USCGC Donald Horsley

Last updated
Coast Guard commissions 17th fast response cutter, USCGC Donald Horsley, in San Juan, Puerto Rico -a.jpg
Commissioning Donald Horsley.
History
Ensign of the United States Coast Guard.svgUnited States
NameDonald Horsley
NamesakeDonald Horsley
Operator United States Coast Guard
Builder Bollinger Shipyards, Lockport, Louisiana
LaunchedMarch 5, 2016
AcquiredMarch 5, 2016 [1]
CommissionedMay 20, 2016 [2]
Homeport San Juan, Puerto Rico
Identification
MottoFacere inferna (Raise hell)
Statusin active service
Badge USCGC Donald Horsley (WPC 1117) CoA.jpg
General characteristics
Class and type Sentinel-classcutter
Displacement353 long tons (359  t)
Length46.8 m (154 ft)
Beam8.11 m (26.6 ft)
Depth2.9 m (9.5 ft)
Propulsion
  • 2 × 4,300 kW (5,800 shp)
  • 1 × 75 kW (101 shp) bow thruster
Speed28 knots (52 km/h; 32 mph)
Endurance
  • 5 days, 2,500 nmi (4,600 km; 2,900 mi)
  • Designed to be on patrol 2,500 hours per year
Boats & landing
craft carried		1 × Cutter Boat - Over the Horizon OTH-IV
Complement4 officers, 20 crew
Sensors and
processing systems		L-3 C4ISR suite
Armament

USCGC Donald Horsley (WPC-1117) is the United States Coast Guard's 17th Sentinel-classcutter. She was commissioned on May 20, 2016. [2] [3] She was the fifth of a cohort of six FRCs home-ported in San Juan, Puerto Rico.

Contents

Namesake

In 2010, Master Chief Petty Officer of the Coast Guard Charles "Skip" W. Bowen, the U.S. Coast Guard's senior enlisted person at the time, lobbied for the new Sentinel-class cutters to be named after enlisted Coast Guardsmen, or personnel from its precursor services, who had distinguished themselves by their heroism. [4] [5] [6] Donald R. Horsley rose to the rank of Master Chief, retiring with eleven service stripes, indicating 44 years of service. He served in three wars, and received multiple awards for valor. [7] [8]

Related Research Articles

Sentinel-class cutter United States Coast Guard cutter class

The Sentinel-class cutter, also known as Fast Response Cutter due to its program name, is part of the United States Coast Guard's Deepwater program. At 154 feet (46.8 m) it is similar to, but larger than the 123-foot (37 m) lengthened 1980s-era Island-class patrol boats that it replaces. Up to 58 vessels are to be built by the Louisiana-based firm Bollinger Shipyards, using a design from the Netherlands-based Damen Group, with the Sentinel design based on the company's Damen Stan 4708 patrol vessel. The Department of Homeland Security's budget proposal to Congress, for the Coast Guard, for 2021, stated that, in addition to 58 vessels to serve the Continental US, they requested an additional six vessels for its portion of Patrol Forces South West Asia.

USCGC <i>Heriberto Hernandez</i>

USCGC Heriberto Hernandez is the 14th Sentinel-class cutter delivered to the United States Coast Guard. Like five of her sister ships, her initial assignment will see her based in San Juan, Puerto Rico.

USCGC <i>Joseph Napier</i>

USCGC Joseph Napier is a Sentinel-class cutter homeported in San Juan, Puerto Rico. She is the fifteenth Sentinel class to be delivered, and the third of six to be assigned to Puerto Rico. she was commissioned on 29 January 2016.

USCGC <i>Winslow W. Griesser</i>

USCGC Winslow Griesser (WPC-1116) was the sixteenth Sentinel-class cutter to be delivered. She will be the fourth of six Sentinel-class vessels to be stationed in San Juan, Puerto Rico. Bollinger shipyards delivered her to the United States Coast Guard, in Key West, Florida, on December 23, 2015. After she completed her acceptance trials, she was commissioned on March 11, 2016.

USCGC <i>Richard Dixon</i>

USCGC Richard Dixon is the United States Coast Guard's thirteenth Sentinel-class cutter, commissioned in Tampa, Florida, on June 20, 2015. She arrived in her home port of San Juan, Puerto Rico on June 24, 2015.

Winslow W. Griesser

Winslow W. Griesser (1856–1931) was a station keeper in the United States Life-Saving Service, one of the agencies that were merged to form the United States Coast Guard. In 2016 the Coast Guard honored him by naming one of its new Sentinel-class cutters after him.

USCGC <i>Lawrence O. Lawson</i>

USCGC Lawrence Lawson is the 20th Sentinel-class cutter to be delivered to the United States Coast Guard. She was built at Bollinger Shipyards, in Lockport, Louisiana, and delivered to the Coast Guard, for her sea trials, on October 20, 2016. She was commissioned on March 18, 2017. She is the second cutter of her class to be the homeported at the Coast Guard Training Center in Cape May, New Jersey, and also the second to be stationed outside of the Caribbean.

USCGC <i>Rollin A. Fritch</i>

USCGC Rollin Fritch is the US Coast Guard's 19th Sentinel-class cutter, and the first to be homeported outside of the Caribbean. She is based at the Coast Guard Training Center in Cape May, New Jersey.

USCGC <i>Bailey T. Barco</i> USCGs 22nd cutter and the 2nd to be stationed in Alaska

USCGC Bailey Barco (WPC-1122) is the United States Coast Guard's 22nd Sentinel-class cutter, and the second to be stationed in Alaska, where she was homeported at Coast Guard Base Ketchikan.

USCGC <i>Benjamin B. Dailey</i>

USCGC Benjamin Dailey (WPC-1123) is the United States Coast Guard's 23rd Sentinel-class cutter. She is the first cutter of her class stationed in the Coast Guard's Eight District, with a homeport in Pascagoula, MS.

USCGC <i>Joseph Gerczak</i>

USCGC Joseph Gerczak (WPC-1126) is the 26th Sentinel-class cutter built for the United States Coast Guard. She will be the second member of the three members of her class to be homeported in Honolulu, Hawaii.

USCGC <i>Richard Snyder</i>

USCGC Richard Snyder (WPC-1127) is the 27th Sentinel-class cutter built for the United States Coast Guard. She is the first of her class to be home-ported in Atlantic Beach, North Carolina.

USCGC <i>Forrest Rednour</i>

USCGC Forrest Rednour (WPC-1129) is the 29th Sentinel-class cutter built for the United States Coast Guard. She is the first of the four vessels of her class to be home-ported in San Pedro, California. Other sister ships have been based in Florida, Mississippi, Puerto Rico, New Jersey, North Carolina, Hawaii and Alaska. But Forrest Rednour is the first to be homeported on the west coast of the lower 48 states. The vessel will be homeported at a base near Los Angeles' Terminal Island. Three sister ships will join her, at this base.

USCGC <i>Joseph Tezanos</i>

USCGC Joseph Tezanos (WPC-1118) is the United States Coast Guard's 18th Sentinel-class cutter. She was commissioned on August 26, 2016. She was the sixth of the first cohort of six FRCs home-ported in San Juan, Puerto Rico.

USCGC <i>Joseph Doyle</i>

USCGC Joseph Doyle (WPC-1133) is the United States Coast Guard's 33rd Sentinel-class cutter. She was completed, and transferred to Coast Guard, in Key West, for her acceptance trials, on March 21, 2019. She was commissioned on June 8, 2019, and the first of a second cohort of cutters commissioned in San Juan, Puerto Rico. The first batch of six cutters were commissioned there in 2015 and 2016.

USCGC <i>Daniel Tarr</i>

USCGC Daniel Tarr (WPC-1136) is the United States Coast Guard's 36th Sentinel-class cutter, and the first of three to be homeported in Galveston, Texas.

USCGC William Sparling (WPC-1154) will be the United States Coast Guard's 54th Sentinel-class cutter.

USCGC <i>Glen Harris</i>

USCGC Glen Harris (WPC-1144) will be the United States Coast Guard's 44th Sentinel-class cutter.

USCGC <i>Edgar Culbertson</i>

USCGC Edgar Culbertson (WPC-1137) is the United States Coast Guard's 37th Sentinel-class cutter, and the second of three to be homeported in Galveston, Texas.

USCGC <i>Charles Moulthrope</i> American Coast Guard fast response cutter

USCGC Charles Moulthrope (WPC-1141) is the United States Coast Guard's 41st Sentinel-class cutter, and the first of six to be homeported in Manama, Bahrain.

References

  1. ↑ "Acquisition Update: Coast Guard Accepts 17th Fast Response Cutter" (Press release). United States Coast Guard. 2016-03-07. Retrieved 2016-03-07.
  2. 1 2 "Coast Guard commissions Cutter Donald Horsley in San Juan". Coast Guard News. 2016-05-20. Retrieved 2016-05-20.
  3. ↑ Ricardo Castrodad (2016-05-20). "Coast Guard commissions 17th fast response cutter, USCGC Donald Horsley, in San Juan, Puerto Rico". United States Coast Guard . Retrieved 2016-07-14. The crew of the U.S. Coast Guard Cutter Donald Horsley salutes as the ship is brought to life during its commissioning at Coast Guard Sector San Juan, Puerto Rico May 20, 2016. The Donald Horsley is the Coast Guard's 17th Sentinel Class fast response cutter and the fifth of its kind to be homeported in San Juan, Puerto Rico.
  4. ↑ Susan Schept (2010-03-22). "Enlisted heroes honored". United States Coast Guard. Archived from the original on 2010-03-29. Retrieved 2013-02-01. After the passing of several well-known Coast Guard heroes last year, Master Chief Petty Officer of the Coast Guard Charles “Skip” Bowen mentioned in his blog that the Coast Guard does not do enough to honor its fallen heroes.
  5. ↑ Connie Braesch. "Coast Guard Heroes: Heriberto Hernandez". United States Coast Guard.
  6. ↑ "Acquisition Update: Coast Guard Unveils Names of FRCs 16-25". US Coast Guard. 2014-02-27. Archived from the original on 2014-09-26. Retrieved 2016-12-15. The Coast Guard recently announced the names of 10 Sentinel-Class Fast Response Cutters (WPCs 1116-1125) through a series of posts on its official blog, the Coast Guard Compass. Like the first 15 ships in the class, each ship will honor a Coast Guard enlisted hero.
  7. ↑ "Donald R. Horsley" (PDF). United States Coast Guard . Retrieved 2016-07-14.
  8. ↑ William Preston. "Heroic and Notable Coast Guard CPOs". United States Coast Guard . Retrieved 2016-07-14. The 11 service stripes on the left sleeve of his uniform symbolized a Coast Guard career of more than 44 years, practically all of them spent at sea.


This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.