Vehicle vinyl wrap

Last updated
Wrap advertising for Taylor Swift's 2024 album The Tortured Poets Department on a New Routemaster double-decker bus in London in 2024; a car wrapped in an advertisement for the third season of Bridgerton is also visible in the far right. LTZ1764-17-20240520-174132.jpg
Wrap advertising for Taylor Swift's 2024 album The Tortured Poets Department on a New Routemaster double-decker bus in London in 2024; a car wrapped in an advertisement for the third season of Bridgerton is also visible in the far right.
Wrapping process Wrapping process.jpg
Wrapping process

A vehicle vinyl wrap is the automotive aftermarket practice of completely or partially covering a vehicle's original paint with a vinyl wrap. [1] Generally this vinyl wrap will be a different color or finish like a gloss, matte, chrome or clear protective layer.

Contents

The purpose may be for a color change, advertising or custom livery.

Vinyl wraps were first used for advertising, resulting in vehicle becoming essentially mobile billboards. The vinyl sheets can later be removed with relative ease, drastically reducing the costs associated with changing advertisements.

History

A streetcar in Toronto wearing a temporary wrap, advertising CBC Radio 2 ALRV 4204 in CBC Radio 2 Wrap Advertising.jpg
A streetcar in Toronto wearing a temporary wrap, advertising CBC Radio 2
Shows how wet bus wrap distorts the view from inside through wrapped bus windows. The window on the left has a wrap advertisement on the outside whereas the window on the right does not WetBusWrap.jpg
Shows how wet bus wrap distorts the view from inside through wrapped bus windows. The window on the left has a wrap advertisement on the outside whereas the window on the right does not

Vehicle vinyl wrap and color change wrap grew in popularity out of the wrap advertising business. The first attempts at using the plastic in commercial applications failed as a result of being too fragile. In 1926, Waldo Semon invented the vinyl still used today by introducing additives to PVC that made it flexible and easier to process. [2]

One of the earliest cosmetic vinyl treatments dates to the 1950s and an aftermarket product by Newhouse Automotive Industries of Los Angeles, California. [3] Costs for do-it-yourself (DIY) partial decorative (plaid or polka dot) vinyl treatments ranged from $10–20. The Newhouse Automotive ads described vinyl as the "very latest automotive sensation:" vehicle wraps. These ads began in 1954. [4]

The world's first total bus wrap was produced in 1991 by Contra Vision in New Zealand for the Pan Pacific Hotel. The bus was converted into a mobile billboard which still allowed passengers inside to see out. The glass was covered with see-through graphics (one-way vision window graphics) using a clear PET window film which was part screen printed and part spray painted. The bodywork was directly spray painted.

A large milestone in the shift from small production vinyl lettering to a full vehicle vinyl color change took place in Germany in 1993 when the vinyl manufacturer Kay Premium Marking Films (KPMF) was asked to produce a film to be used in place of paint for the purpose of converting cars into taxis. At this time, German taxi companies were required by law to paint their fleets in a government-mandated color, beige. KPMF provided an alternative to painting, which allowed taxi companies to bring a large fleet of vehicles into compliance with German law while maintaining the future resale value of the vehicle. Prior to this point, decommissioned taxis were heavily discounted or had to be completely repainted. With the use of vinyl vehicle wraps, there was no need to repaint them or discount them as the vinyl could be removed without damaging the paint underneath. KPMF documented after 3 years of taxi service was complete, the vinyl was removed leaving a "pristine and unscratched paint surface". [5]

The first world's first digitally printed vehicle wrap is thought to have been created for Pepsi Co in 1993, which used vinyl to wrap a bus promoting its Crystal Pepsi product. It wasn't long before bus wrap advertising was everywhere and the new form of vehicle graphics trickled down to smaller businesses and consumers. Wrapping whole vehicles was still challenging. Majority of the difficulties came from premature adhesion and air bubbles under the vinyl. As technology improved, companies like Avery Dennison, 3M and Oracal developed the use of air-channels that made the vinyl repositionable and allowed for bubble-free installation. Air-channel, created using microscopic glass beads incorporated into the vinyl's adhesive, prevented the vinyl from fully sticking to the substrates surface thereby permitting air flow between adjacent sections. In addition, these beads allow for the vinyl to be repeatedly removed and reapplied until the beads are broken by firmly pressing the vinyl using a small hard squeegee. Once the beads are broken the vinyl will be firmly adhered to the substrates surface. Proprietary company blends of polymer in the vinyl allowed the material to conform to compound curves, recesses, and corrugations through the use of heat guns and torches. [6]

By 2017, color change vinyl wraps, paint color matching vinyl wraps, and overlaminates evolved to include complex and creative graphic designs and advanced colors. Metallic, chrome, color shifting and even vinyl wraps that match OEM paint code colors are available. Color change and paint wrap is a term used by wrap installers and refers to a full-color change, as if one were 'painting' a car with a vinyl wrap. Demand for color matching vinyl wrap has grown. The wrap is manufactured to match vehicle paint colors and metallics, as well as in colors used in print such as Pantone colors. Most color change wraps are done to the exterior of a vehicle. Wrap installers can also wrap the door jambs (inner parts of the doors that can be seen when the doors are not closed) and other parts. These parts add additional cost to a wrap installation.

Process

This train bears GNER's standard livery rather than an advertisement, but as it was on lease from Eurostar, the livery was applied using vinyl Kings Cross GNER White Rose.jpg
This train bears GNER's standard livery rather than an advertisement, but as it was on lease from Eurostar, the livery was applied using vinyl

Advancements in plastics have led to new types of vinyl designed specifically for wrap advertising, including vinyl sheets that feature bubble-preventing air channels. Microscopic glass beads are used to prevent an adhesive from functioning until the user is ready (the beads allow the material to be repeatedly lifted and reapplied during the wrapping process, without compromising the longevity of the wrap). The vinyl is heated with a heat gun or torch for the purpose of molding the material around objects. [7]

Decals can be made to cover side and rear windows on a vehicle, but for safety reasons, the front windows used by the driver are not covered. The decals on side windows are typically perforated, so that it is still possible for passengers to look outside. This See-through graphic technology originated in the 1980s, with the first dominant patent registered by a British company called Contra Vision. [8]

Types

There are three main types of vinyl wrap for automotive vehicles:

Manufacture

Cast vinyl is the most common material used in color change wraps. Cast vinyl starts as a liquid and is cast into a sheet or form and then processed through ovens, evaporating solvents in the liquid. When the solvents evaporate, the remainder forms a solid film. Its thickness lies in the order of mils (thousandths of an inch) or μm (micrometers), and usually varies between 2 mils (51 μm) for printable media to 4 mils (100 μm) for solid color. Cast films conform well to curved shapes and strongly retain their original shape. [9] This durability of shape allows for predictability on application and in applying heat to relax the material back to its natural form after modest stretching. Cast vinyl is less prone to shrinkage because stress (such as extrusion as in calendared films) is not applied to the material during the manufacturing process.

Cast vinyl

The term "cast" refers to the manufacturing process of this type of vinyl. Cast films are considered the industry premium. These films start in a liquid state with the ingredients blended together and then poured onto a casting sheet. The casting process produces a thin gauge film—usually 1- to 2-mil thick. By casting film on a sheet, the film stays in a more relaxed state, resulting in a durable, flexible, conformable and dimensionally stable film that retains color well. These films are ideal for complex surfaces such as vehicles and where a smooth finished look is expected.

Calendered vinyl

Calendered vinyl film or sheeting is manufactured by mixing powdered PVC, liquid softener and coloring agent into a molten dough-like mixture. The mixture is then extruded through a die and pressed into an increasingly thin sheet using a series of hard pressure rollers, called calendering rolls. When the material reaches the rollers, it passes through a series of decreasing gaps, which in turn increases the temperature and uniformity of the mixture. After each pass, the film becomes thinner and wider until the material is formed into a thin sheet of vinyl. The vinyl is then cooled, wound, and later coated with adhesive. [10]

Legislation

A number of municipalities have introduced strict laws in order to mandate against mobile advertisements; this has partially been due to the fact that wrap advertisements are purposefully circulated throughout high-density areas. New York City is a notable example, where any sort of motorized advertisement is outlawed. California also has strict rules [11] . Mobile billboards have been identified as a contributing factor in the city's already-problematic traffic congestion. [12]

Other kinds of vinyl wrap

Color change wraps are similar in that a vinyl (although a cast vinyl sheet) is used to cover parts or whole vehicles in a new color or in a protective form of a color matching vinyl that may match an OEM paint color or may be a brand new color entirely. Many consumers are able to change the color of their vehicle to something that may not be available or even possible with paint. This may require disclosure to both the vehicle insurer and local vehicle authority, such as the DVLA in the UK, or the Department of motor vehicles (or equivalent) in each state of the USA.

Paint protection films (PPF) are clear and OEM paint color match vinyl films designed to protect paint. Clear PPF allows the original paint color to show through the protective vinyl and color matching vinyl films replicate the OEM color with a protective vinyl.

See also

Related Research Articles

<span class="mw-page-title-main">Plotter</span> Computer output device that draws lines on paper by moving a pen

A plotter is a machine that produces vector graphics drawings. Plotters draw lines on paper using a pen, or in some applications, use a knife to cut a material like vinyl or leather. In the latter case, they are sometimes known as a cutting plotter.

<span class="mw-page-title-main">Polyvinyl chloride</span> Common synthetic polymer

Polyvinyl chloride (alternatively: poly(vinyl chloride), colloquial: vinyl or polyvinyl; abbreviated: PVC) is the world's third-most widely produced synthetic polymer of plastic (after polyethylene and polypropylene). About 40 million tons of PVC are produced each year.

<span class="mw-page-title-main">Bumper sticker</span> Sticker placed on the back of a car

A bumper sticker is an adhesive label or sticker designed to be attached to the rear of a car or truck, often on the bumper. They are commonly sized at around 25.4 cm by 7.6 cm and are typically made of PVC.

<span class="mw-page-title-main">Decal</span> Pattern or image that can be moved to another surface upon contact

A decal or transfer is a plastic, cloth, paper, or ceramic substrate that has printed on it a pattern or image that can be moved to another surface upon contact, usually with the aid of heat or water.

<span class="mw-page-title-main">Adhesive bandage</span> Small self-adhesive medical dressing

An adhesive bandage, also called a sticking plaster, sticky plaster, medical plaster, or simply plaster in British English, is a small medical dressing used for injuries not serious enough to require a full-size bandage. They are also known by the genericized trademarks of Band-Aid or Elastoplast.

<span class="mw-page-title-main">Lamination</span> Technique of fusing layers of material

Lamination is the technique/process of manufacturing a material in multiple layers, so that the composite material achieves improved strength, stability, sound insulation, appearance, or other properties from the use of the differing materials, such as plastic. A laminate is a layered object or material assembled using heat, pressure, welding, or adhesives. Various coating machines, machine presses and calendering equipment are used.

<span class="mw-page-title-main">Bus advertising</span>

In bus advertising, buses and their related infrastructure is a medium commonly used by advertisers to reach the public with their message. Usually, this takes the form of promoting commercial brands, but can also be used for public campaign messages. Buses may also be used as part of a political or promotional campaign, or as a tool in a commercial enterprise.

<span class="mw-page-title-main">Mobile billboard</span>

A mobile billboard, also known as a "digital billboard truck", is a device used for advertising on the sides of a truck or trailer that is typically mobile. Mobile billboards are a form of transit media; static billboards, and mall/airport advertising fall into this same category. Using a mobile billboard for advertising is an advertising niche called mobile outdoor advertising.

<span class="mw-page-title-main">Electrical tape</span> Adhesive electrical insulation

Electrical tape is a type of pressure-sensitive tape used to insulate electrical wires and other materials that conduct electricity. It can be made of many plastics but PVC is the most popular, as it stretches well and gives effective and long-lasting insulation. Electrical tape for class H insulation is made of fiberglass cloth.

<span class="mw-page-title-main">Heat-shrink tubing</span> Shrinkable plastic tube used to insulate wires

Heat-shrink tubing is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical wiring. It can also be used to repair the insulation on wires or to bundle them together, to protect wires or small parts from minor abrasion, and to create cable entry seals, offering environmental sealing protection. Heat-shrink tubing is ordinarily made of a polyolefin, which shrinks radially when heated, to between one-half and one-sixth of its diameter.

<span class="mw-page-title-main">Wide-format printer</span> Computer-controlled printing machine

Wide format printers are generally accepted to be any computer-controlled printing machines (printers) that support a maximum print roll width of between 18 and 100 inches. Printers with capacities over 100 in wide are considered super-wide or grand format. Wide-format printers are used to print banners, posters, trade show graphics, wallpaper, murals, backlit film (duratrans), vehicle image wraps, electronic circuit schematics, architectural drawings, construction plans, backdrops for theatrical and media sets, and any other large format artwork or signage. Wide-format printers usually employ some variant of inkjet or toner-based technology to produce the printed image; and are more economical than other print methods such as screen printing for most short-run print projects, depending on print size, run length, and the type of substrate or print medium. Wide-format printers are usually designed for printing onto a roll of print media that feeds incrementally during the print process, rather than onto individual sheets.

<span class="mw-page-title-main">Blister pack</span> Type of packaging

A blister pack is any of several types of pre-formed plastic packaging used for small consumer goods, foods, and for pharmaceuticals.

<span class="mw-page-title-main">Nameplate</span> Object used to indicate somethings or someones name

A nameplate identifies and displays a person or product's name. Nameplates are usually shaped as rectangles but are also seen in other shapes, sometimes taking on the shape of someone's written name. Nameplates primarily serve an informative function or a commercial role. Whereas name tags tend to be worn on uniforms or clothing, nameplates tend to be mounted onto an object or physical space. Nameplates are also distinct from name plaques. Plaques have larger dimensions and aim to communicate more information than a name and title.

Vinyl banners are a form of banners made of vinyl. The most commonly used material is PVC. Most banners are now digitally printed on large format inkjet printers which are capable of printing a full color outdoor billboard on a single piece of material. They are used for outdoor advertising.

<span class="mw-page-title-main">Paint protection film</span>

Paint protection film is a thermoplastic urethane often self-healing film applied to painted surfaces of a new or used car in order to protect the paint from stone chips, bug splatters, and minor abrasions. This film is also used on airplanes, RVs, cell phones, electronics, screens, motorcycles, and many other areas. Paint protection film is OEM approved by virtually all car manufacturers.

<span class="mw-page-title-main">Edge banding</span> A material or process used in finish carpentry

Edge banding or edgebanding is the name of both a process, and an associated narrow strip of material. It is used to create durable and aesthetically pleasing trim edges during finish carpentry. The method is used to cover the exposed sides of materials such as plywood, particle board, or MDF. This increases durability and creates the appearance of a more solid or valuable material.

<span class="mw-page-title-main">Wall decal</span> Decorative item

A wall decal, also known as a wall sticker, wall tattoo, or wall vinyl, is a vinyl sticker that is affixed to a wall or other smooth surface for decoration and informational purposes. Wall decals are cut with vinyl cutting machines. Most decals use only one color, but some may have various images printed upon them.

<span class="mw-page-title-main">Vinyl cutter</span>

A vinyl cutter is an entry-level machine for making signs. Computer-designed vector files with patterns and letters are directly cut on the roll of vinyl which is mounted and fed into the vinyl cutter through USB or serial cable. Vinyl cutters are mainly used to make signs, banners and advertisements. Advertisements seen on automobiles and vans are often made with vinyl cut letters. While these machines were designed for cutting vinyl, they can also cut through computer and specialty papers, as well as thicker items like thin sheets of magnet.

<span class="mw-page-title-main">See-through graphics</span> Window films that allow seeing from the interior

See-through graphics can be added to glass or other transparent panels to provide advertising, branding, architectural expression, one-way privacy and solar control.

Heat transfer vinyl (HTV) is a speciality polyurethane with a heat-activated adhesive that can be used on certain fabrics and materials to apply designs to promotional products, textiles and apparel, such as T-shirts. It comes laminated together with a clear polyester carrier in a roll or sheet form, with an adhesive tacky backing, so it can be cut, weeded, and placed on a substrate for application via a heat press. The design is cut into the material with a cutting plotter in reverse. The excess material is removed with tools such as hooks or tweezers - a manual and dextrous process referred to as "weeding". The tacky adhesive between the carrier and the vinyl holds together complex designs, although the labour naturally increases the more weeding that is required. The clear polyester carrier keeps the design visible to aid positioning on the substrate. For these and other reasons, it is a popular and more robust alternative to transfer paper. Heat transfer vinyl is made in single colors and also has special options such as patterned, glitter, flocked, holographic, glow-in-the-dark, reflective and 3D puff. Heat transfer vinyl also benefits from a high degree of stretch and rebound, achieved by a memory effect, making it suitable for use on apparel and other flexible items including the garments typically used, such as sports jerseys.

References

  1. ↑ "How to Vinyl-Wrap a Car". Popular Mechanics. 12 February 2013. Retrieved 20 July 2017.
  2. ↑ "The history of PVC". Archived from the original on 7 January 2012. Retrieved 2 July 2018.
  3. ↑ "As it turns out, vehicle wraps are anything but new". Autoblog. Retrieved 18 July 2017.
  4. ↑ "Classified Opportunities: Automotive & Midget Cars". Popular Science . March 1954. Retrieved 12 September 2023– via Google Books.
  5. ↑ "History of Vehicle Wrap". KPMF USA. Retrieved 12 September 2023.
  6. ↑ "3M Controltac Graphic Film and Comply Adhesive". 28 September 2009.{{cite journal}}: Cite journal requires |journal= (help)
  7. ↑ "3M Controltac Graphic Film with Comply Adhesive" (PDF). Retrieved 19 September 2007.
  8. ↑ US Patent No. RE37,186 “Unidirectional Panel” (Hill).
  9. ↑ Waters, Molly (10 May 2013). "Cast vs. Calendered Vinyl Films". signindustry.com. Archived from the original on 13 March 2015. Retrieved 12 September 2023.{{cite web}}: CS1 maint: unfit URL (link)
  10. ↑ Waters, Molly. "Cast vs. Calendered Vinyl" . Retrieved 15 October 2016.
  11. ↑ "California DMV Car Wrap Rules". Car Wrap Wizard. Retrieved 28 June 2024.
  12. ↑ Gotham Gazette (9 June 2003). "City Council Transportation Legislation". Gotham Gazette. Retrieved 2 July 2012.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.