Western Electric (tube manufacturer)

Last updated

Western Electric Export Corporation (or simply Western Electric) is a manufacturer of vacuum tubes and high end audio gear. Based in Rossville, Georgia, the company builds an ultra-premium version of the 300B electron tube. It traces its roots to 1872 with the Bell Telephone Company and the original Western Electric. The original AT&T-based company was shut down in 1984. The successor was started in 1995, when AT&T granted Charles G. Whitener (Westrex Corporation) a license to the trademark and intellectual property of the original Western Electric company. [1] In January of 2007 Western Electric announced the acquisition of the assets of former vacuum tube factory Ei Niš from Serbia. [2] The company has announced it will manufacture vacuum tubes for musical instruments, such as electric guitars.

Contents

300B

Few factories make tubes of any kind as the market for these devices is small. Tubes have generally been replaced by transistors, which are smaller, much more efficient, produce less heat and are less expensive. However, there still exists a few markets for tubes, such as high end audio reproduction and many electric guitar amplifiers. The product line consists of solely the 300B, which was designed for use in telephone amplification in the 1930s. By the 1980s, they found use by audiophiles. Western Electric's tubes are considered "ultra-premium", designed for audiophiles who want the best and are willing to pay for it. In 2020, the price for a matched pair of these single-ended tubes was $1499, while a matched quad cost over twice as much. [3]

Guitar amplifier tubes

In March of 2022, Western Electric announced it would soon be producing tubes for the guitar tube amplifier market including the 6L6, EL34, 6V6, EL84, 12AX7 and others. This comes as most nations have banned imports from Russia because of the 2022 Russian invasion of Ukraine. At the same time, Chinese manufacturing is being phased out, leaving only a single factory in Slovakia (JJ Electronic) as a ready source for these vacuum tubes. The existing 300B tubes are quite different from tubes used in guitar amps, however many parts like the base mounts are identical, as well as the glass being made from the same material.[ citation needed ]

Western Electric also completed a major expansion of their Georgia facility, a two-year undertaking that moved production to the Rossville location and expanded room for production. [4] According to company sources, the jump from making 300B to these other models is not that big a step because of the use of similar materials. The company expects the American-made tubes to be more expensive than compatible tubes from Russia or China. It confirmed that it has no intention of expanding manufacture outside of the United States. [5] [6]

According to a Wired article from March, 2023 the first new U.S. made small signal tubes manufactured will be the type 12AX7. [7]

Other products

In 2022, Western Electric began production of the 91E amplifier system, employing the 300B tube in a single ended configuration. The amplifier is a high-end model designed for audiophiles, costing $15,000 or more. It can produce from 14 to 20 watts (at 8 ohms) per channel. This is considerably more than the standard 10w per channel from a typical 300B amplifier. Like all their products, the amplifier is built in America. [8]

Related Research Articles

<span class="mw-page-title-main">Compactron</span> Type of vacuum tube

Compactrons are a type of vacuum tube, which contain multiple electrode structures packed into a single enclosure. They were designed to compete with early transistor electronics and were used in televisions, radios, and similar roles.

<span class="mw-page-title-main">Vacuum tube</span> Device that controls current between electrodes

A vacuum tube, electron tube, valve, or tube, is a device that controls electric current flow in a high vacuum between electrodes to which an electric potential difference has been applied.

<span class="mw-page-title-main">Audio power amplifier</span> Audio amplifier with power output sufficient to drive a loudspeaker

An audio power amplifier is an electronic amplifier that amplifies low-power electronic audio signals, such as the signal from a radio receiver or an electric guitar pickup, to a level that is high enough for driving loudspeakers or headphones. Audio power amplifiers are found in all manner of sound systems including sound reinforcement, public address, home audio systems and musical instrument amplifiers like guitar amplifiers. It is the final electronic stage in a typical audio playback chain before the signal is sent to the loudspeakers.

The Western Electric Company was an American electrical engineering and manufacturing company officially founded in 1869. A subsidiary of the American Telephone and Telegraph Company for most of its lifespan, it served as the primary equipment manufacturer, supplier, and purchasing agent for the Bell System from 1881 until 1984, when the system was dismantled. The company was responsible for many technological innovations, as well as developments in industrial management.

<span class="mw-page-title-main">Valve amplifier</span> Type of electronic amplifier

A valve amplifier or tube amplifier is a type of electronic amplifier that uses vacuum tubes to increase the amplitude or power of a signal. Low to medium power valve amplifiers for frequencies below the microwaves were largely replaced by solid state amplifiers in the 1960s and 1970s. Valve amplifiers can be used for applications such as guitar amplifiers, satellite transponders such as DirecTV and GPS, high quality stereo amplifiers, military applications and very high power radio and UHF television transmitters.

<span class="mw-page-title-main">Fender (company)</span> American musical instrument manufacturer

<span class="mw-page-title-main">12AX7</span> Miniature high-gain dual triode vacuum tube

12AX7 is a miniature dual-triode 6AV6 vacuum tube with high voltage gain. Developed around 1946 by RCA engineers in Camden, New Jersey, under developmental number A-4522, it was released for public sale under the 12AX7 identifier on September 15, 1947.

<span class="mw-page-title-main">Tungsram</span>

Tungsram was a manufacturing company located in Hungary and known for their light bulbs and electronics. Established in Újpest in 1896, it initially produced telephones, wires and switchboards. The name "Tungsram" is a portmanteau of tungsten and wolfram, the two common names of the metal used for making light bulb filaments. Before becoming nationalized by the Communist government in 1945, the company was the world's third largest manufacturer of light bulbs and radiotubes, after the American General Electric and RCA companies.

Founded by David Hafler and Ed Laurent in Philadelphia, Pennsylvania in 1955, Dynaco was an American hi-fi audio system manufacturer popular in the 1960s and 1970s for its wide range of affordable, yet high quality audio components.. Its best known product was the ST-70 tube stereo amplifier. They also manufactured other tube and solid state amplifiers, preamplifiers, radio tuners and bookshelf loudspeakers. Dynaco was liquidated in 1980, and the trademark is now owned by Radial Engineering Ltd.

<span class="mw-page-title-main">Pentode</span> Vacuum tube with five electrodes

A pentode is an electronic device having five electrodes. The term most commonly applies to a three-grid amplifying vacuum tube or thermionic valve that was invented by Gilles Holst and Bernhard D.H. Tellegen in 1926. The pentode was developed from the screen-grid tube or shield-grid tube by the addition of a grid between the screen grid and the plate. The screen-grid tube was limited in performance as an amplifier due to secondary emission of electrons from the plate. The additional grid is called the suppressor grid. The suppressor grid is usually operated at or near the potential of the cathode and prevents secondary emission electrons from the plate from reaching the screen grid. The addition of the suppressor grid permits much greater output signal amplitude to be obtained from the plate of the pentode in amplifier operation than from the plate of the screen-grid tube at the same plate supply voltage. Pentodes were widely manufactured and used in electronic equipment until the 1960s to 1970s, during which time transistors replaced tubes in new designs. During the first quarter of the 21st century, a few pentode tubes have been in production for high power radio frequency applications, musical instrument amplifiers, home audio and niche markets.

<span class="mw-page-title-main">EL34</span> Vacuum tube (valve)

The EL34 is a thermionic vacuum tube of the power pentode type. The EL34 was introduced in 1955 by Mullard, who were owned by Philips. The EL34 has an octal base and is found mainly in the final output stages of audio amplification circuits; it was also designed to be suitable as a series regulator by virtue of its high permissible voltage between heater and cathode and other parameters. The American RETMA tube designation number for this tube is 6CA7. The USSR analog was 6P27S.

<span class="mw-page-title-main">Sovtek</span> Russian vacuum tube brand

Sovtek is a brand of vacuum tube owned by Mike Matthews's New Sensor Corporation and manufactured in Saratov, Russia. They are often used in guitar amplification and include versions of the popular 12AX7, EL84, EL34, and 6L6 vacuum tubes. Many of the vacuum-tube amplifiers in modern production are factory-fitted with Sovtek valves. Originally, Sovtek guitar amplifier valves were claimed to have been descendants of earlier wartime Russian-made components and carried blast proof capabilities. This, however, was later dispelled as urban myth, attributed to a sales person who promoted early product at music industry trade shows worldwide.

<span class="mw-page-title-main">Single-ended triode</span> Vacuum tube electronic amplifier that uses a single triode to produce an output

A single-ended triode (SET) is a vacuum tube electronic amplifier that uses a single triode to produce an output, in contrast to a push-pull amplifier which uses a pair of devices with antiphase inputs to generate an output with the wanted signals added and the distortion components subtracted. Single-ended amplifiers normally operate in Class A; push-pull amplifiers can also operate in Classes AB or B without excessive net distortion, due to cancellation.

<span class="mw-page-title-main">12AT7</span> Miniature medium-gain dual triode vacuum tube

12AT7 is a miniature 9-pin medium-gain (60) dual-triode vacuum tube popular in guitar amplifiers. It belongs to a large family of dual triode vacuum tubes which share the same pinout, including in particular the very commonly used low-mu 12AU7 and high-mu 12AX7.

A valve audio amplifier (UK) or vacuum tube audio amplifier (US) is a valve amplifier used for sound reinforcement, sound recording and reproduction.

<span class="mw-page-title-main">300B</span> Electron amplifier vacuum tube

In electronics, the 300B is a directly-heated power triode vacuum tube with a four-pin base, introduced in 1938 by Western Electric to amplify telephone signals. It measures 6.4 in (16 cm) high and 2.4 in (6.1 cm) wide, and the anode can dissipate 40 watts thermal. In the 1980s it began to be used increasingly by audiophiles in home audio equipment. The 300B has good linearity, low noise and good reliability; it is often used in single-ended triode (SET) audio amplifiers of about eight watts output. A push-pull pair can output 20 watts.

Amperex Electronic Corporation was a manufacturer of vacuum tubes and semiconductors.

Yaqin is one of the more prolific Chinese manufacturers of valve (tube) based audio equipment. They claim to have "engage [sic] in power amplifier research and production more than 10 years." Despite having several disadvantages compared to modern transistorised equipment, a valve sound is preferred by some commentators as having the most pleasing listening experience but has until recently been typically more expensive than transistorised equipment.

<span class="mw-page-title-main">Manley Laboratories</span> American audio equipment manufacturer

Manley Laboratories, Inc. is an American manufacturer of pro audio equipment, including microphones, signal processors, dynamic range processors, equalizers, converters, and specialized mastering products. Manley is located in Chino, California.

JJ Electronic, s.r.o is a Slovak electronic component manufacturer, and one of the world's remaining producers of vacuum tubes. It is based in Čadca, in the Kysuce region of Slovakia.

References

  1. ↑ "Company History". Western Electric. Retrieved March 24, 2022.
  2. ↑ Wayback Machine, Archived in January 10, 2007. ""Western Electric announces the aqcuisition of the electron tube assets of Ei European Operations"". Archived from the original on 2007-01-10.
  3. ↑ Jackson Maxwell (March 22, 2022). "Amid supply crunch, Western Electric publicly floats expansion into guitar tube manufacturing". Guitar World . Retrieved March 27, 2022.
  4. ↑ Richard Honeycutt (June 8, 2021). "R&D Stories: The Original Western Electric 300B Vacuum Tube Now Shipping Worldwide". Audio Xpress. Retrieved March 27, 2022.
  5. ↑ Cillian Breathnach (March 24, 2022). "Western Electric Confirms Plans to Tackle the Tube Crisis with its Georgia Factory". Guitar.com. Retrieved March 24, 2022.
  6. ↑ Press Release (March 23, 2022). "U.S.-Based Western Electric Considers Expanding Tube Production, Asks Players to Weigh In" . Retrieved March 27, 2022.
  7. ↑ Wired magazine, March 28, 2023.Furchgott, Roy. ""One Mans Quest to Revive the Great American Vacuum Tube"". Wired.
  8. ↑ Marc Phillips (May 30, 2022). "Western Electric 91E - High End 2022". parttimeaudiophile.com. Retrieved May 31, 2022.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.