Volmer VJ-24W SunFun

Last updated

VJ-24W SunFun
Volmer VJ-24 Sunfun at Newark Air Museum.jpg
Role Motor glider/Ultralight aircraft
National origin United States
Manufacturer Volmer Aircraft
Designer Volmer Jensen
Introduction1977
Developed from Volmer VJ-23 Swingwing
Variants Delta Sailplane Nomad

The Volmer VJ-24W SunFun is an American high-wing, strut-braced, single-seat, pod-and-boom motor glider and ultralight aircraft that was designed by Volmer Jensen and provided as plans for amateur construction by his company Volmer Aircraft of Glendale, California. [1] [2] [3] [4]

Contents

Design and development

The SunFun started as a foot-launched glider design, the VJ-24, and was developed into a wheeled undercarriage motor glider, the VJ-24W. The VJ-24 was derived from the earlier Volmer VJ-23 Swingwing and differed from that design by replacing the wooden structure with metal and employing a constant chord, strut-braced wing in place of the VJ-23's cantilever, tapered wing. [1] [3] [4]

The aircraft is built from aluminium tubing covered with aircraft fabric. The 36.5 ft (11.1 m) span wing is braced by V-struts, supported by triangular jury struts. The fuselage is built around a keel tube that mounts the cruciform tail at the aft end, the wing and cockpit in the center and the engine at the front. The specified engines are the Yamaha KT100 15 hp (11 kW) go-kart powerplant and the 10 hp (7 kW) McCulloch MAC-101, mounted in tractor configuration on the front of the keel tube, above the aircraft's nose. The landing gear is of conventional configuration, using spoked bicycle wheels for the main gear. Pilot weight is limited to 200 lb (91 kg). [1] [4]

The take-off and landing distances with the 15 hp (11 kW) engine are both 100 ft (30 m). [1]

In 1998 plans cost US$100 and the estimated cost of the materials to build the VJ-24W were US$2400. The estimated construction time is 250 hours. [1]

Variants

VJ-24
Unpowered three axis-controlled hang glider version, foot launched and landed. Glide ratio is 9:1 at 20 mph (32 km/h) and minimum sink is 180 fpm. [3]
VJ-24W
Powered version with wheeled landing gear. [1]

Specifications (VJ-24W)

Data from Purdy, Vintage Ultralight Museum and Soaring [1] [2]

General characteristics

Performance

See also

Related Research Articles

Advanced Aeromarine Sierra American glider

The Advanced Aeromarine Sierra was an American high-wing, strut-braced, single-seat, glider that was designed and produced by Advanced Aeromarine, as a kit for amateur construction.

InterPlane Skyboy

The InterPlane Skyboy is a two-seat, side-by-side, high wing, single engine, pusher configuration ultralight aircraft that was manufactured as a completed aircraft by InterPlane Aircraft of Zbraslavice, Czech Republic.

The US Aviation Super Floater is an American high-wing, strut-braced, single-seat glider that was designed by Klaus Hill and Larry Hall and produced by US Aviation initially and later by Wind Walker Aircraft Co.

The US Aviation Cumulus is an American low-wing, single-seat, open cockpit motor glider that was designed by Dave Ekstrom and produced by US Aviation, supplied in kit form for amateur construction.

The US Aviation CAVU is an American high-wing, strut-braced, single-seat, open cockpit, single engine in pusher configuration, ultralight aircraft that was designed and produced by AeroDreams of Manchester, Tennessee, but marketed by US Aviation of St Paul, Minnesota under their brand name. The aircraft was supplied as a kit for amateur construction.

ProFe D-8 Moby Dick

The ProFe D-8 Moby Dick is a family of Czech pusher configuration, parasol wing, strut-braced, V-tailed, motor gliders that was designed and produced by ProFe. The aircraft is named for the great white whale of Herman Melville's novel of the same name and was supplied as a kit for amateur construction.

The Danieli Piuma is a family of Italian high-wing, strut-braced, pusher configuration single-seat motor gliders that was designed by Tiziano Danieli of Schio and supplied as plans for amateur construction.

The Bailey-Moyes Tempest, is an Australian-American high-wing, strut-braced, single-seat, microlift glider that was designed by Bob Bailey of Florida, United States and produced by Moyes Microlights of Waverley, New South Wales, Australia.

The Alpaero Sirius, also called the Noin Sirius, is a French high-wing, strut-braced, pod-and-boom, cruciform tail, single-seat motor glider that was designed by Claude Noin and produced by his company, Alpaero of Châteauvieux, Hautes-Alpes. It was available as plans for amateur construction and also as a kit, but has been discontinued.

The Cloudbuster Ultralights Cloudbuster is an American ultralight aircraft that was designed and produced by the Cloudbuster Ultralights Company of Sarasota, Florida in the early 1980s. The aircraft was supplied as a kit for amateur construction.

The St Croix Excelsior is an American ultralight aircraft that was designed by Chad Wille and Charles Wille, produced by St Croix Aircraft of Corning, Iowa and first flown in 1980. The aircraft was supplied in the form of plans for amateur construction with some hard-to-make parts available as well as partial kits.

The Delta Sailplane Honcho and Delta Sailplane Nomad are a family of American ultralight aircraft and motorgliders that were derived from the Volmer VJ-24W SunFun and produced by the Delta Sailplane Corporation. The aircraft were supplied as kits for amateur construction.

Cascade Kasperwing I-80

The Cascade Kasperwing I-80 is an American ultralight flying wing motorglider that was designed by Witold Kasper and Steve Grossruck. It was produced by Cascade Ultralites and introduced in 1976. The aircraft was supplied as a kit for amateur construction.

The Worldwide Ultralite Spitfire is an American ultralight aircraft that was designed by Fred Bell and manufactured by Worldwide Ultralite Industries and later by Don Ecker and Air Magic Ultralights of Houston, Texas. The aircraft was supplied as a kit for amateur construction.

The Thor T/A is a Canadian ultralight aircraft that was designed by Thorsten B. Strenger and produced by Thor Air of Weston, Ontario. The aircraft was supplied as a kit for amateur construction.

The North Wing ATF is an American single-seat flying wing ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.

The Aurore MB 04 Souris Bulle is a French ultralight aircraft, designed by Michel Barry and produced by Aurore Sarl of Sauvagnon. The aircraft is supplied as a kit or as plans for amateur construction.

The Apollo Jet Star is a Hungarian ultralight trike, designed and produced by Apollo Ultralight Aircraft of Eger. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

The Fly Hard Trikes SkyCycle is an American ultralight trike, designed by Mike Theeke and produced by Fly Hard Trikes of Wildwood, Georgia. The aircraft is supplied as a complete ready-to-fly-aircraft and several hundred have been completed and flown.

Eurofly Fire Fox

The Eurofly Fire Fox is an Italian ultralight aircraft designed and produced by Eurofly srl of Galliera Veneta. The aircraft is supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.

References

  1. 1 2 3 4 5 6 7 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 315. BAI Communications, July 1998. ISBN   0-9636409-4-1
  2. 1 2 Vintage Ultralight Museum (n.d.). "Sun Fun VJ-24W" . Retrieved September 29, 2011.
  3. 1 2 3 Rogers, Bennett: 1974 Sailplane Directory, Soaring Magazine, page 100. Soaring Society of America, August 1974. USPS 499-920
  4. 1 2 3 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page E-43. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.