Vespa 400 | |
---|---|
Overview | |
Manufacturer | ACMA |
Production | 1957–1961 |
Assembly | Fourchambault, France |
Body and chassis | |
Class | Microcar |
Body style |
|
Layout | Rear-engine, rear-wheel-drive |
Powertrain | |
Engine | 24.0 cu in (0.4 L) two-stroke I2 |
Transmission | 3-speed manual (GT 4-speed) |
Dimensions | |
Wheelbase | 1,693 mm (66.7 in) |
Length | 2,850 mm (112 in) |
Width | 1,270 mm (50 in) |
Height | 50 in (1,300 mm) [1] |
Curb weight | 375 kg (827 lb)[ citation needed ] |
The Vespa 400 is a rear-engined microcar, produced by ACMA in Fourchambault, France, from 1957 until 1961 to the designs of the Italian Piaggio company. Three different versions were sold, the "Luxe" , "Tourisme" and "GT". [2] [3]
The car made its high-profile public debut on 26 September 1957 at a press presentation staged in Monaco. [4] The ACMA directors ensured a good attendance from members of the press by also inviting three celebrity racing drivers [5] to the Vespa 400 launch. [4]
The 400 was a two seater with room behind the seats to accommodate luggage or two small children on an optional cushion. The front seats were simple tubular metal frames with cloth upholstery on elastic "springs" and between the seats were the handbrake, starter and choke. The gear change was centrally floor mounted. The rear hinged doors were coated on the inside with only a thin plastic lining attached to the metal door panel skin allowing valuable extra internal space. On the early cars the main door windows did not open which attracted criticism, but increased the usable width for the driver and passenger. Instrumentation was very basic with only a speedometer and warning lights for low fuel, main beam, dynamo charging and indicators. The cabriolet fabric roof could be rolled back from the windscreen header rail to the top of the rear engine cover leaving conventional metal sides above the doors. The 12-volt battery was located at the front of the car, behind the dummy front grill, on a shelf that could be slid out. The spare wheel was stowed in a well under the passenger seat. [4]
The high-profile launch paid off, with 12,130 cars produced in 1958. [6] That turned out to be the high point, however, and output fell to 8,717 in 1959 despite a price reduction for the entry level 2-seater "normal" coupé from 345,000 francs to 319,500 francs between October 1957 and October 1958. [6] Commentators suggested that the chic image created at the time of the launch was not always matched by the car itself, with its awkward gear change, poor sound-proofing and, especially before a modification to the carburetor specification, high fuel consumption. [6] The car's origins, developed by a leading world producer of motor scooters, Italy's Piaggio Company, makers of the Vespa since 1946, was reflected in the installation, in the Vespa 400, of a two stroke (motorbike style) engine which required oil to be added to the petrol/gasoline whenever the car was refueled. [6] During the summer of 1958 the cars were fitted with a semi-automatic device for adding oil to the fuel, but a fully automatic fuel mixing device was not included until two years later. [6]
The British Motor magazine tested a 400 de luxe saloon in 1959 recording a top speed of 51.8 mph (83.4 km/h) and acceleration from 0-40 mph (64 km/h) in 23.0 seconds and a fuel consumption of 55.3 miles per imperial gallon (5.11 L/100 km; 46.0 mpg‑US). The test car cost 351,725 "old" French Francs, [1] cheaper than the 374,000 "old" French Francs domestic market starting price quoted towards the end of 1958 for the cheapest version of the larger but (even) less powerful Citroën 2CV. [4]
The Isetta is an Italian-designed microcar built under license in a number of different countries, including Argentina, Spain, Belgium, France, Brazil, Germany, and the United Kingdom. Because of its egg shape and bubble-like windows, it became known as a bubble car, a name also given to other similar vehicles.
The Citroën Ami is a four-door, front-wheel drive economy (B-segment) family car, manufactured and marketed by Citroën from 1961 to 1978.
The Peugeot 403 is a mid-size car manufactured and marketed by Peugeot between May 1955 and October 1966. A total of 1,214,121 of all types, including commercial models, were produced, making it the first Peugeot to exceed one million in sales.
The MGA is a sports car that was produced by MG from 1955 until 1962.
The Austin Westminster series are large saloon and estate cars that were sold by the British manufacturer Austin from 1954, replacing the A70 Hereford. The Westminster line was produced as the A90, A95, A99, A105, and A110 until 1968 when the new Austin 3-Litre took its place. Essentially badge-engineered versions of the Farina Westminsters were also produced using the premium Wolseley and Vanden Plas marques. 101,634 Westminsters were built.
The Peugeot 203 is a small family car which was produced by the French car manufacturer Peugeot between 1948 and 1960.
Goggomobil was a series of microcars produced by Hans Glas in the Bavarian town of Dingolfing between 1955 and 1969.
The Renault Juvaquatre is a small family car / compact car automobile produced by the French manufacturer Renault between 1937 and 1960, although production stopped or slowed to a trickle during the war years. The Juvaquatre was produced as a sedan/saloon until 1948 when the plant switched its full attention to the new Renault 4CV. During the second half of 1952 the plant restarted production of the Juvaquatre sedans/saloons for a period of approximately five months.
The Renault Caravelle is a sports car manufactured and marketed by Renault for model years 1958–1968 in a single generation — as a rear-engine, rear-drive open two/four-seater designed by Pietro Frua of Carrozzeria Ghia, using the floorpan and engine of the Renault Dauphine.
The Simca Aronde is an automobile which was manufactured by the French automaker Simca from 1951 to 1964. It was Simca's first original design, as well as the company's first unibody car. "Aronde" means "swallow" in Old French and it was chosen as the name for the model because Simca's logo at that time was a stylized swallow.
Rovin was a French auto-maker established in the Paris region, and most active from 1946 until 1959, although after 1953 production slowed to a trickle. The firm was established, initially as a motor-cycle business, in 1921 by the racing driver and motorcycle constructor, Raoul Pegulu, Marquis of Rovin. The car was developed by Raoul but in 1946 production became the responsibility of his brother, Robert who continued to run the business after Raoul's death.
The Simca 8 is a small family car built by Simca and sold in France between November 1937 and 1951, available as a saloon, coupé or cabriolet. It was a rebadged Fiat 508C "nuova Balilla" made at Fiat's Simca plant in Nanterre, France.
The SMZ cyclecar was a Soviet microcar, manufactured in Serpukhov, Russia, by Serpukhov Motor Works, later known as the now-defunct SeAZ. The most common models were the S-3A (S-Three-A) and S-3D (S-Three-D). They were specially designed for disabled drivers and were distributed in the USSR free or at a large discount through the Soviet Union's social welfare system, and were not officially sold to non-disabled people. The S-3A-M was produced between 1958 and 1970. It was powered by a 346 cc single-cylinder two-stroke engine, giving 10 hp (7 kW) and a top speed of 55 km/h (34 mph).
The Peugeot 402 is a large family car produced by Peugeot in Sochaux, France, from 1935 to 1942. It was unveiled at the Paris Motor Show in 1935, replacing the Peugeot 401.
The Vespa LX is a scooter that was made by Piaggio from 2006 until 2014.
ACMA was founded on 25 November 1950 as Ateliers de construction de motocycles et accessoires in Fourchambault, near Dijon, France.
The Talbot Baby is a six-cylinder executive sporting car launched by the French Talbot company in 1936. The three standard body types offered were a "coach", a two-door four-seater "cabriolet" and a two-door two-seater "cabriolet". The Baby was one of the first new models to appear after the French part of the Anglo-French Sunbeam-Talbot-Darracq combine was purchased, in 1935, by auto-entrepreneur Tony Lago. Production slowed with the onset of war and had ended completely by mid-1942 when the manufacturer's Suresnes plant was converted for war production.
The Talbot-Lago Sport is a coupé-bodied sports car introduced by the manufacturer in May 1955 that was Talbot-Lago's last production model. 54 were built. After a couple of years the Talbot-designed engine was replaced with a BMW unit and the car was rebranded as the Talbot-Lago America.
The Salmson S4 is a mid-size executive-level car introduced as the Salmson S4 C by Société des Moteurs Salmson in Autumn 1932. It was the manufacturer's principal and often sole model for the next twenty years.
The Ligier JS4 is a four-wheeled, two-seater microcar manufactured from 1980 to 1983 by Ligier, the street vehicle branch of French Formula One manufacturer Équipe Ligier. It marked a change in Ligier's priorities as they had recently ended manufacture of the Ligier JS2 sports car. It is a "Voiture sans permis", a light vehicle which did not require a driver's license and was thus popular with the elderly, the young, or with those who had lost their driving privileges. The JS4 was first presented on 25 July 1980.