USCGC Isaac Mayo | |
History | |
---|---|
United States | |
Namesake | Isaac Mayo |
Builder | Bollinger Shipyards, Lockport, Louisiana |
Launched | January 13, 2015 |
Acquired | January 13, 2015 [1] |
Commissioned | March 28, 2015 [2] |
Homeport | Key West, FL |
Identification |
|
Motto | The will to serve, courage to protect |
Status | in active service |
Badge | |
General characteristics | |
Class and type | Sentinel-class cutter |
Displacement | 353 long tons (359 t) |
Length | 46.8 m (154 ft) |
Beam | 8.11 m (26.6 ft) |
Depth | 2.9 m (9.5 ft) |
Propulsion |
|
Speed | 28 knots (52 km/h; 32 mph) |
Endurance |
|
Boats & landing craft carried | 1 × Short Range Prosecutor RHIB |
Complement | 2 officers, 20 crew |
Sensors and processing systems | L-3 C4ISR suite |
Armament |
|
USCGC Isaac Mayo is a Sentinel-class cutter homeported in Key West, Florida. [1] [3] She is the twelfth Sentinel class to be delivered, and the sixth of six to be assigned to Key West.
Like her sister ships, she is equipped for coastal security patrols, interdiction of drug and people smugglers, and search and rescue. Like the smaller Marine Protectorclass she is equipped with a stern launching ramp. [4] The ramp allows the deployment and retrieval of her high speed water-jet powered pursuit boat without first coming to a stop. She is capable of more than 25 knots (46 km/h; 29 mph) and armed with a remote controlled 25 millimetres (0.98 in) M242 Bushmaster autocannon; and four crew-served Browning M2 machine guns.
On April 4, 2016, Isaac Mayo intercepted a small boat with twenty-two Cuban refugees on board. [5] The refugees had gone off course, and had entered Bahamas territory.
She is named after Isaac Mayo, who served a surfman at a lifeboat station on Cape Cod. [3] [6] Mayo was an employee of the United States Life-Saving Service, one of the precursor services that were amalgamated into the Coast Guard.
The Sentinel-class cutter, also known as Fast Response Cutter due to its program name, is part of the United States Coast Guard's Deepwater program. At 154 feet (46.8 m) it is similar to, but larger than the 123-foot (37 m) lengthened 1980s-era Island-class patrol boats that it replaces. Up to 58 vessels are to be built by the Louisiana-based firm Bollinger Shipyards, using a design from the Netherlands-based Damen Group, with the Sentinel design based on the company's Damen Stan 4708 patrol vessel. The Department of Homeland Security's budget proposal to Congress, for the Coast Guard, for 2021, stated that, in addition to 58 vessels to serve the Continental US, they requested an additional six vessels for its portion of Patrol Forces South West Asia.
USCGC Bernard C. Webber (WPC-1101) is the first of the United States Coast Guard's 58 Sentinel-class cutters. Like most of her sister ships, she replaced a 110-foot (34 m) Island-class patrol boat. Bernard C. Webber, and the next five vessels in the class, Richard Etheridge, William Flores, Robert Yered, Margaret Norvell, and Paul Clark, are all based in Miami, Florida.
USCGC Richard Etheridge is the second of the United States Coast Guard's Sentinel-class cutters. Like most of her sister ships she replaced a 110-foot (34 m) Island-class patrol boat. Richard Etheridge was launched in August 2011.
USCGC William Flores (WPC-1103) is a Sentinel-class cutter homeported in Coast Guard District 7, Miami, Florida.
Isaac Mayo was a junior surfman in the United States Life-Saving Service, one of the agencies later amalgamated into the United States Coast Guard in 1915. On April 4, 1879, he led multiple and eventually successful efforts to rescue seamen stranded in an offshore wreck at the height of a violent storm.
USCGC Robert Yered (WPC-1104) is a Sentinel-class cutter based in Miami, Florida. She was launched on November 23, 2012, and was commissioned on February 15, 2012. Debbie Wasserman Schultz, the Congressional Representative for the district containing the vessel's base, met the ship when she arrived in Miami on January 27, 2013.
USCGC Margaret Norvell (WPC-1105) is the fifth Sentinel-class cutter , based at Miami, Florida after commissioning. She was launched on January 13, 2012, and delivered to the Coast Guard on March 21, 2013. She was commissioned on June 1, 2013. She was commissioned at Mardi Gras World in New Orleans, near where her namesake staffed her lighthouse for decades.
USCGC Paul Clark (WPC-1106) is the sixth Sentinel-class cutter. Like the previous five vessels she is homeported in Miami, Florida. She was delivered to the Coast Guard, for testing, on May 18, 2013.
USCGC Charles Sexton (WPC-1108) is the eighth Sentinel-class cutter, and the second to be based in Key West, Florida. She was delivered to the United States Coast Guard for a final evaluation and shakedown on December 10, 2013, and the vessel was commissioned on March 8, 2014.
USCGC Kathleen Moore is the ninth Sentinel-class cutter by Bollinger shipyards delivered to the United States Coast Guard. She was delivered to the Coast Guard, for pre-commissioning testing, on 28 March 2014.
USCGC William Trump (WPC-1111) is a Sentinel-class cutter of the United States Coast Guard. When it was delivered to the Coast Guard, on November 25, 2014, it was the eleventh vessel, of its class, and the fifth vessel based in the Coast Guard's station in Key West, Florida.
USCGC Joseph Napier is a Sentinel-class cutter homeported in San Juan, Puerto Rico. She is the fifteenth Sentinel class to be delivered, and the third of six to be assigned to Puerto Rico. she was commissioned on 29 January 2016.
USCGC Winslow Griesser (WPC-1116) was the sixteenth Sentinel-class cutter to be delivered. She will be the fourth of six Sentinel-class vessels to be stationed in San Juan, Puerto Rico. Bollinger shipyards delivered her to the United States Coast Guard, in Key West, Florida, on December 23, 2015. After she completed her acceptance trials, she was commissioned on March 11, 2016.
Rollin Arnold Fritch was a United States Coast Guard seaman who died at his weapons station while shooting at a Japanese kamikaze, during World War II.
USCGC Rollin Fritch is the US Coast Guard's 19th Sentinel-class cutter, and the first to be homeported outside of the Caribbean. She is based at the Coast Guard Training Center in Cape May, New Jersey.
USCGC Joseph Gerczak (WPC-1126) is the 26th Sentinel-class cutter built for the United States Coast Guard. She is one of three Fast Response Cutters homeported in Honolulu, Hawaii.
USCGC Richard Snyder (WPC-1127) is the 27th Sentinel-class cutter built for the United States Coast Guard. She is the first of her class to be home-ported in Atlantic Beach, North Carolina.
USCGC Daniel Tarr (WPC-1136) is the United States Coast Guard's 36th Sentinel-class cutter, and the first of three to be homeported in Galveston, Texas.
USCGC Harold Miller (WPC-1138) is the United States Coast Guard's 38th Sentinel-class cutter.
USCGC Charles Moulthrope (WPC-1141) is the United States Coast Guard's 41st Sentinel-class cutter, and the first of six to be homeported in Manama, Bahrain.
In March 2015, a Coast Guard cutter named Isaac Mayo was commissioned in Key West, Fla. It was named for a man who had two widely different jobs in two widely different areas: He was a seaman on the Atlantic Ocean and a farmer in North Dakota.
“Early yesterday morning U.S. officials on-board USCG Cutter Isaac Mayo handed over an additional 22 Cuban migrants to Bahamas Immigration officers at the Lucayan Harbour,” informed the local immigration officer.