
  7. Dagher, Habib J.; Viselli, Anthony M.; Goupee, Andrew J. (Aug 29, 2013), Floating Hybrid Composite Wind Turbine Platform and Tower System , retrieved 2016-07-06
  8. Dagher, Habib J.; Viselli, Anthony M.; Goupee, Andrew J. (Sep 12, 2013), Floating Wind Turbine Platform and Method of Assembling , retrieved 2016-07-06
  9. "Floating Offshore Wind In Maine - Advanced Structures & Composites Center - University of Maine". Advanced Structures & Composites Center. Retrieved 2017-02-21.
  10. Dagher, Habib J.; Landis, Eric N.; Chiti, Imad W. El (Oct 7, 2014), Rapidly-deployable lightweight load resisting arch system , retrieved 2016-07-06
  11. "Bridge-In-A-Backpack spinoff company signs North American marketing and distribution agreement with international construction and engineering firm Terre Armee Internationale - Advanced Structures & Composites Center - University of Maine". Advanced Structures & Composites Center. 2017-01-19. Retrieved 2017-02-21.
  12. Dagher, Habib J.; Cassidy, Eric D.; Viselli, Anthony M. (Oct 21, 2014), Composite weldable panel with embedded devices , retrieved 2016-07-06
  13. Dagher, Habib J.; Melrose, Paul T.; Parent, Laurent R.; Nader, Jacques W. (Nov 25, 2010), Composite panel for blast and ballistic protection , retrieved 2016-07-06
  14. Dagher, Habib J.; Cassidy, Eric D.; Parent, Laurent R.; Dumais, Anthony J.; Nagy, Edwin N.; O'Neil, Robert T.; Nye, Richard F. (Dec 3, 2013), Blast mitigation and ballistic protection system and components thereof , retrieved 2016-07-06
  15. "Who We Are". UMaine Advanced Structures and Composites Center. University of Maine. Retrieved 6 July 2016.
  16. "eyond Traffic: Innovators in Transportation". whitehouse.gov . Champions of Change. October 2015. Retrieved 6 July 2016 via National Archives.
  17. "Awards and Honors". UMaine Advanced Structures and Composites Center. University of Maine. Retrieved 6 July 2016.
  18. "Awards and Honors". UMaine Advanced Structures and Composites Center. University of Maine. Retrieved 6 July 2016.
  19. "Awards and Honors". UMaine Advanced Structures and Composites Center. University of Maine. Retrieved 6 July 2016.
  20. "Awards and Honors". UMaine Advanced Structures and Composites Center. University of Maine. Retrieved 6 July 2016.
  21. "Awards and Honors". UMaine Advanced Structures and Composites Center. University of Maine. Retrieved 6 July 2016.