USCGC Joseph Tezanos

Last updated

US Coast Guard Cutter Joseph Tezanos crew mans the rail during the commissioning ceremony.jpg
US Coast Guard Cutter Joseph Tezanos' crew mans the rail during the commissioning ceremony.
History
Flag of the United States Coast Guard.svgUnited States
NameJoseph Tezanos
Namesake Joseph Tezanos
Operator United States Coast Guard
Builder Bollinger Shipyards, Lockport, Louisiana
AcquiredJune 22, 2016
CommissionedAugust 26, 2016
Homeport San Juan, Puerto Rico
Identification Hull number: WPC-1118
StatusIn active service
General characteristics
Class and type Sentinel-class cutter
Displacement353 long tons (359  t)
Length46.8 m (154 ft)
Beam8.11 m (26.6 ft)
Depth2.9 m (9.5 ft)
Propulsion
  • 2 × 4,300 kW (5,800 shp)
  • 1 × 75 kW (101 shp) bow thruster
Speed28 knots (52 km/h; 32 mph)
Range2,500 nautical miles (4,600 km; 2,900 mi)
Endurance5 days
Boats & landing
craft carried		1 × Cutter Boat - Over the Horizon Interceptor
Complement4 officers, 20 crew
Sensors and
processing systems		L-3 C4ISR suite
Armament

USCGC Joseph Tezanos (WPC-1118) is the United States Coast Guard's 18th Sentinel-class cutter. She was commissioned on August 26, 2016. She was the sixth of the first cohort of six Fast Response Cutters home-ported in San Juan, Puerto Rico. [1] [2]

Contents

Design

Like her sister ships, Joseph Tezanos is designed to perform search and rescue missions, port security, and the interception of smugglers. [1] She is armed with a remotely-controlled, gyro-stabilized 25 mm autocannon, four crew served M2 Browning machine guns, and light arms. She is equipped with a stern launching ramp, that allows her to launch or retrieve a water-jet propelled high-speed auxiliary boat, without first coming to a stop. Her high-speed boat has over-the-horizon capability, and is useful for inspecting other vessels, and deploying boarding parties.

Operational career

Just days before being commissioned into active service, Joseph Tezanos was the on-scene coordinator for the rescue of the burning cruise ferry Caribbean Fantasy [3] several miles outside of San Juan harbor. Leading a flotilla of federal, territorial, commercial, and Good Samaritan vessels, the plankowner crew of Joseph Tezanos saved all 511 crewmembers and passengers from Caribbean Fantasy. This was the largest mass rescue in US waters since the Andrea Doria. [4]

In late March 2019, Joseph Tezanos seized a large shipment of illegal drugs from a 30 feet (9.1 m) "go-fast" vessel off Loiza, Puerto Rico. [5] [6] Three smugglers from the Dominican Republic were seized, together with $25 million worth of cocaine, and 2 tons of marijuana, worth an additional $3.5 million.

Namesake

In 2010, Charles "Skip" W. Bowen, who was then the United States Coast Guard's most senior non-commissioned officer, proposed that all 58 cutters in the Sentinel class should be named after enlisted sailors in the Coast Guard, or one of its precursor services, who were recognized for their heroism. [7] [8] The Coast Guard chose Joseph Tezanos as the namesake of the 18th cutter. Tezanos enlisted in the Coast Guard after the breakout of World War II, in 1942. [9] He served as a gunner's mate aboard the Landing Ship Tank LST 20 where landings included Kiska, Alaska, Tarawa Atoll, and Kwajalein Atoll. In April 1944, while moored in Pearl Harbor the LST 20 was near a cataclysmic explosion among vessels loaded with ammunition that posed a grave risk of setting off the explosives in other vessels. Tezanos led a crew of volunteers that took a boat dangerously close to the conflagration, and rescued over forty survivors.

Related Research Articles

Sentinel-class cutter United States Coast Guard cutter class

The Sentinel-class cutter, also known as the Fast Response Cutter due to its program name, is part of the United States Coast Guard's Deepwater program. At 154 feet (46.8 m), it is similar to, but larger than, the 123-foot (37 m) lengthened 1980s-era Island-class patrol boats that it replaces. Up to 58 vessels are to be built by the Louisiana-based firm Bollinger Shipyards, using a design from the Netherlands-based Damen Group, with the Sentinel design based on the company's Damen Stan 4708 patrol vessel. The Department of Homeland Security's budget proposal to Congress, for the Coast Guard, for 2021, stated that, in addition to 58 vessels to serve the Continental US, they requested an additional six vessels for its portion of Patrol Forces Southwest Asia.

SLNS <i>Samudura</i> (P261) United States Coast Guard medium endurance cutter

SLNS Samudura (P621) is a Sri Lanka Navy Offshore Patrol Vessel. Originally commissioned by the United States Coast Guard in 1968 as the medium endurance cutter USCGC Courageous, she was donated to Sri Lanka in 2004 and commissioned on February 19, 2005.

USCGC <i>Bernard C. Webber</i>

USCGC Bernard C. Webber (WPC-1101) is the first of the United States Coast Guard's 58 Sentinel-class cutters. Like most of her sister ships, she replaced a 110-foot (34 m) Island-class patrol boat. Bernard C. Webber, and the next five vessels in the class, Richard Etheridge, William Flores, Robert Yered, Margaret Norvell, and Paul Clark, are all based in Miami, Florida.

USCGC <i>Margaret Norvell</i>

USCGC Margaret Norvell (WPC-1105) is the fifth Sentinel-class cutter, based at Miami, Florida. She was launched on January 13, 2012, and delivered to the Coast Guard on March 21, 2013. She was commissioned on June 1, 2013. She was commissioned at Mardi Gras World in New Orleans, near where her namesake, Margaret Norvell, staffed a lighthouse for decades.

<span class="mw-page-title-main">Joseph Napier (USCG)</span>

Joseph Napier, a station keeper for the United States Life-Saving Service founded the lifesaving station at St. Joseph, Michigan in 1876. He operated the station for many years and was credited with many dangerous and heroic rescues.

USCGC <i>Heriberto Hernandez</i> Sentinel-class cutter

USCGC Heriberto Hernandez is the 14th Sentinel-class cutter delivered to the United States Coast Guard. Like five of her sister ships, her initial assignment will see her based in San Juan, Puerto Rico.

USCGC <i>Joseph Napier</i>

USCGC Joseph Napier is a Sentinel-class cutter homeported in San Juan, Puerto Rico. She is the fifteenth Sentinel class to be delivered, and the third of six to be assigned to Puerto Rico. she was commissioned on 29 January 2016.

USCGC <i>Winslow Griesser</i>

USCGC Winslow Griesser (WPC-1116) was the sixteenth Sentinel-class cutter to be delivered. She is the fourth of six Sentinel-class vessels to be stationed in San Juan, Puerto Rico. Bollinger shipyards delivered her to the United States Coast Guard, in Key West, Florida, on December 23, 2015. After she completed her acceptance trials, she was commissioned on March 11, 2016.

USCGC <i>Richard Dixon</i>

USCGC Richard Dixon is the United States Coast Guard's thirteenth Sentinel-class cutter, commissioned in Tampa, Florida, on June 20, 2015. She arrived in her home port of San Juan, Puerto Rico on June 24, 2015.

<span class="mw-page-title-main">Winslow W. Griesser</span> US life-saving station keeper (1856–1931)

Winslow W. Griesser (1856–1931) was a station keeper in the United States Life-Saving Service, one of the agencies that were merged to form the United States Coast Guard. In 2016 the Coast Guard honored him by naming one of its new Sentinel-class cutters, USCGC Winslow W. Griesser, after him.

USCGC <i>Donald Horsley</i>

USCGC Donald Horsley (WPC-1117) is the United States Coast Guard's 17th Sentinel-class cutter. She was commissioned on May 20, 2016. She was the fifth of a cohort of six FRCs home-ported in San Juan, Puerto Rico.

USCGC <i>Rollin Fritch</i>

USCGC Rollin Fritch is the US Coast Guard's 19th Sentinel-class cutter, and the first to be homeported outside of the Caribbean. She is based at the Coast Guard Training Center in Cape May, New Jersey.

USCGC <i>Joseph Gerczak</i> American Sentinel-class Coast Guard cutter

USCGC Joseph Gerczak (WPC-1126) is the 26th Sentinel-class cutter built for the United States Coast Guard. She is one of three Fast Response Cutters homeported in Honolulu, Hawaii.

USCGC <i>Forrest Rednour</i>

USCGC Forrest Rednour (WPC-1129) is the 29th Sentinel-class cutter built for the United States Coast Guard. She is the first of the four vessels of her class to be home-ported in San Pedro, California. Other sister ships have been based in Florida, Mississippi, Puerto Rico, New Jersey, North Carolina, Hawaii and Alaska. But Forrest Rednour is the first to be homeported on the west coast of the lower 48 states. The vessel will be homeported at a base near Los Angeles' Terminal Island. Three sister ships will join her, at this base.

USCGC <i>Robert Ward</i>

USCGC Robert Ward (WPC-1130) is the 30th Sentinel-class cutter, and the second of four assigned to the U.S. Coast Guard Base Los Angeles / Long Beach, in Los Angeles, California.

USCGC <i>Joseph Doyle</i>

USCGC Joseph Doyle (WPC-1133) is the United States Coast Guard's 33rd Sentinel-class cutter. Upon completion, she was transferred to the Coast Guard in Key West for her acceptance trials on March 21, 2019. She was commissioned on June 8, 2019, and is the first of a second cohort of cutters commissioned in San Juan, Puerto Rico. The first batch of six cutters were commissioned there in 2015 and 2016.

USCGC <i>Daniel Tarr</i>

USCGC Daniel Tarr (WPC-1136) is the United States Coast Guard's 36th Sentinel-class cutter, and the first of three to be homeported in Galveston, Texas.

USCGC <i>Glen Harris</i>

USCGC Glen Harris (WPC-1144) will be the United States Coast Guard's 44th Sentinel-class cutter.

USCGC <i>Charles Moulthrope</i> American Coast Guard fast response cutter

USCGC Charles Moulthrope (WPC-1141) is the United States Coast Guard's 41st Sentinel-class cutter, and the first of six to be homeported in Manama, Bahrain.

USCGC <i>Reef Shark</i> U. S. Coast Guard patrol boat

USCGC Reef Shark is the 69th Marine Protector-class coastal patrol boat to be built. Her home port is Juneau, Alaska, where she is moored in Auke Bay.

References

  1. 1 2 "FRC Plan B: The Sentinel Class". Defense Industry Daily. May 2, 2014. Archived from the original on July 7, 2014. Retrieved April 3, 2014. All of these boats will be named after enlisted Coast Guard heroes, who distinguished themselves in USCG or military service. The first 25 have been named, but only 8 have been commissioned...
  2. ↑ "Coast Guard commissions U.S. Coast Guard Cutter Joseph Tezanos in San Juan, Puerto Rico". Coast Guard News. August 26, 2016. Archived from the original on August 28, 2016. Retrieved August 26, 2016.
  3. ↑ "Coast Guard commissions U.S. Coast Guard Cutter Joseph Tezanos in San Juan | Coast Guard News". coastguardnews.com. Retrieved February 8, 2021.
  4. ↑ Andrews, Evan. "The Sinking of Andrea Doria". HISTORY. Retrieved February 8, 2021.
  5. ↑ "US Coast Guard seizes ganja worth over US$3.5m, nabs six suspects in Caribbean". Jamaica Observer . Miami. March 30, 2019. Archived from the original on March 31, 2019. Retrieved March 31, 2019. The United Coast Guard says it seized nearly 2,000 pounds of marijuana with a street value of more than US$3.5 million during an exercise in the Caribbean Sea. It said six smugglers had been detained.
  6. ↑ "US Coast Guard seizes millions in marijuana, nabs six drug suspects in Caribbean Sea". Jamaica Observer . Miami. March 31, 2019. Archived from the original on March 31, 2019. Retrieved March 31, 2019. Last weekend, the crew of the cutter Joseph Tezanos (WPC-1118) offloaded 2,513 pounds of cocaine and transferred custody of three suspected smugglers to the US Drug Enforcement Administration (DEA) Special Agents in San Juan, Puerto Rico.
  7. ↑ Susan Schept (March 22, 2010). "Enlisted heroes honored". United States Coast Guard. Archived from the original on December 3, 2011. Retrieved February 1, 2013. After the passing of several well-known Coast Guard heroes last year, Master Chief Petty Officer of the Coast Guard Charles "Skip" Bowen mentioned in his blog that the Coast Guard does not do enough to honor its fallen heroes.
  8. ↑ "U.S. Coast Guard announces name for first Sentinel-class cutter". March 22, 2010. Archived from the original on March 25, 2010. Retrieved February 1, 2013. Previously designated to be named the Coast Guard Cutter Sentinel, the cutter Bernard C. Webber will be the first of the service's new 153-foot patrol cutters. Coast Guard Commandant Admiral Thad Allen approved the change of the cutter's name to allow this class of vessels to be named after outstanding enlisted members who demonstrated exceptional heroism in the line of duty. This will be the first class of cutters to be named exclusively for enlisted members of the Coast Guard and its predecessor services.
  9. ↑ Stephanie Young, William H. Thiesen (January 16, 2014). "Coast Guard Heroes: Joseph Tezanos". USCG. Archived from the original on September 14, 2014. Retrieved September 13, 2014.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.