King Bird | |
---|---|
Role | three passenger transport |
National origin | US |
Manufacturer | Western Airplane Co., Chicago |
First flight | late 1926-January 1927 |
Number built | 1 |
Unit cost | $2,500 [1] |
The Western Airplane King Bird, named after the tyrant flycatcher (Western) Kingbird, was a 1920s US civil transport accommodating three passengers in open cockpits. Only one was built.
The King Bird was a single bay biplane with wings of rectangular plan. The areas of the upper and lower wings were equal but the lower span was 3 ft (0.91 m) greater as they were attached to the fuselage rather than joined directly. They were braced together by inward-leaning, parallel pairs of interplane struts and supported over the fuselage on short, inverted-V cabane struts, producing a 5 ft (1.5 m) gap with 10 in (250 mm) stagger. Only the lower wing was set with dihedral (3°). Ailerons on upper and lower wings were externally interconnected. [2]
The King Bird's fuselage had a welded steel tube structure, with the engine on a bolt-on forward frame so that various types could be fitted. The prototype was equipped with a readily available Curtiss OX-5, a 90 hp (67 kW), water-cooled V-8. Each bank of cylinder heads had its own cowling and long exhaust pipes extended away from and below the fuselage. There were two open cockpits, each with bench seats for two, the forward one under the upper trailing edge. It was normally flown from the port side, rear seat but a second set of controls could be added to the other rear seat for pilot training. The elevator was ground adjustable, though production aircraft would have offered an in-flight adjustable option. The rounded, balanced rudder also had a steel tube structure. [2]
The King Bird's fixed undercarriage was conventional for the time, with wire-spoked, rubber-tyred wheels on a single axle which was mounted on short main legs with trailing drag struts. [2]
The King Bird was first flown before February 1927. By then it had been flown by several pilots, who commented on its good handling and quick rate of climb after take-off. [2] Despite the good reports, only one was built. [1]
Data from Aero Digest (1927) [2]
General characteristics
Performance
The Aero A.23 was a Czechoslovakian airliner of the 1920s. Aero Vodochody had produced the first Czech airliner, the A.10, four of which had served with ČSA, the national airline. The A.23, another biplane, was bigger, more powerful and could carry more passengers.
The Indraéro Aéro 30 is a single seat, single engined sports biplane designed in France in the late 1960s. Only one was built.
The Burnelli RB-1 was a US twin engine biplane airliner prototype from 1920, incorporating a lifting body fuselage.
The Stolp-Adams SA-100 Starduster is a U.S. single seat sport biplane designed to be built from plans supplied by Aircraft Spruce & Specialty Co. Though the first flight was in 1957, Stardusters continue to be built and flown.
The Hovey Delta Bird is an American ultralight aircraft that was designed by Bob Hovey in 1982 and supplied as plans for amateur construction.
The Caproni Ca.125 was a single-engine, tandem two-seat, touring biplane built in Italy in 1933. It could be operated either as a landplane or seaplane.
The Curtiss Model 22 Cox Racers were two specialised racing aircraft built by the American Curtiss Aeroplane and Motor Company. The type was flown as a monoplane, biplane and triplane.
The Hanriot H.26 was a French single seat fighter aircraft prototype completed in 1923. Only one was built.
The Potez 26 was a single seat fighter aircraft designed and flown in France in the mid-1920s. It did not reach production.
The Potez 27 was a French reconnaissance biplane first flown in 1924. 175 were operated by the Polish Airforce, most built in Poland by PWS under licence. Others went to Romania, where they were also used as light bombers.
The Descamps 17 A.2 was a two-seat reconnaissance fighter built under a French government programme of 1923. Two versions, with different engines, were tested and six examples were built under licence by Caudron as the Caudron C.17 A.2.
The de Marçay Limousine was a two-seat French touring biplane introduced at the 1919 Paris Aero Salon. A smaller but otherwise very similar single-seater was also there.
The Les Mureaux 3 C.2 and Les Mureaux 4 C.2 were French two seat, parasol winged fighters, flown in 1927-8, which differed only in their engines. They were developed into near identical army co-operation types, the ANF Les Mureaux 130 A.2 and ANF Les Mureaux 131 A.2, in 1929-31.
The Heinkel HD 20 was a twin engine, three seat German biplane built in 1926 for civil survey work.
The Aerial Service Mercury Senior, Aerial Mercury Senior or just Mercury Senior was a US biplane mailplane designed to operate at night between New York City and Chicago. A different, smaller, lower wing improved its performance for daytime flights. One was built and used by the United States Post Office Department.
The Aerial Engineering Corporation Standard 6W-3 was a commercial transport modification of the US Standard J-1 biplane military trainer aircraft, with new wings, engine and accommodation for four passengers. First flown in 1925, it was built in small numbers.
The Skraba S.T.3 was a two-seat Polish biplane built in 1928. It was the first all-metal aircraft designed in Poland; only one was completed.
The Thulin E was a Swedish reconnaissance aircraft built in the late 1910s.
The Johnson Twin-60 was a small, two seat biplane intended for private owners. It had twin engines for safety and the performance and undercarriage designed for short and rough field use. Despite its refinements only one was definitely built
The NAS Air King was a US light biplane transport aircraft designed in 1926 to carry three passengers in two open cockpits. Only one was built but in 1928 it was revised to carry two passengers and was more successful, with over twenty produced.