Van Norman Machine Tool Company

Last updated
Van Norman #12 milling machine VN 12.jpg
Van Norman #12 milling machine

The Van Norman Machine Tool Company was an American machine tool builder from late in the 19th century until the mid-1980s. The company was based in Springfield, Massachusetts, USA. Its main areas of focus were milling machines and grinding machines. The company was acquired by Universal American Corporation during the early 1960s. Universal American later merged with Gulf and Western Industries.

Contents

Early history

An advertisement from 1902. Waltham Watch Tool Co Van Norman advert in Machinery 1902.png
An advertisement from 1902.

A pair of brothers surnamed Van Norman were the founders of the company. Their names were Charles E. and Fred D. Van Norman. [1] The Van Normans began their company as the Hopkins Watch Tool Company in Waltham, Massachusetts around 1874. [2] Their first products were watch repair lathes and associated tooling. In 1883, they bought the name Waltham Watch Tool Company, as that company started watch production under the name of U.S. Watch Co. [2] It was at that time that the move was made to Springfield. [2]

In 1890 the first Van Norman Milling Machine was built, [1] and in 1914 the first of Van Norman's oscillating grinding machines was introduced. [1] Oscillating grinders were sold to many of the world's leading manufacturers of ball and roller bearings. [1]

Ram type mills

Van Norman was most noted for their "ram type" milling machines, which due to their swiveling head design could be converted quickly and easily from horizontal to vertical spindles. The ram type mills were produced for many years and in a wide range of sizes, from the home-shop-sized No. 6 up to the 9,000 pound No. 38. The company also produced heavy horizontal milling machines, as well as a small vertical milling machine for tool and die work.

#12 with head in horizontal position VN 12 Horiz.jpg
#12 with head in horizontal position
#12 with head in vertical position VN 12 Vert.jpg
#12 with head in vertical position

Other tools

In addition to milling machines, Van Norman pursued several other machining-related lines of business.

Automotive repair

Van Norman pioneered a portable boring bar that could be used to bore the cylinders of automobile engines without removing the engine from the automobile. They also manufactured other automotive service machinery, such as brake lathes and crankshaft grinders.

When Van Norman ceased to exist as an independent company, the automotive portion was purchased by Kwik-Way, who still sell tools and machinery using the Van Norman name.

Machine tools for grinding

Van Norman's line of grinding machines became very important in the bearing industry. Oscillating grinders were sold to many of the world's leading manufacturers of ball and roller bearings. [1] Van Norman sold its precision external centerless grinder line to Bryant in 1972. [3]

The Van Norman rotary surface grinders, primarily used to resurface engine flywheels, are currently manufactured by Irontite Products Inc. as of 2014, located in Cedar Rapids, Iowa. Irontite Products Inc. also purchased the rights to the Van Norman Brake Lathe line. They later stopped production of all brake lathes due to a dwindling market for resurfacing brake rotors and drums.

Spindle tooling

In keeping with many manufacturers of the era, some Van Norman machines use a proprietary spindle taper. The No. 6, No. 12, and some of the No. 16 ram type mills use what Van Norman referred to as their "C" taper (Hardinge refers to this taper as 5V today). This taper was also used in some of Van Norman's smaller dividing heads and auxiliary milling subheads. Some of the larger machines use Van Norman's "No. 2" taper (Hardinge 50V), and some of the larger dividing heads and milling subheads use this taper as well. Larger machines used an assortment of tapers—earlier mills will most likely have either some size of Brown & Sharpe taper or Van Norman's "No. 2" taper. Later mills usually have NMTB milling machine tapers (30, 40, or 50, depending on machine size). It is probable that any machine could be ordered new with any taper the buyer desired.

Related Research Articles

<span class="mw-page-title-main">Lathe</span> Machine tool which rotates the work piece on its axis

A lathe is a machine tool that rotates a workpiece about an axis of rotation to perform various operations such as cutting, sanding, knurling, drilling, deformation, facing, and turning, with tools that are applied to the workpiece to create an object with symmetry about that axis.

<span class="mw-page-title-main">Metalworking</span> Process of making items from metal

Metalworking is the process of shaping and reshaping metals to create useful objects, parts, assemblies, and large scale structures. As a term it covers a wide and diverse range of processes, skills, and tools for producing objects on every scale: from huge ships, buildings, and bridges down to precise engine parts and delicate jewelry.

A Woodworking machine is a machine that is intended to process wood. These machines are usually powered by electric motors and are used extensively in woodworking. Sometimes grinding machines are also considered a part of woodworking machinery.

<span class="mw-page-title-main">Collet</span> Type of chuck

A collet is a segmented sleeve, band or collar. One of the two radial surfaces of a collet is usually tapered and the other is cylindrical. The term collet commonly refers to a type of chuck that uses collets to hold either a workpiece or a tool but has other mechanical applications.

<span class="mw-page-title-main">Chuck (engineering)</span> Clamp used to hold an object with radial symmetry, especially a cylinder

A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece.

<span class="mw-page-title-main">Machine taper</span> System for securing cutting tools or toolholders in a spindle

A machine taper is a system for securing cutting tools or toolholders in the spindle of a machine tool or power tool. A male member of conical form fits into the female socket, which has a matching taper of equal angle.

<span class="mw-page-title-main">Tool and cutter grinder</span>

A Tool and Cutter Grinder is used to sharpen milling cutters and tool bits along with a host of other cutting tools.

<span class="mw-page-title-main">Turning</span> Machining process

Turning is a machining process in which a cutting tool, typically a non-rotary tool bit, describes a helix toolpath by moving more or less linearly while the workpiece rotates.

The shank is the end of a drill bit grasped by the chuck of a drill. The cutting edges of the drill bit contact the workpiece, and are connected via the shaft with the shank, which fits into the chuck. In many cases a general-purpose arrangement is used, such as a bit with cylindrical shaft and shank in a three-jaw chuck which grips a cylindrical shank tightly. Different shank and chuck combination can deliver improved performance, such as allowing higher torque, greater centering accuracy, or moving the bit independently of the chuck, with a hammer action.

<span class="mw-page-title-main">Lathe center</span>

A lathe center, often shortened to center, is a tool that has been ground to a point to accurately position a workpiece on an axis. They usually have an included angle of 60°, but in heavy machining situations an angle of 75° is used.

<span class="mw-page-title-main">Metal lathe</span> Machine tool used to remove material from a rotating workpiece

In machining, a metal lathe or metalworking lathe is a large class of lathes designed for precisely machining relatively hard materials. They were originally designed to machine metals; however, with the advent of plastics and other materials, and with their inherent versatility, they are used in a wide range of applications, and a broad range of materials. In machining jargon, where the larger context is already understood, they are usually simply called lathes, or else referred to by more-specific subtype names. These rigid machine tools remove material from a rotating workpiece via the movements of various cutting tools, such as tool bits and drill bits.

Bryant is a brand of machine tools headquartered in Springfield, Vermont. Acquired by Fives in 2015, the Bryant product line specializes in the grinding field, building grinding machines with computer numerical control (CNC).

<span class="mw-page-title-main">Jig grinder</span>

A jig grinder is a machine tool used for grinding complex shapes and holes where the highest degrees of accuracy and finish are required.

Machine – mechanical system that provides the useful application of power to achieve movement. A machine consists of a power source, or engine, and a mechanism or transmission for the controlled use of this power. The combination of force and movement, known as power, is an important characteristic of a machine.

<span class="mw-page-title-main">Grinding (abrasive cutting)</span> Machining process using a grinding wheel

Grinding is a type of abrasive machining process which uses a grinding wheel as cutting tool.

<span class="mw-page-title-main">Spindle (tool)</span> Rotary unit of a machine tool

In machine tools, a spindle is a rotating axis of the machine, which often has a shaft at its heart. The shaft itself is called a spindle, but also, in shop-floor practice, the word often is used metonymically to refer to the entire rotary unit, including not only the shaft itself, but its bearings and anything attached to it. Spindles are electrically or pneumatically powered and come in various sizes. They are versatile in terms of material it can work with. Materials that spindles work with include embroidery, foam, glass, wood, and etc.

<span class="mw-page-title-main">Automatic lathe</span>

In metalworking and woodworking, an automatic lathe is a lathe with an automatically controlled cutting process. Automatic lathes were first developed in the 1870s and were mechanically controlled. From the advent of NC and CNC in the 1950s, the term automatic lathe has generally been used for only mechanically controlled lathes, although some manufacturers market Swiss-type CNC lathes as 'automatic'.

<span class="mw-page-title-main">Milling (machining)</span> Removal of material from a workpiece using rotating tools

Milling is the process of machining using rotary cutters to remove material by advancing a cutter into a workpiece. This may be done by varying directions on one or several axes, cutter head speed, and pressure. Milling covers a wide variety of different operations and machines, on scales from small individual parts to large, heavy-duty gang milling operations. It is one of the most commonly used processes for machining custom parts to precise tolerances.

ASME B5 refers to a technical committee of the American Society of Mechanical Engineers and the standard they maintain which deals with machine tools.

Lewis Rasmus Heim was an American machinist and businessman who was the inventor of the Centerless Cylindrical Grinder, the Heim Joint Rod End Bearing and a pioneer of modern spherical, ball and roller bearings.

References

  1. 1 2 3 4 5 Kasunich 2002.
  2. 1 2 3 National Association of Watch and Clock Collectors 2009.
  3. Vermont Machine Tool (2003), History of Bryant Grinder , retrieved 2013-01-06.

Bibliography