![]() USCGC Bailey Barco at 2020 | |
History | |
---|---|
![]() | |
Name | Bailey Barco |
Namesake | Bailey T. Barco |
Operator | United States Coast Guard |
Builder | Bollinger Shipyards, Lockport, Louisiana |
Launched | February 7, 2017 |
Acquired | February 7, 2017 [1] |
Commissioned | June 14, 2017 [2] |
Homeport | Ketchikan, Alaska |
Identification |
|
Motto | Initiative courage fortitude |
Status | in active service |
Badge | ![]() |
General characteristics | |
Class and type | Sentinel-class cutter |
Displacement | 353 long tons (359 t) |
Length | 46.8 m (154 ft) |
Beam | 8.11 m (26.6 ft) |
Depth | 2.9 m (9.5 ft) |
Propulsion |
|
Speed | 28 knots (52 km/h; 32 mph) |
Range | 2,500 nautical miles (4,600 km; 2,900 mi) |
Endurance | 5 days |
Boats & landing craft carried | 1 × Short Range Prosecutor RHIB |
Complement | 2 officers, 20 crew |
Sensors and processing systems | L-3 C4ISR suite |
Armament |
|
USCGC Bailey Barco (WPC-1122) is the United States Coast Guard's 22nd Sentinel-class cutter, and the second to be stationed in Alaska, where she was homeported at Coast Guard Base Ketchikan. [3] [4]
The vessel's manufacturer, Bollinger Shipyards, of Lockport, Louisiana, delivered the ship to the Coast Guard on February 7, 2017, for her acceptance trials. [1] [3] [4] After completion sea trials, USCGC Bailey Barco was commissioned on June 14, 2017 in Juneau, Alaska. [2] [5]
The Sentinel-class cutters are lightly armed patrol vessels with a crew of approximately two dozen sailors, capable of traveling almost 3,000 nautical miles, on five day missions. The cutter is a multi-mission vessel intended to perform law enforcement, search and rescue, fisheries and environmental protection, and homeland security tasks. [4]
In 2010, Charles "Skip" W. Bowen, who was then the United States Coast Guard's most senior non-commissioned officer, proposed that all 58 cutters in the Sentinel class should be named after enlisted sailors in the Coast Guard, or one of its precursor services, who were recognized for their heroism. [6] [7] In 2014 the Coast Guard announced that Bailey T. Barco, a keeper in the United States Lifesaving Service, one of the agencies merged to form the US Coast Guard, who earned a Gold lifesaving medal for managing the daring rescue of the crew of a sailing schooner that ran aground during a severe winter storm off Virginia Beach, in 1901, would be the namesake of the 22nd cutter. [5] [8] [9]
The Sentinel-class cutter, also known as Fast Response Cutter due to its program name, is part of the United States Coast Guard's Deepwater program. At 154 feet (46.8 m) it is similar to, but larger than the 123-foot (37 m) lengthened 1980s-era Island-class patrol boats that it replaces. Up to 58 vessels are to be built by the Louisiana-based firm Bollinger Shipyards, using a design from the Netherlands-based Damen Group, with the Sentinel design based on the company's Damen Stan 4708 patrol vessel. The Department of Homeland Security's budget proposal to Congress, for the Coast Guard, for 2021, stated that, in addition to 58 vessels to serve the Continental US, they requested an additional six vessels for its portion of Patrol Forces South West Asia.
USCGC Winslow Griesser (WPC-1116) was the sixteenth Sentinel-class cutter to be delivered. She will be the fourth of six Sentinel-class vessels to be stationed in San Juan, Puerto Rico. Bollinger shipyards delivered her to the United States Coast Guard, in Key West, Florida, on December 23, 2015. After she completed her acceptance trials, she was commissioned on March 11, 2016.
Winslow W. Griesser (1856–1931) was a station keeper in the United States Life-Saving Service, one of the agencies that were merged to form the United States Coast Guard. In 2016 the Coast Guard honored him by naming one of its new Sentinel-class cutters after him.
USCGC Lawrence Lawson is the 20th Sentinel-class cutter to be delivered to the United States Coast Guard. She was built at Bollinger Shipyards, in Lockport, Louisiana, and delivered to the Coast Guard, for her sea trials, on October 20, 2016. She was commissioned on March 18, 2017. She is the second cutter of her class to be the homeported at the Coast Guard Training Center in Cape May, New Jersey, and also the second to be stationed outside of the Caribbean.
USCGC John McCormick (WPC-1121) is the United States Coast Guard's 21st Sentinel-class cutter, and the first to be stationed in Alaska, where homeported at Coast Guard Base Ketchikan.
Coast Guard Base Ketchikan is a major shore installation of the United States Coast Guard located in Ketchikan, Alaska. The base is a homeport for two Sentinel-class cutters and a buoy tender, and is the only Coast Guard dry dock in the state. Located one mile south of the city's downtown area along the southwestern shore of Revillagigedo Island, the base was originally established in 1920 to support the United States Lighthouse Service and became part of the Coast Guard in 1940. In addition to the homeported cutters, Base Ketchikan's maintenance facilities support forward-deployed cutters throughout Southeast Alaska, in Petersburg, Juneau and Sitka.
Bailey Taylor Barco was a heroic stationkeeper and Captain with the United States Life-Saving Service—one of the agencies later merged into the United States Coast Guard. He led a heroic rescue at his station in Virginia Beach, on December 21, 1900.
USCGC Benjamin Dailey (WPC-1123) is the United States Coast Guard's 23rd Sentinel-class cutter. She is the first cutter of her class stationed in the Coast Guard's Eight District, with a homeport in Pascagoula, MS.
Oliver Fuller Berry was a Chief Petty Officer in the United States Coast Guard who was chosen to be the namesake for the twenty-fourth cutter of the Sentinel class. He was one of the first Coast Guard aircraft technicians trained to work on helicopters.
Jacob Poroo was a medic for the United States Coast Guard who died of burns suffered when fire struck the remote Alaskan base he was assigned to.
USCGC Joseph Gerczak (WPC-1126) is the 26th Sentinel-class cutter built for the United States Coast Guard. She will be the second member of the three members of her class to be homeported in Honolulu, Hawaii.
USCGC Forrest Rednour (WPC-1129) is the 29th Sentinel-class cutter built for the United States Coast Guard. She is the first of the four vessels of her class to be home-ported in San Pedro, California. Other sister ships have been based in Florida, Mississippi, Puerto Rico, New Jersey, North Carolina, Hawaii and Alaska. But Forrest Rednour is the first to be homeported on the west coast of the lower 48 states. The vessel will be homeported at a base near Los Angeles' Terminal Island. Three sister ships will join her, at this base.
USCGC Joseph Doyle (WPC-1133) is the United States Coast Guard's 33rd Sentinel-class cutter. She was completed, and transferred to Coast Guard, in Key West, for her acceptance trials, on March 21, 2019. She was commissioned on June 8, 2019, and the first of a second cohort of cutters commissioned in San Juan, Puerto Rico. The first batch of six cutters were commissioned there in 2015 and 2016.
John F. McCormick was a sailor in the United States Coast Guard who was recognized for his courage. McCormick was born in Portland, Oregon, and served much of his 26 year Coast Guard career in Oregon. After his 1947 retirement, he made his home in Garibaldi, Oregon; he lived there for another 39 years.
USCGC Daniel Tarr (WPC-1136) is the United States Coast Guard's 36th Sentinel-class cutter, and the first of three to be homeported in Galveston, Texas.
USCGC William Sparling (WPC-1154) will be the United States Coast Guard's 54th Sentinel-class cutter.
USCGC Harold Miller (WPC-1138) is the United States Coast Guard's 38th Sentinel-class cutter.
USCGC Glen Harris (WPC-1144) will be the United States Coast Guard's 44th Sentinel-class cutter.
USCGC Edgar Culbertson (WPC-1137) is the United States Coast Guard's 37th Sentinel-class cutter, and the second of three to be homeported in Galveston, Texas.
USCGC Charles Moulthrope (WPC-1141) is the United States Coast Guard's 41st Sentinel-class cutter, and the first of six to be homeported in Manama, Bahrain.
This vessel is named after McCormick, awarded the Gold Lifesaving Medal on Nov. 7, 1938, for his heroic action in rescuing a fellow Coast Guardsman in treacherous conditions where the mouth of the Columbia River meets the Pacific Ocean in northwest Oregon.
The U.S. Coast Guard has taken delivery of USCGC Bailey Barco on February 7, 2017 in Key West, Fla. The vessel is scheduled to be commissioned in Ketchikan, Alaska in June, 2017.
The newest cutter for Alaska, the 154-foot Bailey Barco, officially entered service during a commissioning ceremony June 14 on the Juneau waterfront.
After the passing of several well-known Coast Guard heroes last year, Master Chief Petty Officer of the Coast Guard Charles "Skip" Bowen mentioned in his blog that the Coast Guard does not do enough to honor its fallen heroes.
Previously designated to be named the Coast Guard Cutter Sentinel, the cutter Bernard C. Webber will be the first of the service's new 153-foot patrol cutters. Coast Guard Commandant Admiral Thad Allen approved the change of the cutter's name to allow this class of vessels to be named after outstanding enlisted members who demonstrated exceptional heroism in the line of duty. This will be the first class of cutters to be named exclusively for enlisted members of the Coast Guard and its predecessor services.
Bailey Barco’s exemplary courage, fortitude and initiative in this valiant rescue reflected the highest honor upon himself and were in keeping with the highest traditions of the U.S. Life-Saving Service. For extreme and heroic action, Barco was awarded the Gold Lifesaving Medal on Oct. 7, 1901.
The Coast Guard recently announced the names of 10 Sentinel-Class Fast Response Cutters (WPCs 1116-1125) through a series of posts on its official blog, the Coast Guard Compass. Like the first 15 ships in the class, each ship will honor a Coast Guard enlisted hero.
![]() | Wikimedia Commons has media related to USCGC Bailey Barco (WPC-1122) . |