USCGC Daniel Tarr

Last updated
USCGC Daniel Tarr (WPC-1136).jpg
USCGC Daniel Tarr after arrival in Key West, for her acceptance trials, on November 7, 2019
History
Ensign of the United States Coast Guard.svgUnited States
NameDaniel Tarr
Namesake Daniel Tarr
Operator United States Coast Guard
Builder Bollinger Shipyards, Lockport, Louisiana
AcquiredNovember 7, 2019 [1]
CommissionedJanuary 10, 2020 [2]
Homeport Galveston
Identification
MottoOptima prima, "Best First"
Statusin active service
Notes“ROLL TARR”
Badge USCGC Daniel Tarr (WPC 1136) CoA.jpg
General characteristics
Class and type Sentinel-class cutter
Displacement353 long tons (359  t)
Length46.8 m (153 ft 7 in)
Beam8.11 m (26 ft 7 in)
Depth2.9 m (9 ft 6 in)
Propulsion
  • 2 × 4,300 kW (5,800 shp)
  • 1 × 75 kW (101 shp) bow thruster
Speed28 knots (52 km/h; 32 mph)
Range2,500 nautical miles (4,600 km; 2,900 mi)
Endurance5 days
Boats & landing
craft carried		1 × Cutter Boat - Over the Horizon Interceptor
Complement4 officers, 20 crew
Sensors and
processing systems		L-3 C4ISR suite
Armament
NotesFirst Commanding Officer LT Nicholas Martin

USCGC Daniel Tarr (WPC-1136) is the United States Coast Guard's 36th Sentinel-class cutter, and the first of three to be homeported in Galveston, Texas. [3]

Contents

Design

Like her sister ships, Daniel Tarr is designed to perform search and rescue missions, port security, and the interception of smugglers. [4] She is armed with a remotely-controlled, gyro-stabilized 25 mm autocannon, four crew served M2 Browning machine guns, and light arms. She is equipped with a stern launching ramp, that allows her to launch or retrieve a water-jet propelled high-speed auxiliary boat, without first coming to a stop. Her high-speed boat has over-the-horizon capability, and is useful for inspecting other vessels, and deploying boarding parties.

The crew's drinking water needs are met through a desalination unit. [5] The crew mess is equipped with a television with satellite reception.

Operational career

Daniel Tarr was delivered to the Coast Guard, in Key West, on November 7, 2019, [1] and she was commissioned on January 10, 2020. [2] [3] on her first patrol she successfully interdicted 5 illegal Mexican launcha fishing vessels along with hundreds of feet of fishing line.

Namesake

In 2010, Master Chief Petty Officer of the Coast Guard Charles "Skip" W. Bowen, who was then the United States Coast Guard's most senior non-commissioned officer, proposed that all 58 cutters in the Sentinel class should be named after enlisted sailors in the Coast Guard, or one of its precursor services, who were recognized for their heroism. [6] [7] The Coast Guard chose Daniel Tarr as the namesake of the 36th cutter. [8] Tarr, and three other Coast Guard sailors, piloted the first landing craft during the United States first amphibious landing, in the Pacific Theater, during World War II. [9] Tarr, and his three colleagues were each awarded a Silver Star medal for this task. His colleagues Harold Miller and Glen Harris have Sentinel-class cutters named after them, as will his other colleague William Sparling.

Related Research Articles

Sentinel-class cutter United States Coast Guard cutter class

The Sentinel-class cutter, also known as Fast Response Cutter due to its program name, is part of the United States Coast Guard's Deepwater program. At 154 feet (46.8 m) it is similar to, but larger than the 123-foot (37 m) lengthened 1980s-era Island-class patrol boats that it replaces. Up to 58 vessels are to be built by the Louisiana-based firm Bollinger Shipyards, using a design from the Netherlands-based Damen Group, with the Sentinel design based on the company's Damen Stan 4708 patrol vessel. The Department of Homeland Security's budget proposal to Congress, for the Coast Guard, for 2021, stated that, in addition to 58 vessels to serve the Continental US, they requested an additional six vessels for its portion of Patrol Forces South West Asia.

USCGC <i>Paul Clark</i> American Sentinel-class cutter

USCGC Paul Clark (WPC-1106) is the sixth Sentinel-class cutter. Like the previous five vessels she is homeported in Miami, Florida. She was delivered to the Coast Guard, for testing, on May 18, 2013.

Richard Dixon (USCG)

Richard Dixon was the coxswain of a 44-foot Motor Lifeboat, on the July 4th weekend of 1980, when his skill and daring enabled him to rescue stricken pleasure boat crew off Tillamook Bay, Oregon. During the first incident a 58-foot yacht was in distress in the aftermath of hurricane Celia, and needed to seek sheltered waters, but wave conditions seemed likely to batter it apart if it tried to use the narrow entrance between two stone jetties to enter Tillamook Bay's harbor. Dixon and the coxswain of another motor lifeboat maneuvered beside the yacht, to absorb some of the wave energy as it entered harbor.

USCGC <i>Winslow W. Griesser</i>

USCGC Winslow Griesser (WPC-1116) was the sixteenth Sentinel-class cutter to be delivered. She will be the fourth of six Sentinel-class vessels to be stationed in San Juan, Puerto Rico. Bollinger shipyards delivered her to the United States Coast Guard, in Key West, Florida, on December 23, 2015. After she completed her acceptance trials, she was commissioned on March 11, 2016.

USCGC <i>Donald Horsley</i>

USCGC Donald Horsley (WPC-1117) is the United States Coast Guard's 17th Sentinel-class cutter. She was commissioned on May 20, 2016. She was the fifth of a cohort of six FRCs home-ported in San Juan, Puerto Rico.

USCGC <i>Lawrence O. Lawson</i>

USCGC Lawrence Lawson is the 20th Sentinel-class cutter to be delivered to the United States Coast Guard. She was built at Bollinger Shipyards, in Lockport, Louisiana, and delivered to the Coast Guard, for her sea trials, on October 20, 2016. She was commissioned on March 18, 2017. She is the second cutter of her class to be the homeported at the Coast Guard Training Center in Cape May, New Jersey, and also the second to be stationed outside of the Caribbean.

USCGC <i>John F. McCormick</i> Sentinel-class cutter of the United States Coast Guard

USCGC John McCormick (WPC-1121) is the United States Coast Guard's 21st Sentinel-class cutter, and the first to be stationed in Alaska, where homeported at Coast Guard Base Ketchikan.

USCGC <i>Bailey T. Barco</i> USCGs 22nd cutter and the 2nd to be stationed in Alaska

USCGC Bailey Barco (WPC-1122) is the United States Coast Guard's 22nd Sentinel-class cutter, and the second to be stationed in Alaska, where she was homeported at Coast Guard Base Ketchikan.

USCGC <i>Benjamin B. Dailey</i>

USCGC Benjamin Dailey (WPC-1123) is the United States Coast Guard's 23rd Sentinel-class cutter. She is the first cutter of her class stationed in the Coast Guard's Eight District, with a homeport in Pascagoula, MS.

USCGC <i>Joseph Gerczak</i> American Sentinel-class Coast Guard cutter

USCGC Joseph Gerczak (WPC-1126) is the 26th Sentinel-class cutter built for the United States Coast Guard. She will be the second member of the three members of her class to be homeported in Honolulu, Hawaii.

USCGC <i>Richard Snyder</i>

USCGC Richard Snyder (WPC-1127) is the 27th Sentinel-class cutter built for the United States Coast Guard. She is the first of her class to be home-ported in Atlantic Beach, North Carolina.

USCGC <i>Forrest Rednour</i>

USCGC Forrest Rednour (WPC-1129) is the 29th Sentinel-class cutter built for the United States Coast Guard. She is the first of the four vessels of her class to be home-ported in San Pedro, California. Other sister ships have been based in Florida, Mississippi, Puerto Rico, New Jersey, North Carolina, Hawaii and Alaska. But Forrest Rednour is the first to be homeported on the west coast of the lower 48 states. The vessel will be homeported at a base near Los Angeles' Terminal Island. Three sister ships will join her, at this base.

USCGC <i>Oliver F. Berry</i>

USCGC Oliver Berry (WPC-1124) is the United States Coast Guard's 24th Sentinel-class cutter. She was the first member of the three members of her class to be homeported in Honolulu, Hawaii.

USCGC <i>Robert Ward</i>

USCGC Robert Ward (WPC-1130) is the 30th Sentinel-class cutter, and the second of four assigned to the San Pedro Coast Guard station, adjacent to Los Angeles, California.

USCGC William Sparling (WPC-1154) will be the United States Coast Guard's 54th Sentinel-class cutter.

USCGC <i>Harold Miller</i>

USCGC Harold Miller (WPC-1138) is the United States Coast Guard's 38th Sentinel-class cutter.

USCGC <i>Glen Harris</i>

USCGC Glen Harris (WPC-1144) will be the United States Coast Guard's 44th Sentinel-class cutter.

USCGC <i>Edgar Culbertson</i>

USCGC Edgar Culbertson (WPC-1137) is the United States Coast Guard's 37th Sentinel-class cutter, and the second of three to be homeported in Galveston, Texas.

USCGC <i>Angela McShan</i>

USCGC Angela McShan (WPC-1135) is the United States Coast Guard's 35th Sentinel-class cutter.

USCGC <i>Charles Moulthrope</i> American Coast Guard fast response cutter

USCGC Charles Moulthrope (WPC-1141) is the United States Coast Guard's 41st Sentinel-class cutter, and the first of six to be homeported in Manama, Bahrain.

References

  1. 1 2 "Coast Guard accepts 36th fast response cutter". United States Coast Guard. 2019-11-07. Retrieved 2020-01-15. The Coast Guard accepted delivery of the 36th fast response cutter (FRC), Daniel Tarr, in Key West, Florida, Nov. 7. The cutter will be the first of three planned FRCs stationed in Galveston, Texas.
  2. 1 2 "Coast Guard commissions Cutter Daniel Tarr in Galveston, Texas". Coast Guard News. 2020-01-10. Retrieved 2020-01-15.
  3. 1 2 "Daniel Tarr Coast Guard Cutter Commissioned in Galveston, Texas". Eastern Shore Post . 2020-01-09. Retrieved 2020-01-15. The USCGC Daniel Tarr will be commissioned Jan. 10 in Galveston, Texas, after the Coast Guard accepted delivery of the vessel in Key West, Fla., in November.
  4. ↑ "FRC Plan B: The Sentinel Class". Defense Industry Daily. May 2, 2014. Archived from the original on July 7, 2014. Retrieved 2014-04-03. All of these boats will be named after enlisted Coast Guard heroes, who distinguished themselves in USCG or military service. The first 25 have been named, but only 8 have been commissioned...
  5. ↑ Jacqueline L. Urgo (November 19, 2016). "Coast Guard to get 'game changer' cutter to save lives and catch criminals". Philadelphia Inquirer. Archived from the original on November 20, 2016. Retrieved 2016-11-19. Although the cutter is far from luxurious, its crew quarters provide slightly more room and comfort than earlier models, with larger staterooms, more toilets and sinks, greater storage space, and DirecTV access in the mess areas.
  6. ↑ Susan Schept (March 22, 2010). "Enlisted heroes honored". United States Coast Guard. Archived from the original on December 3, 2011. Retrieved 2013-02-01. After the passing of several well-known Coast Guard heroes last year, Master Chief Petty Officer of the Coast Guard Charles "Skip" Bowen mentioned in his blog that the Coast Guard does not do enough to honor its fallen heroes.
  7. ↑ "U.S. Coast Guard announces name for first Sentinel-class cutter". March 22, 2010. Archived from the original on March 25, 2010. Retrieved 2013-02-01. Previously designated to be named the Coast Guard Cutter Sentinel, the cutter Bernard C. Webber will be the first of the service's new 153-foot patrol cutters. Coast Guard Commandant Admiral Thad Allen approved the change of the cutter's name to allow this class of vessels to be named after outstanding enlisted members who demonstrated exceptional heroism in the line of duty. This will be the first class of cutters to be named exclusively for enlisted members of the Coast Guard and its predecessor services.
  8. ↑ "Coast Guard Aligns Names with Hull Numbers for its Sentinel-class FRCs". Seapower magazine . Washington DC. 2017-12-12. Retrieved 2017-12-09. The U.S. Coast Guard has announced the names and corresponding hull numbers for its next 20 Sentinel-class Fast Response Cutters (FRCs), each vessel being named for a deceased leader, trailblazer or hero of the Coast Guard and its predecessor services of the U.S. Revenue Cutter Service, the U.S. Lifesaving Service and the U.S. Lighthouse Service, according to a Dec. 12 Coast Guard release.
  9. ↑ William H. Thiesen (2018-08-09). "The Long Blue Line: Tulagi's coxswains – the service's 1st Silver Star recipients". Coast Guard Compass . Retrieved 2020-01-09. For landing the Marines’ first wave at Tulagi, the Navy awarded Silver Star Medals to coxswains Tarr, Sparling, Miller and Harris and advanced them in their rating. They were the first enlisted men in the Coast Guard to receive the Silver Star. All four of these heroic coxswains will be honored as Fast Response Cutter namesakes.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.