USCGC Burton Island

Last updated

USCGC Burton Island.jpg
USCGC Burton Island (WAGB-283)
History
US flag 48 stars.svgUnited States
NameUSS Burton Island (AG-88)
NamesakeAn island off the coast of Delaware
Builder Western Pipe and Steel Company (WPS), San Pedro, California
Cost US$9.880,037.00
Laid down15 March 1946
Launched30 April 1946
Christened1946
Completed1946
Commissioned28 December 1946
Decommissioned15 December 1966
Maiden voyage17 January 1947
In service8 December 1946
Out of service15 December 1966
Stricken1966
Identification
Nickname(s)B.I.
FateTransferred to U.S. Coast Guard
Flag of the United States.svgFlag of the United States Coast Guard.svgUnited States
NameUSCGC Burton Island (WAGB-283)
Recommissioned15 December 1966
Decommissioned9 May 1978
Homeport
  • Long Beach, California (1966)
  • Government Island, Alameda, California (1977)
Identification Call sign: NEVK
Nickname(s)
  • Hurtin' Burton
  • B.I.
  • White Antarctic Garbage Barge
FateSold for scrap, 17 August 1980
General characteristics
Class and type Wind-class icebreaker
Displacement6,515 tons (1945)
Length269 ft (82 m)
Beam63 ft 6 in (19.35 m)
Draft25 ft 9 in (7.85 m)
Installed power6 × Fairbanks-Morse 8-1/8OP 10-cylinder opposed-piston engines (6 × 2,000 hp)
Propulsion
  • Diesel-electric
  • 2 × Westinghouse Electric DC electric motors driving aft propellers
  • 1 × 3,000 shp (2,200 kW) Westinghouse DC electric motor driving the detachable and seldom-used bow propeller
Speed13.4 knots (24.8 km/h; 15.4 mph)
Range32,485 mi (52,280 km)
Endurance
  • 13.4 knots (24.8 km/h; 15.4 mph) (maximum)
  • 11.6 knots (21.5 km/h; 13.3 mph) (economic)
Boats & landing
craft carried
4 lifeboats. 1 LCVP. 1 Greenland Cruiser, later Arctic Survey Boat (ASB)
Complement219 officers and men
Sensors and
processing systems
  • Electronics: Radar SPS-10B; SPS-53A; SPS-6C (1967)<
  • Sonar
Armament
Aircraft carried2 single rotor helicopters and air detachment personnel
Aviation facilitiesFlight deck and retractable hangar with aircraft service capabilities

USS Burton Island (AG-88) was a United States Navy Wind-class icebreaker that was later recommissioned in the United States Coast Guard as the USCGC Burton Island (WAGB-283). She was named after an island near the coast of Delaware.

Contents

Construction

Burton Island was one of the icebreakers designed by Lt Cdr Edward Thiele and Gibbs & Cox of New York, who modeled them after plans for European icebreakers he obtained before the start of World War II. She was the sixth of seven completed ships of the Wind-class of icebreakers operated by the United States Coast Guard. Her keel was laid on 15 March 1946 at Western Pipe and Steel Company shipyards in San Pedro, California, she was launched on 30 April 1946, and commissioned on 28 December 1946 with Commander Gerald L. Ketchum in command. [1] [2] [3]

Wind-class icebreakers had hulls of unprecedented strength and structural integrity, with a relatively short length in proportion to the great power developed, a cut away forefoot, rounded bottom, and fore, aft and side heeling tanks. Diesel electric machinery was chosen for its controllability and resistance to damage. [4] Burton Island was built during peacetime, so she had a much lighter armament than her war-built sisters, one 5 in (130 mm) 38 cal. deck gun and three quad-mounted Bofors 40 mm anti-aircraft autocannons when in Navy service, and unarmed for the Coast Guard. [3] [5]

Ship's history

U.S. Navy, 1947–1966

On 17 January 1947, Burton Island, loaded with supplies, steamed from San Diego to the Ross Sea, Antarctica where she met with units of TF 68 on the first Antarctica Development project, Operation Highjump. After returning from Antarctica, Burton Island departed 25 July 1947 for the Point Barrow expedition to Alaska.

From April 1948 to December 1956, Burton Island participated in 19 Arctic and Alaskan cruises, including Operation Windmill. During Operation Windmill in the Antarctic, Burton Island was the flagship of Gerald L. Ketchum, commander of Task Force 39. Duties on the cruises varied including, supply activities, helicopter reconnaissance of ice flows, scientific surveys, underwater demolition surveys, and convoy exercises.

In March 1949, Burton Island was redesignated AGB-1.

In February 1958, Burton Island assisted Sōya , which had become iced in near Antarctica carrying a replacement crew of Japanese geophysical researchers. A helicopter carried out the original crew, stranded at the Japanese base at Showa Station, but was forced to leave 15 dogs behind, including Taro and Jiro, who survived an Antarctic winter without human accompaniment.

One prominent excursion was with the submarines USS Seadragon (SSN-584) and USS Skate (SSN-578) in 1962, in which torpedoes were tested underneath the polar ice pack after the two submarines had rendezvoused at the North Pole. [6]

Burton Island, Atka (AGB-3), and Glacier (AGB-4) pushing an iceberg out of the channel in the "Silent Land" near McMurdo Station, Antarctica, 29 December 1965. Burton Island, Atka, and Glacier push iceberg in McMurdo Sound (827218l).jpg
Burton Island, Atka (AGB-3), and Glacier (AGB-4) pushing an iceberg out of the channel in the "Silent Land" near McMurdo Station, Antarctica, 29 December 1965.

US Coast Guard, 1966–1978

On 15 December 1966, the U.S. Navy transferred the vessel, along with all of its icebreakers, to the United States Coast Guard and it was renumbered WAGB-283. After its transfer, Burton Island was stationed at Long Beach, California and used for icebreaking operations. Starting in 1967 through 1978, Burton Island went on eight different Deep Freeze operations to the Antarctic. In the operations, Burton Island was responsible for creating and maintaining aids to navigation, clearing channels through the ice for supply vessels, laying cables, delivering and dispatching the U.S. Mail at remote stations and vessels, search and rescue, fisheries patrol, law enforcement, and giving dental and medical treatment at remote Native Alaskan communities. In addition to Deep Freeze operations, Burton Island served as a floating platform for scientific surveys and research around Alaska and other isolated polar areas. Burton Island also conducted numerous search and rescue missions.

From October 1967 to April 1968 she participated in Operation Deep Freeze 1968. From October 1968 to April 1969 she participated in Operation Deep Freeze 1969. From November 1969 to April 1970 she participated in Operation Deep Freeze 1970 and her accompanying icebreaker USCGC Edisto (WAGB-284) was disabled. From November 1970 to April 1971 she participated in Operation Deep Freeze 1971 and again her accompanying icebreaker USCGC Staten Island (WAGB-278) was disabled. From August to September 1971 she conducted an oceanographic survey along the Alaska North Slope. From February to March 1972 she conducted a scientific survey in Cook Inlet, Alaska. From November 1972 to April 1973 she participated in Operation Deep Freeze 1973. From June to July 1973 she conducted oceanographic research in Alaskan waters. From November 1974 to April 1975 she participated in Operation Deep Freeze 1975. From 13 November 1975 to 26 February 1976 she participated in Operation Deep Freeze 1976. From July to September 1976 she deployed to the Arctic. From 9 November 1976 to 7 April 1977 she participated in Operation Deep Freeze 1977. During that deployment in December 1976, she carried out numerous search-and-rescue missions at Wellington, New Zealand, following a torrential downpour. From 9 July 1977 to 8 September 1977 she undertook a cruise to the Arctic Ocean, during which time her crew constructed several radar navigation towers along the north coast of Alaska and conducted gravity surveys of the Arctic Ocean. From 20 November 1977 to 1 April 1978 she participated in Operation Deep Freeze 1978. From mid-1977 to 9 May 1978 she was stationed at Naval Supply Center Oakland in Oakland, California and used for icebreaking.

Decommissioning and sale

She was decommissioned on 9 May 1978. An excerpt from a Maritime Administration letter dated 21 November 1995 indicates her ultimate fate:

The Maritime Administration sold the vessel by auction under PD-X-1033 dtd. 17 August 1980. The vessel was awarded to Levin Metals Corporation, San Jose, California [7] on 7 October 1980, under contract No. MA-9868 for $261,000.00 The "Burton Island" was scrapped as of 28 April 1982.

Notes

  1. "USCG Burton Island". U.S. Coast Guard Cutter History. United States Coast Guard. Archived from the original on 4 October 2012. Retrieved 12 December 2012.
  2. "USN Burton Island". Dictionary of American Naval Fighting Ships. United States Navy. Archived from the original on 3 November 2012. Retrieved 12 December 2012.
  3. 1 2 "NavSource Burton Island". Service Ship Photo Archive. NavSource Naval History. Archived from the original on 10 September 2013. Retrieved 12 December 2012.
  4. "USCG Icebreakers". U.S. Coast Guard Cutter History. United States Coast Guard. Archived from the original on 1 July 2015. Retrieved 12 December 2012.
  5. "Burton Island 1966". U.S. Coast Guard Cutter History. United States Coast Guard. Archived from the original on 4 October 2012. Retrieved 12 December 2012.
  6. Tales of a Cold War Submariner Archived 1 May 2014 at the Wayback Machine by Dan Summitt, 2004.
  7. Levin Metals Corporation, 1800 Monterey Highway, San Jose, California 95112

Related Research Articles

USCGC <i>Healy</i> Icebreaker of the US Coast Guard

USCGC Healy (WAGB-20) is the United States' largest and most technologically advanced icebreaker as well as the US Coast Guard's largest vessel. She is classified as a medium icebreaker by the Coast Guard. She is homeported in Seattle, Washington, and was commissioned in 1999. On 6 September 2001 Healy visited the North Pole for the first time. The second visit occurred on 12 September 2005. On 5 September 2015, Healy became the first unaccompanied United States surface vessel to reach the North Pole, and Healy's fourth Pole visit happened on 30 September 2022.

USCGC <i>Polar Star</i> United States Coast Guard heavy icebreaker ship

USCGC Polar Star (WAGB-10) is a United States Coast Guard heavy icebreaker. Commissioned in 1976, the ship was built by Lockheed Shipbuilding and Construction Company of Seattle, Washington along with sister ship, USCGC Polar Sea.

USCGC <i>Polar Sea</i> United States Coast Guard heavy icebreaker ship

USCGC Polar Sea (WAGB-11) is a United States Coast Guard heavy icebreaker. Commissioned on 23 February 1977, the ship was built by Lockheed Shipbuilding and Construction Company of Seattle along with her sister ship, Polar Star (WAGB-10). Her home port is Seattle, Washington.

Polar-class icebreaker

Polar-class icebreakersUSCGC Polar Star (WAGB-10), USCGC Polar Sea (WAGB-11) are heavy icebreakers operated by the United States Coast Guard (USCG). These cutters, specifically designed for icebreaking, have reinforced hulls, special icebreaking bows, and a system that allows rapid shifting of ballast to increase the effectiveness of their icebreaking. The vessels conduct Arctic and Antarctic research and are the primary icebreakers that clear the channel into McMurdo Station for supply ships. All are homeported in Seattle, Washington.

USCGC <i>Storis</i>

USCGC Storis (WAGL-38/WAG-38/WAGB-38/WMEC-38) was a light icebreaker and medium endurance cutter which served in the United States Coast Guard for 64 years and 5 months, making her the oldest vessel in commission with the Coast Guard fleet at the time of her decommissioning.

USCGC <i>Mackinaw</i> (WAGB-83) Former Coast Guard icebreaker, now a museum ship

USCGC Mackinaw (WAGB-83) is a 290-foot (88 m) former Coast Guard icebreaker on exhibit as a museum ship at the Icebreaker Mackinaw Maritime Museum in Mackinaw City, Michigan. The vessel has been known as the "Queen of the Great Lakes"; the site states that "she was built during World War II to meet the heavy demands of war materials and transportation during the winter months".

USCGC <i>Edisto</i>

USS Edisto (AGB-2) was a Wind-class icebreaker in the service of the United States Navy and was later transferred to the United States Coast Guard as USCGC Edisto (WAGB-284). She was named after Edisto Island, South Carolina. The island is named after the Native American Edisto Band who inhabited the island and the surrounding area. As of 2011 there is a namesake cutter USCGC Edisto (WPB-1313). The newer Edisto is a 110-foot Island-class patrol boat and is stationed in San Diego County, California.

USS <i>Glacier</i> (AGB-4) United States Navy/Coast Guard Glacier-class icebreaker

USS Glacier (AGB-4) was a U.S. Navy, then U.S. Coast Guard icebreaker which served in the first through fifteenth Operation Deep Freeze expeditions. Glacier was the first icebreaker to make her way through the frozen Bellingshausen Sea, and most of the topography in the area is named for her crew members. When built, Glacier had the largest capacity single armature DC motors ever installed on a ship. Glacier was capable of breaking ice up to 20 feet (6.1 m) thick, and of continuous breaking of 4-foot (1.2 m) thick ice at 3 knots.

USCGC <i>Bramble</i>

USCGC Bramble (WLB-392) is one of the 39 original 180-foot (55 m) seagoing buoy tenders built between 1942 and 1944 for the United States Coast Guard. In commission from 1944 until 2003 she saw service in Pacific, Caribbean and Atlantic waters as well as the Great Lakes. In 1947 Bramble was present at the Nuclear testing at Bikini Atoll and in 1957 a circumnavigation of North America involved a forced traverse of the Northwest Passage. After decommissioning in 2003 Bramble became a museum ship in Port Huron, Michigan. In 2018 she was sold to a private owner, who is preparing MV Bramble to repeat her historic 1957 circumnavigation of North America.

USS <i>Bear</i> Dual steam-powered and sailing ship

USS Bear was a dual steam-powered and sailing ship built with six-inch (15.2 cm)-thick sides which had a long life in various cold-water and ice-filled environments. She was a forerunner of modern icebreakers and had a diverse service life. According to the United States Coast Guard official website, Bear is described as "probably the most famous ship in the history of the Coast Guard."

USCGC <i>Northwind</i> (WAGB-282)

USCGC Northwind (WAG/WAGB-282) was a Wind-class icebreaker, the second United States Coast Guard Cutter of her class to bear the name. She was built to replace USCGC Staten Island which was in Soviet lend-lease service.

USCGC <i>Spar</i> (WLB-206)

USCGC Spar (WLB-206) is a United States Coast Guard Juniper-class seagoing buoy tender home-ported in Duluth, Minnesota. The ship maintains aids to navigation in the Twin Ports and Great Lakes.

Wind-class icebreaker Class of icebreaker ships

The Wind-class icebreakers were a line of diesel electric-powered icebreakers in service with the United States Navy, United States Coast Guard, Royal Canadian Navy, Canadian Coast Guard and Soviet Navy from 1944 through the late 1970s. They were very effective ships: all except Eastwind served at least thirty years, and Northwind served in the USCG continuously for forty-four years. Considered the most technologically advanced icebreakers in the world when first built, the Wind-class icebreakers were also heavily armed; the first operator of the class was the United States Coast Guard, which used the vessels for much-needed coastal patrol off Greenland during World War II. Three of the vessels of the class, Westwind, Southwind, and the first Northwind all went on to serve temporarily for the Soviet Union under the Lend-Lease program, while two others were built for the United States Navy and another was built for the Royal Canadian Navy; all eight vessels were eventually transferred to the United States Coast Guard and the Canadian Coast Guard.

<span class="mw-page-title-main">United States Coast Guard Cutter</span> Commissioned vessel of the U.S. Coast Guard

United States Coast Guard Cutter is the term used by the U.S. Coast Guard for its commissioned vessels. They are 65 feet (19.8 m) or greater in length and have a permanently assigned crew with accommodations aboard. They carry the ship prefix USCGC.

USCGC <i>Eastwind</i>

USCGC Eastwind (WAGB-279) was a Wind-class icebreaker that was built for the United States Coast Guard. Completed in time to see action in World War II, she continued in USCG service under the same name until decommissioned in 1968.

USCGC <i>Westwind</i>

USCGC Westwind (WAGB-281) was a Wind-class icebreaker that served in the United States Coast Guard as USCGC Westwind (WAG-281), the Soviet Navy as the Severni Polius, and again in the U.S. Coast Guard as USCGC Westwind (WAGB-281).

USCGC <i>Staten Island</i>

USCGC Staten Island (WAGB-278) was a United States Coast Guard Wind-class icebreaker. Laid down on 9 June 1942 and launched on 28 December 1942, the ship was commissioned on 26 February 1944, and almost immediately afterward transferred to the Soviet Union, under the Lend Lease program, under the name Severny Veter, which loosely translates as Northwind, until 19 December 1951. When returned to the United States Navy, she was designated USS Northwind until 15 April 1952, when she was renamed Staten Island to distinguish her from her successor USCGC Northwind (WAGB-282) which had been laid down shortly after she was lent to the Soviet Union. The ship was transferred to the U.S. Coast Guard as USCGC Staten Island in February 1965, and served until November 1974, before being scrapped.

USCGC <i>Sycamore</i> (WLB-209)

USCGC Sycamore (WLB-209) is a United States Coast Guard seagoing buoy tender, the second of her name and the ninth of the Juniper-class. She is now home-ported in Newport, Rhode Island, following a one year long Midlife Maintenance Availability (MMA) in Baltimore, Maryland. She was originally home-ported in Cordova, Alaska. Sycamore primarily tends to aids-to-navigation (ATON) in Martha's Vineyard, the Long Island Sound, Hudson River, and New York City Harbor and entrances; however she is also responsible for maintenance support of National Data Buoy Center's offshore weather buoys. In addition to her primary ATON role, Sycamore also performs other duties, such as, marine environmental protection, maritime law enforcement, domestic icebreaking, search and rescue, and homeland security missions.

USCGC <i>Southwind</i>

USCGC Southwind (WAGB-280) was a Wind-class icebreaker that served in the United States Coast Guard as USCGC Southwind (WAG-280), the Soviet Navy as the Admiral Makarov, the United States Navy as USS Atka (AGB-3) and again in the U.S. Coast Guard as USCGC Southwind (WAGB-280).

References

This article incorporates text from the public domain Dictionary of American Naval Fighting Ships .The entry can be found here.