USCGC Raymond Evans

Last updated
USCGC Raymond Evans (WPC-1110)
Coast-Guard-Cutter-Raymond-Evans.jpg
Raymond Evans, during her sea trials
History
Flag of the United States Coast Guard.svgUnited States
Namesake Raymond Evans (USCG)
Builder Bollinger Shipyards, Lockport, Louisiana
LaunchedJune 25, 2014
AcquiredJune 25, 2014 [1]
CommissionedSeptember 6, 2014 [2]
Identification
MottoWe have a job to do
Statusin active service
Badge USCGC Raymond Evans (WPC 1110) CoA.jpg
General characteristics
Class and type Sentinel-class cutter
Displacement353 long tons (359  t)
Length46.8 m (154 ft)
Beam8.11 m (26.6 ft)
Depth2.9 m (9.5 ft)
Propulsion
  • 2 × 4,300 kW (5,800 shp)
  • 1 × 75 kW (101 shp) bow thruster
Speed28 knots (52 km/h; 32 mph)
Endurance
  • 5 days, 2,500 nmi (4,600 km; 2,900 mi)
  • Designed to be on patrol 2,500 hours per year
Boats & landing
craft carried		1 × Short Range Prosecutor RHIB
Complement4 officers, 20 crew
Sensors and
processing systems		L-3 C4ISR suite
Armament

USCGC Raymond Evans is the tenth vessel in the United States Coast Guard's Sentinel-class cutter. [3] [4] All the vessels are named after members of the Coast Guard, or its precursor services, who are remembered for their heroism. Names had already been assigned for the first fourteen vessels, when Commander Raymond Evans died, and the USCG Commandant announced that the next Sentinel class cutter would be named after him. Joseph Napier, who was originally scheduled to be the namesake of the tenth vessel, had his name moved to the beginning of the second list of heroes names, and will now be the namesake of the fifteenth vessel.

Contents

The vessel was delivered to the Coast Guard, for pre-commissioning trials, on June 25, 2014. [1] [3] [4] On August 20, 2014, an open house was held to allow residents of Key West, Florida to tour the vessel. [5] The vessel was commissioned on September 6, 2014. [2] [6] [7] [8]

Design

The Sentinel-class cutters were designed to replace the shorter 110-foot (34 m) Island-class patrol boats. [9] Raymond Evans is equipped with a remote-control 25 mm Bushmaster autocannon and four, crew-served M2HB .50-caliber machine guns. It has a bow thruster for maneuvering in crowded anchorages and channels. It also has small underwater fins for coping with the rolling and pitching caused by large waves. It is equipped with a stern launching ramp, like the Marine Protector-class and the eight failed expanded Island-class cutters. It has a complement of twenty-two crew members. Like the Marine Protector class, and the cancelled extended Island-class cutters, the Sentinel-class cutters deploy the Short Range Prosecutor Rigid-hulled inflatable (SRP or RHIB) in rescues and interceptions. [10] According to Marine Log , modifications to the Coast Guard vessels from the Stan 4708 design include an increase in speed from 23 to 28 knots (43 to 52 km/h; 26 to 32 mph), fixed-pitch rather than variable-pitch propellers, stern launch capability, and watertight bulkheads. [11]

Raymond Evans has an overall length of 153 feet 6 inches (46.79 m), a beam of 25 feet (7.6 m), and a displacement of 325 long tons (330 t; 364 short tons). Its draft is 9 feet 6 inches (2.90 m) and it has a maximum speed of over 28 knots (52 km/h; 32 mph). The Sentinel-class cutters have endurances of five days and a range of 2,950 nautical miles (3,390 mi; 5,460 km). [9]

Career

In early January, while operating off the coast of Guyana with USCGC Stone (WMSL-758), Raymond Evans boarded a suspected narcotics trafficking vessel. After testing the packages found on board, 970 kilograms of cocaine were recovered and the suspected traffickers were detained. [12]

Related Research Articles

Sentinel-class cutter United States Coast Guard cutter class

The Sentinel-class cutter, also known as Fast Response Cutter due to its program name, is part of the United States Coast Guard's Deepwater program. At 154 feet (46.8 m) it is similar to, but larger than the 123-foot (37 m) lengthened 1980s-era Island-class patrol boats that it replaces. Up to 58 vessels are to be built by the Louisiana-based firm Bollinger Shipyards, using a design from the Netherlands-based Damen Group, with the Sentinel design based on the company's Damen Stan 4708 patrol vessel. The Department of Homeland Security's budget proposal to Congress, for the Coast Guard, for 2021, stated that, in addition to 58 vessels to serve the Continental US, they requested an additional six vessels for its portion of Patrol Forces South West Asia.

USCGC <i>Bernard C. Webber</i>

USCGC Bernard C. Webber (WPC-1101) is the first of the United States Coast Guard's 58 Sentinel-class cutters. Like most of her sister ships, she replaced a 110-foot (34 m) Island-class patrol boat. Bernard C. Webber, and the next five vessels in the class, Richard Etheridge, William Flores, Robert Yered, Margaret Norvell, and Paul Clark, are all based in Miami, Florida.

USCGC <i>Richard Etheridge</i>

USCGC Richard Etheridge is the second of the United States Coast Guard's Sentinel-class cutters. Like most of her sister ships she replaced a 110-foot (34 m) Island-class patrol boat. Richard Etheridge was launched in August 2011.

USCGC <i>Margaret Norvell</i>

USCGC Margaret Norvell (WPC-1105) is the fifth Sentinel-class cutter , based at Miami, Florida after commissioning. She was launched on January 13, 2012, and delivered to the Coast Guard on March 21, 2013. She was commissioned on June 1, 2013. She was commissioned at Mardi Gras World in New Orleans, near where her namesake staffed her lighthouse for decades.

<span class="mw-page-title-main">Kathleen Moore</span>

Kathleen Moore, also known as Catherine Moore, Kathleen A. Moore, Kathleen Andre Moore, Kate Moore, and Catherine A. Moore, was a lighthouse keeper. She was employed by the United States Lighthouse Service, which was a precursor agency to the United States Coast Guard.

USCGC <i>Charles David Jr.</i>

USCGC Charles David Jr is the seventh Sentinel-class cutter. Upon her commissioning she was assigned to serve in Key West, Florida, the first of six vessels to be based there. She was delivered to the Coast Guard, for testing, on August 17, 2013. She was officially commissioned on November 16, 2013.

USCGC <i>Charles Sexton</i>

USCGC Charles Sexton (WPC-1108) is the eighth Sentinel-class cutter, and the second to be based in Key West, Florida. She was delivered to the United States Coast Guard for a final evaluation and shakedown on December 10, 2013, and the vessel was commissioned on March 8, 2014.

USCGC <i>Kathleen Moore</i> United States Coast Guard vessel

USCGC Kathleen Moore is the ninth Sentinel-class cutter by Bollinger shipyards delivered to the United States Coast Guard. She was delivered to the Coast Guard, for pre-commissioning testing, on 28 March 2014.

USCGC <i>Joseph Napier</i>

USCGC Joseph Napier is a Sentinel-class cutter homeported in San Juan, Puerto Rico. She is the fifteenth Sentinel class to be delivered, and the third of six to be assigned to Puerto Rico. she was commissioned on 29 January 2016.

USCGC <i>Winslow W. Griesser</i>

USCGC Winslow Griesser (WPC-1116) was the sixteenth Sentinel-class cutter to be delivered. She will be the fourth of six Sentinel-class vessels to be stationed in San Juan, Puerto Rico. Bollinger shipyards delivered her to the United States Coast Guard, in Key West, Florida, on December 23, 2015. After she completed her acceptance trials, she was commissioned on March 11, 2016.

<span class="mw-page-title-main">Winslow W. Griesser</span>

Winslow W. Griesser (1856–1931) was a station keeper in the United States Life-Saving Service, one of the agencies that were merged to form the United States Coast Guard. In 2016 the Coast Guard honored him by naming one of its new Sentinel-class cutters after him.

USCGC <i>Lawrence O. Lawson</i>

USCGC Lawrence Lawson is the 20th Sentinel-class cutter to be delivered to the United States Coast Guard. She was built at Bollinger Shipyards, in Lockport, Louisiana, and delivered to the Coast Guard, for her sea trials, on October 20, 2016. She was commissioned on March 18, 2017. She is the second cutter of her class to be the homeported at the Coast Guard Training Center in Cape May, New Jersey, and also the second to be stationed outside of the Caribbean.

USCGC <i>Rollin A. Fritch</i>

USCGC Rollin Fritch is the US Coast Guard's 19th Sentinel-class cutter, and the first to be homeported outside of the Caribbean. She is based at the Coast Guard Training Center in Cape May, New Jersey.

USCGC <i>John F. McCormick</i> Sentinel-class cutter of the United States Coast Guard

USCGC John McCormick (WPC-1121) is the United States Coast Guard's 21st Sentinel-class cutter, and the first to be stationed in Alaska, where homeported at Coast Guard Base Ketchikan.

USCGC <i>Bailey T. Barco</i> USCGs 22nd cutter and the 2nd to be stationed in Alaska

USCGC Bailey Barco (WPC-1122) is the United States Coast Guard's 22nd Sentinel-class cutter, and the second to be stationed in Alaska, where she was homeported at Coast Guard Base Ketchikan.

USCGC <i>Benjamin B. Dailey</i>

USCGC Benjamin Dailey (WPC-1123) was the United States Coast Guard's 23rd Sentinel-class cutter. She was the first cutter of her class stationed in the Coast Guard's Eight District, with a homeport in Pascagoula, Mississippi.

USCGC <i>Joseph Gerczak</i> American Sentinel-class Coast Guard cutter

USCGC Joseph Gerczak (WPC-1126) is the 26th Sentinel-class cutter built for the United States Coast Guard. She is one of three Fast Response Cutters homeported in Honolulu, Hawaii.

Coast Guard Station Key West is the most southerly Coast Guard Station in Florida and the fairest of them all.

USCGC William Sparling (WPC-1154) will be the United States Coast Guard's 54th Sentinel-class cutter.

USCGC <i>Harold Miller</i>

USCGC Harold Miller (WPC-1138) is the United States Coast Guard's 38th Sentinel-class cutter.

References

  1. 1 2 "Acquisition Update: Tenth Fast Response Cutter Delivered to the Coast Guard" (Press release). United States Coast Guard. 2014-06-26. Retrieved 2014-06-26.
  2. 1 2 "Coast Guard commissions 10th fast response cutter". Coast Guard News. 2014-09-06. Retrieved 2014-09-06.
  3. 1 2 "Bollinger delivers the CGC Raymond Evans the tenth fast response cutter to the USCG". Lockport, Louisiana: Bollinger shipyards. 2014-06-25. Archived from the original on 2014-08-20. Bollinger Shipyards, Inc. has delivered the RAYMOND EVANS, the tenth Fast Response Cutter (FRC) to the United States Coast Guard.
  4. 1 2 "Bollinger Delivers 10th Coast Guard FRC". Maritime Executive. 2014-06-25. Archived from the original on 2014-06-26. Retrieved 2014-06-25. The Coast Guard took delivery on June 25, 2014 in Key West, Florida and is scheduled to commission the vessel in Key West, Florida during September, 2014.
  5. ↑ Adam Linhardt (2014-08-18). "Coast Guard: Free tours of new cutter". Key West, Florida: Florida Keys News. Archived from the original on 2014-08-20. The Coast Guard will offer free tours from 10 a.m. to 2 p.m. today and on Monday of its newest Sentinel class Fast Response Cutter. the Raymond Evans -- named after the late Coast Guard Cmdr. Raymond J. Evans -- is the fourth FRC to arrive in the Southernmost City.
  6. ↑ "KEY WEST NAVY LEAGUE COMMISSIONING COMMITTEE welcomes you". Key West Navy League. Archived from the original on 2014-08-21. Retrieved 2014-08-20. Be a SPONSOR of the commissioning and be part of the excitement as our local Coast Guard Sector builds the newest local fleet! Next Commissioning is September 6, 2014 for CGC RAYMOND EVANS (WPC-1110).
  7. ↑ Nancy Klingener (2014-08-26). "New Coast Guard Ship Honors WWII Hero In Key West". WLRN. Archived from the original on 2014-08-27. Retrieved 2014-08-27. A World War II hero will be honored when the Coast Guard's newest cutter is commissioned into service in Key West on Sept. 6.
  8. ↑ Adam Linhardt (2014-09-06). "Newest Key West cutter enters service". Key West, Florida: Key West Citizen. Archived from the original on 2014-11-27. Coast Guard Sector Key West officially becomes home today for the 154-foot Cutter Raymond J. Evans. The Raymond J. Evans will be commissioned as it becomes the fourth of six new Fast Response Cutters that will be stationed in the Southernmost City.
  9. 1 2 "Fast Response Cutter" (PDF). United States Coast Guard. Retrieved 24 August 2015.
  10. ↑ "Short Range Prosecutor (SRP)". Integrated Deepwater System Program . Retrieved 2007-09-01.
  11. ↑ "Bollinger awarded potential $1.5 billion FRC contract". Marine Log. 2009-09-26. Archived from the original on 2010-01-04.
  12. ↑ "On Maiden Voyage, USCGC Stone Crew Interdict Narcotics in Caribbean". U.S. Southern Command. Retrieved 2021-03-19.


This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.