Viking SF-2A Cygnet

Last updated

SF-2A Cygnet
Sisler SF-2A Cygnet G-BYYC (43960248025).jpg
Role Amateur-built aircraft
National origin United States
Manufacturer Viking Aircraft LLC
DesignerBert Sisler
First flight1973
Introduction1973
StatusPlans available (2003)
Number built100 (2003)
Developed from Sisler SF-2 Whistler

The Viking SF-2A Cygnet, also called the Sisler SF-2A Cygnet and the HAPI SF-2A Cygnet, is an American STOL amateur-built aircraft, designed by Bert Sisler and produced by Viking Aircraft LLC. The aircraft is supplied in the form of plans for amateur construction. The Cygnet first flew in 1973. [1] [2]

Contents

The Cygnet plans were originally marketed by the designer through his company Sisler Aircraft of Bloomington, Minnesota and later by HAPI Engines, a supplier of Volkswagen air-cooled engines. By the 1990s Viking Aircraft of Elkhorn, Wisconsin took over supplying the aircraft plans. [1] [2] [3] [4]

Design and development

The SF-2A Cygnet is a development of the earlier Sisler SF-2 Whistler introduced in 1973. The design features a strut-braced shoulder-wing, a two-seats-in-side-by-side configuration enclosed cockpit under a bubble canopy, fixed conventional landing gear and a single engine in tractor configuration. [1] [2] [3]

The aircraft is made from wood, 4130 steel tubing and covered in doped aircraft fabric. Its 30 ft (9.1 m) span wing employs a NACA 3413 airfoil, has an area of 125 sq ft (11.6 m2) and is supported by a single strut with a jury strut. The cockpit is 39 in (99 cm) wide and has a baggage compartment with a limit of 70 lb (32 kg), located behind the seats. The aircraft's recommended engine power range is 60 to 82 hp (45 to 61 kW) and standard engines used include the 82 hp (61 kW) Volkswagen four-stroke powerplant. Construction time from the supplied kit is estimated as 1700–1800 hours. [1] [2] [4]

The Cygnet won a design award at the EAA Annual Convention and Fly-In in 1973. [1]

Operational history

SF-2A Cygnet Sisler SF-2A Cygnet G-BYYC (24049082708).jpg
SF-2A Cygnet

By January 2003, 100 examples had been reported as completed and flown. [2]

In July 2016 a total of 19 SF-2A Cygnets were registered in the United States with the Federal Aviation Administration, four with Transport Canada and seven with the Civil Aviation Authority in the United Kingdom. [5] [6] [7]

In a 2020 review, AVweb writer Paul Dye concluded, "Flying a piece of history (and with a forward swept wing, something fairly unique!) is always fun. Just like all strange meat gets described as "tasting like chicken", it is easy to describe airplanes like this as flying "like a Cub"—and it’s true, in the sense that it is well-mannered and easy to steer around the sky. Yes, that visibility at the start of a turn is going to take a little getting used to, as is the landing attitude. But if you take the time to get it figured out, the Cygnet is a nice little airplane with a Midwest tradition. Honest, straightforward, and enjoyable.". [8]

Specifications (SF-2A Cygnet)

SF-2A Cygnet G-BWFN Sisler SF-2A Cygnet (9679534921).jpg
SF-2A Cygnet

Data from Kitplanes and Purdy [1] [2]

General characteristics

Performance

Related Research Articles

Barrows Bearhawk

The Barrows Bearhawk, now also called the Barrows 4-Place Bearhawk, is an American amateur-built aircraft, designed by Bob Barrows and produced by R&B Aircraft of Fincastle, Virginia, AviPro Aircraft and now Bearhawk Aircraft of Austin, Texas. The aircraft is supplied as a kit or as plans for amateur construction.

Murphy Rebel

The Murphy Rebel is a two- or three-seat, strut braced, high wing, taildragger monoplane which is sold in kit form by Murphy Aircraft in Chilliwack, British Columbia, Canada.

Lancair Legacy American homebuilt aircraft

The Lancair Legacy, a modernized version of the Lancair 320, is a low-wing two-place retractable-gear composite monoplane, manufactured by the US company Lancair. It is available as a kit that cost US$71,500 in 2011. There is also a fixed-gear version, the Legacy FG. The retractable version of the Legacy cruises at 276 mph at 8,000 ft and the fixed gear version cruises at 215 mph.

The Falconar AMF-S14 Maranda is a two-seat, light aircraft first flown in Canada in 1961 and originally marketed for amateur construction by Falconar Avia.

The Fisher Youngster is a Canadian single-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft was inspired by the German Bücker Bü 133 Jungmeister aerobatic aircraft of the 1930s.

The Fisher Horizon is a family of Canadian two-seats-in-tandem, conventional landing gear, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders. The Horizon 1 was inspired by the Aeronca Champion and its later version, the Bellanca Citabria, while the Horizon 2 was inspired by the Cessna O-1 Bird Dog.

Murphy Renegade

The Murphy Renegade is a family of Canadian two-seats-in-tandem, single engine, conventional landing gear, biplanes, produced by Murphy Aircraft and intended for amateur construction.

The Bagalini Bagaliante is an Italian high-wing, strut-braced, single-seat, pusher configuration, conventional landing gear motor glider that was designed by Marino Bagalini and made available as plans for amateur construction.

The Danieli Piuma is a family of Italian high-wing, strut-braced, pusher configuration single-seat motor gliders that was designed by Tiziano Danieli of Schio and supplied as plans for amateur construction.

Hummel H5

The Hummel H5 is an American amateur-built aircraft, designed by Morry Hummel and produced by Hummel Aviation. The aircraft is supplied as a kit or plans for amateur construction.

Murphy Elite

The Murphy Elite is a Canadian light aircraft that was designed and is produced by Murphy Aircraft of Chilliwack, British Columbia. The aircraft is supplied as a kit for amateur construction.

Bushcaddy R-80

The Bushcaddy R-80 is a Canadian ultralight and light-sport aircraft that was designed by Jean Eudes Potvin of Lac Saint-Jean, Quebec in 1994 and produced by his company Club Aeronautique Delisle Incorporated (CADI). It was later built by Canadian Light Aircraft Sales and Service (CLASS) of St. Lazare, Quebec and later Les Cedres, Quebec and now Bushcaddy of Lachute, Quebec.

Bushcaddy R-120

The Bushcaddy R-120 is a Canadian kit aircraft produced by Canadian Light Aircraft Sales and Service (CLASS) of St. Lazare, Quebec and later Les Cedres, Quebec and now Bushcaddy of Lachute, Quebec and more recently Cornwall Regional Airport in Summerstown, Ontario.

Glasair GlaStar American homebuilt airplane

The Glasair GlaStar is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation. It was first flown in 1994 and was superseded in production by the Glasair Sportsman 2+2 c. 2005. When it was available the aircraft was supplied as a kit for amateur construction.

St-Just Super-Cyclone Canadian amateur-built aircraft

The St-Just Super-Cyclone is a Canadian amateur-built aircraft produced by St-Just Aviation of Boucherville, Quebec. The aircraft is supplied as plans or as a kit for amateur construction.

Custom Flight North Star

The Custom Flight North Star is a Canadian amateur-built aircraft, designed by Morgan Williams and produced by Custom Flight of Tiny, Ontario. The aircraft is based on the Piper PA-18 Super Cub and is supplied as a kit for amateur construction.

Hummel Ultracruiser American ultralight airplane

The Hummel Ultracruiser is an American amateur-built aircraft, designed by Morry Hummel and produced by Hummel Aviation. The aircraft is supplied as a kit or plans for amateur construction or as a complete ready-to-fly aircraft.

Just Superstol

The Just SuperSTOL is an American STOL amateur-built aircraft, designed and produced by Just Aircraft of Walhalla, South Carolina. The aircraft is supplied as a kit for amateur construction.

The Bagalini Bagalini is an Italian homebuilt ultralight aircraft that was designed by Marino Bagalini. The aircraft is supplied in the form of plans for amateur construction.

The American Homebuilts John Doe is an American STOL homebuilt aircraft that was designed by Steve Nusbaum and produced by American Homebuilts of Hebron, Illinois, first flown in 1994. When it was available the aircraft was supplied as a kit for amateur construction.

References

  1. 1 2 3 4 5 6 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 285. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
  2. 1 2 3 4 5 6 Downey, Julia: 2003 Plans Aircraft Directory, Kitplanes, Volume 20, Number 1, January 2003, page 29. Primedia Publications. ISSN   0891-1851
  3. 1 2 Aerofiles (7 April 2009). "Aircraft from Saalfield SEE Skyskootor" . Retrieved 4 December 2012.
  4. 1 2 Lednicer, David (2010). "The Incomplete Guide to Airfoil Usage" . Retrieved 3 November 2012.
  5. Federal Aviation Administration (21 July 2016). "Make / Model Inquiry Results" . Retrieved 21 July 2016.
  6. Transport Canada (21 July 2016). "Canadian Civil Aircraft Register" . Retrieved 21 July 2016.
  7. Civil Aviation Authority (United Kingdom) (21 July 2016). "GINFO Search Results Summary" . Retrieved 21 July 2016.
  8. Dye, Paul (22 December 2020). "Cygnet Distinction". AVweb. Archived from the original on 23 December 2020. Retrieved 15 December 2020.