West Pharmaceutical Services explosion

Last updated
Remains of the West Pharmaceutical Services facility's rubber compounding unit Destroyed rubber compounding unit at West Pharmaceutical Services facility, Kinston.png
Remains of the West Pharmaceutical Services facility's rubber compounding unit

The West Pharmaceutical Plant explosion was an industrial disaster that occurred on January 29, 2003, at the West Pharmaceutical Plant in Kinston, North Carolina, United States. Six people were killed and thirty-six people were injured when a large explosion ripped through the facility. Two firefighters were injured in the subsequent blaze. [1] The disaster occurred twelve years and 170 miles (270 km) from the 1991 Hamlet chicken processing plant fire, North Carolina's second-worst industrial disaster.

Contents

Background

The West Pharmaceutical Plant was owned by West Pharmaceutical Services, [2] and opened in the early 1980s. [3] The plant employed 255 people with wages of between $12 and $14, some of the highest in the area. [3] The facility's purpose was trifold; to manufacture syringe plungers, to manufacture intravenous components and rubber compounding. [2] In October 2002, an inspector found a total of 22 "serious violations" at the plant, but said that these were routine findings for numerous industrial premises in North Carolina. [3] West Pharmaceutical Services was fined $10,000 as a result. [3]

As part of the manufacturing process, rubber strips were doused in a solution of polyethylene powder and water to reduce their stickiness and then blown dry. This led to polyethylene dust being dispersed around the plant. While dust was regularly cleaned from visible surfaces in the production area, some was sucked in by air intakes and collected above the facility's dropped tile ceiling. [4]

Event

The plant was ripped apart by a violent explosion. Witnesses reported hearing "a sound like rolling thunder", as what was later determined to be a chain reaction of explosions rapidly propagated. [5] The shock wave broke windows at distances of up to 1,000 feet (300 m) away, and propelled debris as far as 2 miles (3.2 km), some of which started additional fires in wooded areas at this distance. [1] [6] The blast could be felt 25 miles (40 km) away. [1] A student at a school over half a mile away was injured by glass fragments. [4] [7]

The explosion severed the plant's sprinkler system water supply, rendering it inoperable. [8] A large fire raged for two days at the site of the plant. [1] Damage to the plant was estimated to cost around $150 million. [6] One half of the 150,000-square-foot (14,000 m2) plant was completely destroyed. [9]

Investigation

The investigation initially focused on two separate possibilities: a failure of a newly installed gas line, and a large dust explosion. [3] From an early stage, the main theory pursued was that of the dust explosion. [6] Within 24 hours of the explosion, the Chemical Safety and Hazard Investigation Board, who conducted the investigation, had determined from eyewitness interviews that the explosion originated in an area known as the "Automated Compounding System". [6] This was a synthetic rubber-processing system. It was the site for mixing, rolling, coating, and drying of a type of rubber called polyisoprene. [6] The process adds oils and fillers to the material, as well as creating significant quantities of dust. [6] Therefore, the working theory from an early point was the rubber dust explosion theory. [6]

One particular machine was identified. It coated strips of rubber by dipping in "Acumist", a finely powdered grade of combustible polyethylene. [9] This machine had operated for 24 hours a day, five or six days a week, since 1987. [9] The spaces around the machine, including a suspended ceiling 3 feet (0.91 m) above the machine, were regularly cleaned by the factory's maintenance personnel. [9] But they were unaware that ventilation systems within the room pulled the dust up into the ceiling, where a layer 0.25 to 0.5 inches (6.4 to 12.7 mm) thick had accumulated. [9] Several weeks prior to the accident, maintenance personnel did notice a thick coating of dust on surfaces above the suspended ceiling, but failed to realize the imminent danger it posed. [5]

The investigation determined that a major explosion occurred when something disturbed the dust, creating a cloud, which ignited. [9] The investigation was unable to determine what disturbed the dust or what ignited it, [9] due to the extensive damage at the plant. [10] However, it is known that the machine had suffered multiple internal fires, including one that was powerful enough to blow off the mixer door. [11] Four other theories were developed regarding possible causes: a batch of rubber that overheated and ignited; an electrical ballast or light fixture that ignited accumulated dust; a spark caused by a possible electrical fault; or ignition of dust in a cooling air duct feeding an electric motor. [10]

It was determined that West had in their possession material safety data sheets (MSDSs) supplied by the powder manufacturer that warned of the danger of such explosions, but did not refer to them. Instead, they relied on the MSDS supplied by Crystal Inc. PMC, who supplied West with a polyethylene-water slurry. However, this second MSDS neglected to mention the hazard posed by dust, as it was not thought to be hazardous once the slurry had dried. [10]

The final report into the disaster was highly critical of West, saying that the four "root causes" of the disaster were West's inadequate engineering assessment for combustible powders, inadequate consultation with fire safety standards, lack of appropriate review of MSDSs, and inadequate communication of dust hazards to workers. It also criticized West for not investigating a minor incident in which dust ignited during welding, from which West could have realized the imminent danger posed by the dust. [10]

Recommendations

The final report made a number of recommendations to prevent a recurrence. A brief summary:

Aftermath

Less than a week after the disaster, the local county commission voted to donate $600,000 to West to rebuild. [3] A local landlord also offered temporary free office space to company executives. [3]

On February 20, 2003, a private memorial service entitled "A Service of Healing and Remembrance" was held at Lenoir Community College, Kinston, for surviving plant employees and their families. [12]

The plant was so severely damaged that it had to be demolished and rebuilt from scratch. [13]

One year into the investigation, the disaster, coupled with the CTA Acoustics fiberglass insulation manufacturing plant explosion and the Hayes Lemmerz automotive parts plant explosion (with death tolls of seven and one respectively, also involving dust explosions in 2003), prompted the Chemical Safety and Hazard Investigation Board (CSB) to conduct a study into the number and severity of dust explosions throughout the United States over several decades. The board's chairman, Carolyn Merritt, described the accidents as collectively raising "safety questions of national significance... Workers and workplaces need to be protected from this insidious hazard". The study reviewed how the dust explosion hazard was controlled by regulatory codes, standards, and good operating practices, and also compared the US response to other nations' solutions to the same problem, [14] in order to produce a review of potential initiatives to reduce the occurrence of industrial dust explosions. [1] Lawsuits followed, with Scott Scurfield providing litigation defense for West Pharmaceutical Services. [15]

In 2004, Science Channel broadcast a documentary about the explosion and subsequent investigation, titled Failure Analysis: Dust Explosion. The CSB expressed their approval of the documentary, saying that it would "help spread the word about the dangers of combustible dust in the workplace". [16]

See also

Related Research Articles

<span class="mw-page-title-main">Static electricity</span> Imbalance of electric charges within or on the surface of a material

Static electricity is an imbalance of electric charges within or on the surface of a material. The charge remains until it can move away by an electric current or electrical discharge. The word "static" is used to differentiate it from current electricity, where an electric charge flows through an electrical conductor.

Coal dust is a fine-powdered form of coal which is created by the crushing, grinding, or pulverization of coal rock. Because of the brittle nature of coal, coal dust can be created by mining, transporting, or mechanically handling it.

A chemical accident is the unintentional release of one or more hazardous chemicals, which could harm human health and the environment. Such events include fires, explosions, and release of toxic materials that may cause people illness, injury, or disability. Chemical accidents can be caused for example by natural disasters, human error, or deliberate acts for personal gain. Chemical accidents are generally understood to be industrial-scale ones, often with important offsite consequences. Unintended exposure to chemicals that occur at smaller work sites, as well as in private premises during everyday activities are usually not referred to as chemical accidents.

<span class="mw-page-title-main">Texas City refinery explosion</span> 2005 deadly refinery accident

The Texas City refinery explosion occurred on March 23, 2005, when a flammable hydrocarbon vapor cloud ignited and violently exploded at the isomerization process unit of the BP oil refinery in Texas City, Texas, killing 15 workers, injuring 180 others and severely damaging the refinery. All the fatalities were contractors working out of temporary buildings located close to the unit to support turnaround activities. Property loss was $200 million. When including settlements, costs of repairs, deferred production, and fines, the explosion is the world's costliest refinery accident.

<span class="mw-page-title-main">Electrical equipment in hazardous areas</span> Electrical equipment in places where fire or explosion hazards may exist

In electrical and safety engineering, hazardous locations are places where fire or explosion hazards may exist. Sources of such hazards include gases, vapors, dust, fibers, and flyings, which are combustible or flammable. Electrical equipment installed in such locations can provide an ignition source, due to electrical arcing, or high temperatures. Standards and regulations exist to identify such locations, classify the hazards, and design equipment for safe use in such locations.

Mixtures of dispersed combustible materials and oxygen in the air will burn only if the fuel concentration lies within well-defined lower and upper bounds determined experimentally, referred to as flammability limits or explosive limits. Combustion can range in violence from deflagration through detonation.

A fire class is a system of categorizing fire with regard to the type of material and fuel for combustion. Class letters are often assigned to the different types of fire, but these differ between territories; there are separate standards for the United States, Europe (DIN EN2 Classification of fires ISO3941 Classification of fires, and Australia. The fire class is used to determine the types of extinguishing agents that can be used for that category.

<span class="mw-page-title-main">U.S. Chemical Safety Board</span> Independent U.S. federal agency

The U.S. Chemical Safety and Hazard Investigation Board (USCSB), generally referred to as the Chemical Safety Board (CSB), is an independent U.S. federal agency charged with investigating industrial chemical accidents. Headquartered in Washington, D.C., the agency's board members are appointed by the president and confirmed by the United States Senate. The CSB conducts root cause investigations of chemical accidents at fixed industrial facilities.

<span class="mw-page-title-main">Combustibility and flammability</span> Ability to easily ignite in air at ambient temperatures

A combustible material is a material that can burn in air under certain conditions. A material is flammable if it ignites easily at ambient temperatures. In other words, a combustible material ignites with some effort and a flammable material catches fire immediately on exposure to flame.

<span class="mw-page-title-main">Dust explosion</span> Rapid combustion of fine particles suspended in the air

A dust explosion is the rapid combustion of fine particles suspended in the air within an enclosed location. Dust explosions can occur where any dispersed powdered combustible material is present in high-enough concentrations in the atmosphere or other oxidizing gaseous medium, such as pure oxygen. In cases when fuel plays the role of a combustible material, the explosion is known as a fuel-air explosion.

On 23 October 1989 at approximately 1:05 PM Central Daylight Time, a series of explosions occurred at Phillips Petroleum Company's Houston Chemical Complex (HCC) in Pasadena, Texas, near the Houston Ship Channel. The initial blast registered 3.5 on the Richter scale, and the resulting fires took 10 hours to bring under control, as efforts to battle the fire were hindered due to damaged water pipes for the fire hydrants from the blast. The initial explosion was found to have resulted from a release of extremely flammable process gasses used to produce high-density polyethylene, a plastic used for various consumer food container products. The US Occupational Safety and Health Administration fined Phillips Petroleum Company $5,666,200 and fined Fish Engineering and Construction, inc, the maintenance contractor, $729,600. The event killed 23 employees and injured 314.

<span class="mw-page-title-main">2008 Georgia Imperial Sugar refinery explosion</span> Fatal industrial disaster

On 7 February 2008, fourteen people were killed and thirty-six injured during a dust explosion at a refinery owned by Imperial Sugar in Port Wentworth, Georgia, United States. Dust explosions had been an issue of concern among U.S. authorities since three fatal accidents in 2003, with efforts made to improve safety and reduce the risk of reoccurrence.

<span class="mw-page-title-main">Hydrogen safety</span> Procedures for safe production, handling and use of hydrogen

Hydrogen safety covers the safe production, handling and use of hydrogen, particularly hydrogen gas fuel and liquid hydrogen. Hydrogen possesses the NFPA 704's highest rating of four on the flammability scale because it is flammable when mixed even in small amounts with ordinary air. Ignition can occur at a volumetric ratio of hydrogen to air as low as 4% due to the oxygen in the air and the simplicity and chemical properties of the reaction. However, hydrogen has no rating for innate hazard for reactivity or toxicity. The storage and use of hydrogen poses unique challenges due to its ease of leaking as a gaseous fuel, low-energy ignition, wide range of combustible fuel-air mixtures, buoyancy, and its ability to embrittle metals that must be accounted for to ensure safe operation.

<span class="mw-page-title-main">West Pharmaceutical Services</span> American healthcare company

West Pharmaceutical Services, Inc. is a designer and manufacturer of injectable pharmaceutical packaging and delivery systems. Founded in 1923 by Herman O. West and J.R. Wike of Philadelphia, the company is headquartered in Exton, Pennsylvania. In its early years of development, West produced rubber components for packaging injectable drugs, providing a sterile environment for the producers of penicillin and insulin.

<span class="mw-page-title-main">2009 Cataño oil refinery fire</span> Explosion and fire in Bayamón, Puerto Rico

The 2009 Cataño oil refinery fire, also known as the CAPECO explosion, was a fire that began with an explosion on October 23, 2009, and was extinguished on October 25 at the Caribbean Petroleum Corporation (CAPECO) oil refinery and oil depot in Bayamón, Puerto Rico. While the fire and subsequent explosion occurred close to the city of Cataño, it technically occurred within the borders of Bayamón, even though Cataño was more affected by fumes and evacuation. There were no fatalities, but 3 people were injured.

<span class="mw-page-title-main">Industrial fire</span>

An industrial fire is a type of industrial disaster involving a conflagration which occurs in an industrial setting. Industrial fires often, but not always, occur together with explosions. They are most likely to occur in facilities where there is a lot of flammable material present. Such material can include petroleum, petroleum products such as petrochemicals, or natural gas. Processing flammable materials such as hydrocarbons in units at high temperature and/or high pressure makes the hazards more severe. Facilities with such combustible material include oil refineries, tank farms, natural gas processing plants, and chemical plants, particularly petrochemical plants. Such facilities often have their own fire departments for firefighting. Sometimes dust or powder are vulnerable to combustion and their ignition can cause dust explosions. Severe industrial fires have involved multiple injuries, loss of life, costly financial loss, and/or damage to the surrounding community or environment.

<span class="mw-page-title-main">West Fertilizer Company explosion</span> 2013 explosion of ammonium nitrate in Texas, USA

On April 17, 2013, an ammonium nitrate explosion occurred at the West Fertilizer Company storage and distribution facility in West, Texas, United States, while emergency services personnel were responding to a fire at the facility. Fifteen people were killed, more than 160 were injured, and more than 150 buildings were damaged or destroyed. Investigators confirmed that ammonium nitrate was the material that exploded. On May 11, 2016, the Bureau of Alcohol, Tobacco, Firearms and Explosives stated that the fire had been deliberately set. That finding has been disputed.

<span class="mw-page-title-main">2010 Tesoro Anacortes Refinery disaster</span>

The 2010 Tesoro Anacortes Refinery disaster was an industrial accident that occurred at the Tesoro Anacortes Refinery in Anacortes, Washington on April 2, 2010. Seven workers received fatal burns in an explosion and ensuing fire when a heat exchanger violently ruptured after a maintenance restart.

<span class="mw-page-title-main">Class B fire</span> Class of fire

In fire classes, a Class B fire is a fire in flammable liquids or flammable gases, petroleum greases, tars, oils, oil-based paints, solvents, lacquers, or alcohols. For example, propane, natural gas, gasoline and kerosene fires are types of Class B fires. The use of lighter fluid on a charcoal grill, for example, creates a Class B fire. Some plastics are also Class B fire materials.

Fugitive dust is an environmental air quality term for very small particles suspended in the air, primarily mineral dust that is sourced from the soil of Earth's pedosphere. A significant volume of fugitive dust that is visible from a distance is known as a dust cloud, and a large dust cloud driven by a gust front is known as a dust storm.

References

  1. 1 2 3 4 5 In Final Report on West Pharmaceutical Explosion, CSB Finds Inadequate Controls for Dust Hazards, Calls on North Carolina to Strengthen Fire Code on Combustible Dust Archived 2007-04-06 at the Wayback Machine - Chemical Safety and Hazard Investigation Board press release - Obtained April 25, 2007.
  2. 1 2 West Pharmaceutical Services Provides Update on Plant Explosion - findarticles.com - Obtained April 20, 2007.
  3. 1 2 3 4 5 6 7 Jonsson, Patrick (February 3, 2003). "Lessons from a factory fire". The Christian Science Monitor. Retrieved September 23, 2023.
  4. 1 2 "Dust Explosion at West Pharmaceutical Services" (PDF). CSB Investigation Digest. United States Chemical Safety Board. April 2005. Retrieved September 23, 2023.
  5. 1 2 Preliminary Findings Confirm Blast at West Pharmaceutical Services in Kinston, NC, Was a Dust Explosion Fueled by Plastic Powder Used in Manufacturing Archived 2007-04-06 at the Wayback Machine - Chemical Safety and Hazard Investigation Board Press Release - Obtained April 21, 2007.
  6. 1 2 3 4 5 6 7 CSB Team Focuses on Rubber Blending Area in North Carolina Explosion Archived 2007-04-06 at the Wayback Machine - Chemical Safety and Hazard Investigation Board Press Release - Obtained April 21, 2007.
  7. "At Least Three People Killed, 37 Injured In Explosion At Kinston Pharmaceutical Plant". WRAL-TV. Capitol Broadcasting Company. 29 January 2003. Retrieved September 23, 2023.
  8. CSB Investigation Report 2004, p. 39.
  9. 1 2 3 4 5 6 7 Federal board urges North Carolina make NFPA 654 mandatory after fatal plant explosion [ permanent dead link ] - NFPA - Obtained April 21, 2007.
  10. 1 2 3 4 5 6 7 8 9 In Final Report on West Pharmaceutical Explosion, CSB Finds Inadequate Controls for Dust Hazards, Calls on North Carolina to Strengthen Fire Code on Combustible Dust Archived 2007-04-06 at the Wayback Machine - CBS press release - Obtained April 25, 2007.
  11. CSB Team Finds Several Possible Sources of Explosive Dust at Destroyed N.C. Medical Plant Archived 2007-04-06 at the Wayback Machine - Chemical Safety and Hazard Investigation Board Press Release - Obtained April 21, 2007.
  12. West Pharmaceutical Services Announces Kinston Plant Memorial Service and Kinston Employee Fund. - Goliath - Obtained April 21, 2007.
  13. Press Release "Statement of CSB Investigations Manager Stephen Selk, P.E., Updating the Public on the Investigation of the Imperial Sugar Company Explosion and Fire, Savannah, Georgia". U.S. Chemical Safety and Hazard Investigation Board. 2008-04-17. Archived from the original on 2008-05-13. Retrieved 2008-06-21.
  14. CSB Considers National Safety Issues as West Pharmaceutical Investigation Continues One Year after Explosion Archived 2007-04-06 at the Wayback Machine - Chemical Safety and Hazard Investigation Board press release - Obtained April 25, 2007.
  15. http://www.spoke.com/info/p6ITIt3/ScottScurfield%5B%5D
  16. The Science Channel to Broadcast Documentary on CSB Dust Explosion Investigation Nov. 5, 2004, 9 p.m. Archived 2007-04-06 at the Wayback Machine - Chemical Safety and Hazard Investigation Board press release - Obtained April 28.

Further reading