Wayne Lifestar

Last updated
Wayne Lifestar
Overview
Manufacturer Wayne Corporation
Wayne Wheeled Vehicles
Also calledWelles Lifestar (Canada)
Production1986–1995
Assembly Richmond, Indiana (1986–1992)
Marysville, Ohio (1992–1995)
Designer Wayne Corporation
Body and chassis
Class Type D
Body style school bus
Layout front-engine 4×2
Related Wayne Lifeguard
Powertrain
Engine Diesel
Transmission Automatic
Chronology
PredecessorWayne RE
SuccessorWayne RD-9000 (prototype only)

The Wayne Lifestar is a product line of buses that was manufactured and marketed by Wayne Corporation and its successor company Wayne Wheeled Vehicles from 1986 to 1995. Produced nearly exclusively in a school bus configuration, the Wayne Lifestar used a transit-style body configuration with a front-engine chassis. Marking the return to transit-style production (after an absence of over a decade), the Lifestar adopted the single-piece body stampings of the Wayne Lifeguard in its construction.

Contents

Wayne Corporation manufactured the Lifestar from 1986 to 1992 at its Richmond, Indiana facility. Following the closure and liquidation of Wayne Corporation, Wayne Wheeled Vehicles manufactured the product line from 1993 to 1995 in Marysville, Ohio.

Overview and development

In the late 1960s, Wayne Corporation produced a rear-engine transit-style school bus similar to other major school bus manufacturers. As Wayne did not have the manufacturing equipment or capacity to build the chassis in-house, it sourced its rear-engine chassis from Chevrolet. When General Motors discontinued its Chevrolet/GMC rear-engine bus chassis production in 1973, Wayne was forced to end production of its transit-style school bus in favor of the Lifeguard conventional introduced that year. Beyond 1973, all transit-style buses from Wayne became special-order vehicles for military and GSA (federal government) purchases with chassis outsourced from other manufacturers; the transit-style buses were too expensive to produce at a competitive price as a school bus.

As the 1970s became the 1980s, the school bus industry was in a period of relative turmoil: along with the struggling economy, fewer Americans were school-age than in years past. Innovation and low cost were key to attracting school bus orders. To do so, Wayne Corporation was necessitated to develop a transit-style school bus that could be sold at a lower purchase price; for larger fleets, their higher capacity theoretically allowed for fewer buses per students transported. Named Lifestar, the new vehicle would feature the continuous longitudinal interior and exterior panels of the Lifeguard for the sides and roof, both for safety and for parts commonality.

Prototype development

Identification of an appropriate chassis design from an outside supplier to meet engineering, volume, and cost considerations was essential to the project and the future of Lifestar. In the prototype stage, Wayne developed both front- and rear-engine versions of the Lifestar, as the majority of manufacturers (with the exception of Ward, Crown Coach, and Gillig) offered both configurations.

At the Welles plant in Canada, where many Wayne experimental projects had been done over the years, a rear-engine prototype was constructed, while a front-engine prototype was constructed in Richmond. The final decision was to produce the Lifestar only in the front-engine body style, primarily for cost considerations.

The front-engine bus program proved more successful than rear-engine development efforts, and saw production with several different chassis. The initial production run of Lifestars were of a front engine (FE) design; production began in 1986. A rear-engine model would have been more costly than a front-engine model, and likely would have achieved lower production volumes. Competitors in that market were the Thomas Saf-T-Liner ER and Blue Bird All American RE. Each bus was a premium product; although Thomas built its own chassis for the Saf-T-Liner ER at the time the Lifestar was introduced, production volume for the All American RE was low enough that Blue Bird outsourced its rear-engine chassis until 1988.

First generation (1986–1990)

When introduced for 1986, Wayne Corporation selected the all-new General Motors S7 front-engine bus chassis for the Lifestar body; supported by the GM medium-duty truck service network, the S7 chassis was identified as both a Chevrolet and a GMC (using the steering wheel badging of either brand). The standard powertrain for the S7 chassis was a Chevrolet 366 (6.0L) V8 gasoline V8 (according to 1987 GMC Chassis Brochure), offering an optional Detroit Diesel 8.2L diesel V8 in either naturally aspirated ("Fuel Pincher") or turbocharged configuration.

Along with a chassis sourced from a major manufacturer, the body of the Lifestar was developed to reduce production and maintenance costs, using flat windshield glass (to lower replacement costs) and a nearly flat front bodywork stamping.

From its 1986 launch, the S7 product line was plagued with supply problems. In addition to underpinning the Lifestar, the GM chassis was also adopted by similar product lines from competing bus manufacturers Carpenter and Ward/AmTran. In 1989, General Motors ended production of the S7 product line entirely.

As a temporary solution, Milton H. Smith, a truck and bus dealer and school bus contractor based in Plaistow, New Hampshire (who served as one of the larger Wayne bus dealers in the United States) began to import chassis from South Korea. Essentially gliders with an American-sourced powertrain (a Caterpillar 3208 diesel and an Allison MT643 automatic), the chassis were fitted to the Lifestar with redesigned engine covers to fit the larger Caterpillar engine. Branded as "Asia-Smith" chassis, the venture was ultimately not well-received in U.S. markets and many sat at the Wayne Indiana plant for an extended time awaiting body orders. Due to the supply issues of the GM S-7 affecting other manufacturers, some surplus Asia-Smith chassis were sold off to other manufacturers to be fitted with bus bodies; some were purchased by Ward/AmTran (for the Ward President) and from short-lived startup New Bus Company from Oklahoma (for the New Bus Chickasha FE).

Second generation (1991–1992)

For its 1991 production, Wayne Corporation updated the Lifestar out of necessity. Following the discontinuation of the Caterpillar 3208 engine for road use in the United States, the Asia-Smith chassis was left without an engine. In response, Wayne introduced a third chassis supplier for the Lifestar, shifting to the International 3900FC for 1991 production. Though shared with Ward/AmTran and Carpenter (and Canadian bus manufacturer EMC/Corbeil), the 3900FC provided the Lifestar with a reliable source of chassis production.

The shift to a Navistar-sourced chassis (powered by either a DTA360 or optional DT466 inline-6 turbodiesel) would result in several modifications to the body of the Lifestar. The most visible changes included a 4-piece wrap-around windshield (created by the relocation of the entry door), the introduction of quad headlights, and an all-new grille. The interior saw multiple changes, including the introduction of a Navistar-sourced steering column and instrument panel.

This generation of the Lifestar was only produced for two years, as Richmond Transportation Corporation, then the parent company of Wayne, filed for Chapter 11 bankruptcy and Wayne Corporation was liquidated and sold.

Wayne vs. AmTran

Other body manufacturers also expressed interest in the 3900, and AmTran (still selling buses bearing the Ward brand name) developed a product based upon it, the Ward Senator (which later evolved as the AmTran Genesis); however, AmTran was also working on a rear-engined model using the 3900 components to be fully assembled at its Conway, Arkansas plant utilizing Navistar mechanical components; this saw production as the 1996 AmTran RE. The rear-engine concept promised substantially lower costs than chassis assembled at the Navistar plant at Springfield, Ohio, and in comparison, would put the Wayne Lifestar with the Springfield chassis at a significant price bidding disadvantage in the marketplace.

Third generation (1993–1995)

After Richmond Transportation Corporation's bankruptcy filing and liquidation in 1992, the assets of Wayne were acquired by Harsco Corporation. At the end of 1992, Wayne Wheeled Vehicles (WWV) began production of the Wayne Lifeguard and Lifestar out of Marysville, Ohio.

During the transition, Navistar was replaced as a chassis supplier by heavy-duty vehicle manufacturer Crane Carrier Corporation (CCC), replacing the engine with a Cummins 5.9L inline-6 turbodiesel. In contrast to the previous model revision, the CCC chassis used nearly an identical body as the 1991-1992 Lifestar with the 3900FC, distinguished primarily by the change of powertrain and the replacement of Navistar-sourced components.

Model discontinuation

For 1988 production, Blue Bird introduced the Blue Bird TC/2000. In line with the Lifestar, the TC/2000 was developed to lower production costs over the long-running All American, initially offered in a front-engine configuration and with minimal exterior chrome. While the Lifestar and TC/2000 shared a front-engine design layout, the two model lines differed as the latter was not negatively affected by chassis supply. At the time of its launch, Ward/AmTran had projected that the TC/2000 would secure a full 10% of the U.S. school bus market by 1990.

Wayne continued to struggle for market share in 1990. In mid-June 1990, the Welles plant in Canada was closed.

In early 1991, Navistar International announced that it had purchased a one third of AmTran, the manufacturer of Ward school bus bodies, and one of Wayne's long-time competitors. This was seen by many industry observers as an ominous sign for Wayne's future, as Navistar was its largest supplier of both conventional and Type D chassis. Wayne had no major alliance to guarantee a source of chassis, nor any in-house capacity to do so.

In August 1992, Richmond Transportation Corporation (RTC) was forced to declare bankruptcy. Assets were sold by a federal bankruptcy judge at auction that fall. Wayne, essentially in name only, lived on as Wayne Wheeled Vehicles until 1995 under different ownership.

See also

Related Research Articles

School bus Bus operated by a school or school district for student transport

A school bus is a type of bus owned, leased, contracted to, or operated by a school or school district. It is regularly used to transport students to and from school or school-related activities, but not including a charter bus or transit bus. Various configurations of school buses are used worldwide; the most iconic examples are the yellow school buses of the United States and Canada which are also found in other parts of the world.

The Wayne Corporation was an American manufacturer of buses and other vehicles under the "Wayne" marque. The corporate headquarters were in Richmond, Indiana, in Wayne County, Indiana. During the middle 20th century, Wayne served as a leading producer of school buses in North America.

Thomas Built Buses American bus manufacturer

Thomas Built Buses, Inc. is an American bus manufacturer. Best known for its production of yellow school buses, Thomas produces other bus designs for a variety of usages; currently, its production is concentrated on school buses and activity buses and their commercial derivatives.

Carpenter Body Company Defunct American bus manufacturer

Carpenter Body Works is a defunct American bus manufacturer. Founded in 1918 in Mitchell, Indiana, the company produced a variety of vehicles, with the majority of production consisting of yellow school buses for the United States and Canada.

IC Bus Bus manufacturing company owned by Navistar International

IC Bus is an American bus manufacturer. Headquartered in Lisle, Illinois, IC is a wholly owned subsidiary of Navistar International. Established in 2002 by Navistar through the reorganization of subsidiary manufacturer American Transportation Corporation (AmTran), IC currently produces school buses and commercial-use buses for multiple applications.

Thomas Vista Motor vehicle

The Thomas Vista is a model line of buses that was manufactured by Thomas Built Buses from 1989 to 1998. Produced nearly exclusively as a school bus, the model line was also sold in commercial-use configurations. To improve forward sightlines for drivers, the chassis design of the Vista combines elements of conventional buses and transit-style school buses.

Corbeil is a defunct trade name that has been used in bus manufacturing. From 1936 to 1975, J.H. Corbeil was a manufacturer of bus bodies; Les Enterprises Michel Corbeil was a body manufacturer that specialized primarily in school buses, opened from 1985 to 2007. In 2007, the company was acquired out of bankruptcy by Collins Industries and renamed Corbeil Bus Corporation. Serving as the Canadian equivalent of Collins Bus Corporation, manufacturing was shifted from Quebec to Hutchinson, Kansas.

American Transportation Corporation was an American manufacturer of school bus bodies. Tracing its roots to Ward Body Works, AmTran was formed in 1980 following the 1979 bankruptcy of Ward to continue bus production. In 1991, the company became a subsidiary of Navistar International, leading to a series of acquisitions of school bus body manufacturers by chassis suppliers during the 1990s.

The Wayne Busette is a minibus that was assembled by Wayne Corporation from 1973 to 1990. During its production, many examples of the Busette were produced as school buses. One of the first examples produced with a cutaway van chassis, the Busette mated a purpose-built school bus body with a dual rear-wheel van chassis. In North America, this configuration is now preferred by manufacturers for many other types of minibuses in addition to school buses.

Chevrolet/GMC B series Motor vehicle

The Chevrolet and GMC B series was a series of cowled chassis that were produced by General Motors. Produced across three generations from 1966 to 2003, the model line was a variant of medium-duty trucks marketed under the Chevrolet and GMC nameplates. Initially derived from the medium-duty C/K series, later examples were derived from the GMT530 architecture.

Thomas Saf-T-Liner Motor vehicle platform

The Thomas Saf-T-Liner is the name of the transit-style school bus product line produced by Thomas Built Buses. Introduced in 1978, the Saf-T-Liner marked the transition to in-house chassis production by Thomas. In addition to school bus applications, variations of the Saf-T-Liner have been produced as activity buses, specialty vehicles, and commercial/transit buses. It can also be used to describe the Saf-T-Liner C2 or Saf-T-Liner FS-65, but they are not considered part of the Saf-T-Liner family.

Blue Bird Vision Motor vehicle

The Blue Bird Vision is a bus that is manufactured and marketed by Blue Bird Corporation in North America and exported worldwide. In production since 2003, the Vision became the first cowled-chassis bus built on a proprietary chassis designed and manufactured by the same company. While it is sold primarily in a school bus configuration, the Blue Bird Vision is also offered with various commercial and specialty seating and design configurations.

International 3000 Bus chassis manufactured by Navistar International

The International 3000 Series is a transit-style bus chassis manufactured by Navistar International, used for school bus and commercial bus applications. In production since 1990, it has been produced in both front and rear-engine configurations.

Blue Bird TC/2000 Motor vehicle

The Blue Bird TC/2000 is a product line of buses that was produced by the American manufacturer Blue Bird Corporation from 1987 to 2003. Introduced as a second transit-style product range alongside the Blue Bird All American, the TC/2000 was produced in front-engine and rear-engine layouts. While produced primarily as a yellow school bus, Blue Bird offered the TC/2000 in commercial configurations and numerous custom-built variants. For commercial use, Blue Bird badged the model line as the TC/2000 or the APC 2000.

The bus chassis variant of the International S series is a cowled bus chassis that was produced by International Harvester from 1979 to 2001. Produced primarily for school bus applications, the chassis was also produced for other applications, including commercial-use buses and cutaway-cab buses. In addition, the cowled chassis formed the basis for front-engine and rear-engine stripped chassis produced for bus applications.

Blue Bird All American Motor vehicle

The Blue Bird All American is a series of buses produced by American bus manufacturer Blue Bird Corporation since 1948. Originally developed as a yellow school bus, versions of the All American have been designed for a wide variety of applications, ranging from the Blue Bird Wanderlodge luxury motorhome to buses for law enforcement use.

Thomas Minotour Motor vehicle

The ThomasMinotour is a bus body manufactured by Thomas Built Buses since 1980. The smallest vehicle sold by the company, the Minotour is a bus body designed for cutaway van chassis. Primarily sold for school bus usage, the Minotour is also produced as a MFSAB or in specialized configurations specified by the customer.

Wayne Wheeled Vehicles (WWV) was a tradename of a division of a vehicle manufacturer that specialized primarily in the production of school buses. It was owned by Harsco Corporation, who purchased the rights to use the Wayne brand name, certain product rights, as well as parts and tooling during the liquidation of assets of the Wayne Corporation in late 1992.

The Blue Bird Micro Bird is a bus body produced in the United States and Canada by Blue Bird Corporation. First introduced in 1975, the Micro Bird body is combined with a cutaway van chassis, with passenger capacity ranging from 10 to 30 passengers. While most examples are produced as a school bus, the Micro Bird has been sold in various configurations, including commercial-use minibuses and as a MFSAB. MFSABs are alternatives to 15-passenger vans; examples have come into use by child care centers and other organizations due to updated safety regulations.

International TerraStar Motor vehicle

The International TerraStar is a product line of medium duty trucks that was manufactured by International Trucks from 2010 to 2015. The smallest conventional-cab truck ever produced by Navistar, the TerraStar is a Class 5 medium-duty truck. Although not officially designated by the company as the replacement for the CityStar LCF cabover, the TerraStar is of similar dimensions and GWVR.

References