USCGC Richard Snyder

Last updated
USCGC Richard Snyder (WPC-1127).jpg
Richard Snyder arriving at her homeport
History
Flag of the United States Coast Guard.svgUnited States
NameRichard Snyder
NamesakeRichard Snyder
Operator United States Coast Guard
Builder Bollinger Shipyards, Lockport, Louisiana
LaunchedFebruary 8, 2018
AcquiredFebruary 8, 2018 [1]
CommissionedApril 20, 2018 [2]
HomeportAtlantic Beach
Identification
MottoNever yield
Statusin active service
Badge USCGC Richard Snyder (WPC 1127) CoA.jpg
General characteristics
Class and type Sentinel-class cutter
Displacement353 long tons (359  t)
Length46.8 m (154 ft)
Beam8.11 m (26.6 ft)
Depth2.9 m (9.5 ft)
Propulsion
  • 2 × 4,300 kW (5,800 shp)
  • 1 × 75 kW (101 shp) bow thruster
Speed28 knots (52 km/h; 32 mph)
Range2,500 nautical miles (4,600 km; 2,900 mi)
Endurance5 days
Boats & landing
craft carried		1 × Cutter Boat - Over the Horizon Interceptor
Complement4 officers, 20 enlisted
Sensors and
processing systems		L-3 C4ISR suite
Armament

USCGC Richard Snyder (WPC-1127) is the 27th Sentinel-class cutter built for the United States Coast Guard. [3] She is the first of her class to be home-ported in Atlantic Beach, North Carolina.

Contents

Design

Like her sister ships, Richard Snyder is designed to perform search and rescue missions, port security, and the interception of smugglers. [4] She is armed with a remotely controlled, gyrostabilized 25 mm autocannon, four crew served M2 Browning machine guns, and light arms. She is equipped with a stern launching ramp that allows her to launch or retrieve a water-jet propelled high-speed auxiliary boat without first coming to a stop. Her high-speed boat has over-the-horizon capability, and is useful for inspecting other vessels and deploying boarding parties. She is designed to support her crew of 24 for missions of up to five days over distances of almost 3,000 nautical miles (5,556 km; 3,452 mi).

Operational history

Richard Snyder was delivered to a Coast Guard base in Key West for her sea trials on February 8, 2018. [1] [3] She was commissioned on April 20, 2018 at her home port in Atlantic Beach, North Carolina. [2] [5]

She is the 27th in a new generation of Sentinel-class cutters and the first fast-response cutter to be stationed in North Carolina. The patrol boat will be used for search-and-rescues, resource management and other missions.

In June of 2022, Richard Snyder began an extensive drydock period.

Namesake

In 2010, Charles "Skip" W. Bowen, who was then the United States Coast Guard's most senior non-commissioned officer, proposed that all 58 cutters in the Sentinel class should be named after enlisted sailors in the Coast Guard, or one of its precursor services, who were recognized for their heroism. [6] [7] [8] In 2015 the Coast Guard announced that Richard Snyder, who was awarded a Silver Star for attacking Japanese ground forces during an amphibious assault on the island of Biak, would be the namesake of the 27th cutter. [3]

Related Research Articles

Sentinel-class cutter United States Coast Guard cutter class

The Sentinel-class cutter, also known as the Fast Response Cutter due to its program name, is part of the United States Coast Guard's Deepwater program. At 154 feet (46.8 m), it is similar to, but larger than, the 123-foot (37 m) lengthened 1980s-era Island-class patrol boats that it replaces. Up to 58 vessels are to be built by the Louisiana-based firm Bollinger Shipyards, using a design from the Netherlands-based Damen Group, with the Sentinel design based on the company's Damen Stan 4708 patrol vessel. The Department of Homeland Security's budget proposal to Congress, for the Coast Guard, for 2021, stated that, in addition to 58 vessels to serve the Continental US, they requested an additional six vessels for its portion of Patrol Forces Southwest Asia.

USCGC <i>Bernard C. Webber</i>

USCGC Bernard C. Webber (WPC-1101) is the first of the United States Coast Guard's 58 Sentinel-class cutters. Like most of her sister ships, she replaced a 110-foot (34 m) Island-class patrol boat. Bernard C. Webber, and the next five vessels in the class, Richard Etheridge, William Flores, Robert Yered, Margaret Norvell, and Paul Clark, are all based in Miami, Florida.

USCGC <i>Paul Clark</i> American Sentinel-class cutter

USCGC Paul Clark (WPC-1106) is the sixth Sentinel-class cutter. Like the previous five vessels of her class she is homeported in Miami, Florida. She was delivered to the Coast Guard, for testing, on May 18, 2013.

USCGC <i>Winslow Griesser</i>

USCGC Winslow Griesser (WPC-1116) was the sixteenth Sentinel-class cutter to be delivered. She is the fourth of six Sentinel-class vessels to be stationed in San Juan, Puerto Rico. Bollinger shipyards delivered her to the United States Coast Guard, in Key West, Florida, on December 23, 2015. After she completed her acceptance trials, she was commissioned on March 11, 2016.

USCGC <i>Donald Horsley</i>

USCGC Donald Horsley (WPC-1117) is the United States Coast Guard's 17th Sentinel-class cutter. She was commissioned on May 20, 2016. She was the fifth of a cohort of six FRCs home-ported in San Juan, Puerto Rico.

USCGC <i>Lawrence O. Lawson</i>

USCGC Lawrence Lawson is the 20th Sentinel-class cutter to be delivered to the United States Coast Guard. She was built at Bollinger Shipyards, in Lockport, Louisiana, and delivered to the Coast Guard, for her sea trials, on October 20, 2016. She was commissioned on March 18, 2017. She is the second cutter of her class to be the homeported at the Coast Guard Training Center in Cape May, New Jersey, and also the second to be stationed outside of the Caribbean.

USCGC <i>Rollin Fritch</i>

USCGC Rollin Fritch is the US Coast Guard's 19th Sentinel-class cutter, and the first to be homeported outside of the Caribbean. She is based at the Coast Guard Training Center in Cape May, New Jersey.

USCGC <i>John McCormick</i> Sentinel-class cutter of the United States Coast Guard

USCGC John McCormick (WPC-1121) is the United States Coast Guard's 21st Sentinel-class cutter, and the first to be stationed in Alaska, where she is homeported at Coast Guard Base Ketchikan.

USCGC <i>Bailey Barco</i> USCGs 22nd cutter and the 2nd to be stationed in Alaska

USCGC Bailey Barco (WPC-1122) is the United States Coast Guard's 22nd Sentinel-class cutter, and the second to be stationed in Alaska, where she was homeported at Coast Guard Base Ketchikan.

USCGC <i>Benjamin Dailey</i>

USCGC Benjamin Dailey (WPC-1123) was the United States Coast Guard's 23rd Sentinel-class cutter. She was the first cutter of her class stationed in the Coast Guard's Eight District, with a homeport in Pascagoula, Mississippi.

USCGC <i>Joseph Gerczak</i> American Sentinel-class Coast Guard cutter

USCGC Joseph Gerczak (WPC-1126) is the 26th Sentinel-class cutter built for the United States Coast Guard. She is one of three Fast Response Cutters homeported in Honolulu, Hawaii.

USCGC <i>Forrest Rednour</i>

USCGC Forrest Rednour (WPC-1129) is the 29th Sentinel-class cutter built for the United States Coast Guard. She is the first of the four vessels of her class to be home-ported in San Pedro, California. Other sister ships have been based in Florida, Mississippi, Puerto Rico, New Jersey, North Carolina, Hawaii and Alaska. But Forrest Rednour is the first to be homeported on the west coast of the lower 48 states. The vessel will be homeported at a base near Los Angeles' Terminal Island. Three sister ships will join her, at this base.

USCGC <i>Oliver F. Berry</i>

USCGC Oliver Berry (WPC-1124) is the United States Coast Guard's 24th Sentinel-class cutter. She was the first member of the three members of her class to be homeported in Honolulu, Hawaii.

USCGC <i>Robert Ward</i>

USCGC Robert Ward (WPC-1130) is the 30th Sentinel-class cutter, and the second of four assigned to the U.S. Coast Guard Base Los Angeles / Long Beach, in Los Angeles, California.

USCGC <i>Daniel Tarr</i>

USCGC Daniel Tarr (WPC-1136) is the United States Coast Guard's 36th Sentinel-class cutter, and the first of three to be homeported in Galveston, Texas.

USCGC <i>William Sparling</i>

USCGC William Sparling (WPC-1154) is the United States Coast Guard's 54th Sentinel-class cutter.

USCGC <i>Harold Miller</i>

USCGC Harold Miller (WPC-1138) is the United States Coast Guard's 38th Sentinel-class cutter.

USCGC <i>Glen Harris</i>

USCGC Glen Harris (WPC-1144) will be the United States Coast Guard's 44th Sentinel-class cutter.

USCGC <i>Edgar Culbertson</i>

USCGC Edgar Culbertson (WPC-1137) is the United States Coast Guard's 37th Sentinel-class cutter, and the second of three to be homeported in Galveston, Texas.

USCGC <i>Charles Moulthrope</i> American Coast Guard fast response cutter

USCGC Charles Moulthrope (WPC-1141) is the United States Coast Guard's 41st Sentinel-class cutter, and the first of six to be homeported in Manama, Bahrain.

References

  1. 1 2 "Coast Guard Accepts 27th Fast Response Cutter" (Press release). United States Coast Guard. 2018-02-09. Retrieved 2018-02-10.
  2. 1 2 "Coast Guard Cutter Richard Snyder commissioned in Atlantic Beach". Coast Guard News. 2018-04-20. Retrieved 2018-04-20.
  3. 1 2 3 "U.S. Coast Guard Accepts 27th Fast Response Cutter, USCGC Richard Snyder". DefPost . 2018-02-10. Retrieved 2018-02-10. USCGC Richard Snyder will be the first Sentinel-class cutter (FRC) stationed in Atlantic Beach, North Carolina, and will be commissioned in April.
  4. ↑ "FRC Plan B: The Sentinel Class". Defense Industry Daily. 2014-05-02. Archived from the original on 2014-07-07. Retrieved 2014-04-03. All of these boats will be named after enlisted Coast Guard heroes, who distinguished themselves in USCG or military service. The first 25 have been named, but only 8 have been commissioned...
  5. ↑ Boyd, Jason O. (2018-04-20). "Coast Guard commissions Fast Response Cutter Richard Snyder". wcti12.com. Retrieved 2018-04-22.
  6. ↑ "Acquisition Update: Coast Guard Reveals Names of FRCs 26-35". US Coast Guard. 2015-02-27. Archived from the original on 2015-03-05. Retrieved 2017-03-25. The Coast Guard recently announced the names of the 26th through 35th Sentinel-class fast response cutters through a series of posts on its official blog, the Coast Guard Compass.
  7. ↑ Susan Schept (2010-03-22). "Enlisted heroes honored". United States Coast Guard. Archived from the original on 2011-12-03. Retrieved 2013-02-01. After the passing of several well-known Coast Guard heroes last year, Master Chief Petty Officer of the Coast Guard Charles "Skip" Bowen mentioned in his blog that the Coast Guard does not do enough to honor its fallen heroes.
  8. ↑ "U.S. Coast Guard announces name for first Sentinel-class cutter". 2010-03-22. Archived from the original on 2010-03-25. Retrieved 2013-02-01. Previously designated to be named the Coast Guard Cutter Sentinel, the cutter Bernard C. Webber will be the first of the service's new 153-foot patrol cutters. Coast Guard Commandant Admiral Thad Allen approved the change of the cutter's name to allow this class of vessels to be named after outstanding enlisted members who demonstrated exceptional heroism in the line of duty. This will be the first class of cutters to be named exclusively for enlisted members of the Coast Guard and its predecessor services.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.