| Westland Interceptor | |
|---|---|
 | |
| Role | Fighter |
| National origin | United Kingdom |
| Manufacturer | Westland Aircraft |
| Designer | W.E.W. Petter |
| First flight | 1929 |
| Status | Retired |
| Number built | 1 |
The Westland Interceptor was a fighter developed by the British company Westland Aircraft to Air Ministry Specification F.20/27. [1] When tested in 1929 and 1930, it showed unsatisfactory handling characteristics and was rejected by the RAF in favour of the Hawker Fury biplane fighter.
Specification F.20/27 was for a fighter operating in the daylight interception role. The main requirement was that the F.20/27 fighter would be able to overtake, in the shortest possible time, an enemy aircraft passing overhead at 150 mph (240 km/h) at an altitude of 20,000 feet (6,100 metres). [2] This put the emphasis on high speed and rate of climb.
Design work on the Interceptor started in late 1927, and it made its first flight in early 1929, with Lieutenant L. G. Paget at the controls. [3] The Interceptor was a low-wing monoplane with an all-metal structure and wire-braced wings, covered mostly in fabric with the exception of the front fuselage. It had a fixed undercarriage. The single prototype was powered by an uncowled Bristol Mercury IIA, later replaced by a Mercury III. It was armed with two .303-inch (7.7-mm) Vickers Mk.II machine guns, installed in the sides of the fuselage with the breeches within reach of the pilot. The guns were synchronized to fire through the propeller, and heated to improve their operation at high altitude. The RAF had intended to call for four-gun armament in Specification F.20/27, but after an administrative mix-up it was sent out to manufacturers calling for only two guns. [2]
The handling characteristics of the Interceptor have been described as "alarming." [4] In steep turns the elevator became ineffective, and the aircraft was prone to enter a spiral dive or a spin from such flight attitudes. The Mercury II engine suffered from persistent high oil temperatures. Test pilots gave a negative assessment of the Interceptor, causing it to be withdrawn from the F.20/27 competition.
The aircraft continued to fly until 1935, but no orders were placed. Significant aerodynamic modifications were made to improve the handling characteristics, including a considerable increase in the height of the fin and rudder, to improve spin recovery. [3] The troublesome Mercury engine was exchanged for a Bristol Jupiter VII, and later fitted with a Townend ring to reduce drag.
The Interceptor and two of the competing F.20/27 designs, the Vickers Jockey and de Havilland DH.77, were historically important because they were monoplane fighter prototypes, after a long period during which the standard fighter design was a biplane. However, all three were found lacking in overall performance and handling during the test flights, showing that the aircraft designers had failed to reach the project goal. [5] The F.20/27 competition was won by the Hornet, which entered service under the name Hawker Fury.
Data from Airwar. [5]
General characteristics
Performance
Armament
Aircraft of comparable role, configuration, and era
Related lists
The Bristol Bulldog is a British Royal Air Force single-seat biplane fighter designed during the 1920s by the Bristol Aeroplane Company. More than 400 Bulldogs were produced for the RAF and overseas customers, and it was one of the most famous aircraft used by the RAF during the inter-war period.
The Hawker Fury is a British biplane fighter aircraft used by the Royal Air Force in the 1930s. It was a fast, agile aircraft, and the first interceptor in RAF service capable of speed higher than 200 mph. It was the fighter counterpart to the Hawker Hart light bomber.
The Gloster Gauntlet was a single-seat biplane fighter designed and produced by the British aeroplane manufacturer Gloster Aircraft in the 1930s. It was the last fighter to be operated by the Royal Air Force (RAF) to have an open cockpit, and also the penultimate biplane fighter in its service.
The Hawker Heron was the first fighter aircraft designed at Hawker Aircraft with a basically metal structure. Sydney Camm was the chief designer that introduced what became the typical structure for all Hawker aircraft until the introduction of the jet-powered Hawker P.1040. This structure consisted of metal tubes with their ends swaged so that they could be connected to each other by means of "fishplates" and bolts.
The Westland C.O.W. Gun Fighter was an attempt to produce a fighter aircraft armed with a heavy calibre gun. The Coventry Ordnance Works (COW) 37 mm automatic gun was used, which had been developed for this purpose some years earlier.
Pterodactyl was the name given to a series of experimental tailless aircraft designs developed by G. T. R. Hill in the 1920s and early 1930s. Named after the genus Pterodactylus, a well-known type of Pterosaur commonly known as the pterodactyl, all but the first were produced by Westland Aircraft Ltd after Hill joined them.
The Fairey Firefly IIM was a British fighter of the 1930s. It was a single-seat, single-engine biplane of all-metal construction. Built by Fairey Aviation Company Limited, it served principally with the Belgian Air Force throughout the 1930s until the outbreak of World War II.
The Gloster F.5/34 was a British fighter of the 1930s. It was a single-seat, single-engine monoplane of all-metal cantilever construction; the undercarriage was of the tailwheel type with retractable main wheels.
The Hawker P.V.3 was a British single-engined biplane fighter prototype of the 1930s. Only a single example was built, the Gloster Gladiator being selected instead to fulfill the requirement to which it was designed.
The Supermarine Type 224 was an inverted gull-wing monoplane fighter aircraft designed by R.J. Mitchell at Supermarine in response to Air Ministry Specification F.7/30, which sought a fighter for introduction to succeed the Gloster Gauntlet. It was powered by the Rolls-Royce Goshawk engine, which used an experimental evaporative cooling system, and problems with this system, combined with its disappointing performance, led to it being rejected, a contract for production aircraft eventually going to the Gloster Gladiator. It is nevertheless notable because R.J. Mitchell learnt lessons from its failure that were to contribute greatly to his success with the Supermarine Spitfire.
The Gloster SS.35 Gnatsnapper was a British naval biplane fighter design of the late 1920s. Two prototypes were built but the type did not enter production.
The Bristol Type 107 Bullpup was a British fighter aircraft built in the 1920s. It was not selected for squadron service and only the single prototype was built
The Westland Wizard was Westland Aircraft's first attempt to produce a monoplane fighter. The project was privately funded and the prototype design was done in the spare time of the company's engineers. This all happened during 1926, with high-speed performance as the primary goal.
The Bristol Type 148 was a two-seat, single-engine low-wing monoplane built in 1937 to an Air Ministry specification for an army cooperation aircraft. It lost in the competition to the Westland Lysander and did not progress past the two prototypes that were built.
The Vickers Type 279 Venom was a British low-wing monoplane single-seat, single-engined, eight-gun fighter aircraft. It was fast and manoeuvrable but its Bristol Aquila radial engine was underpowered. Together with other designs built to the same specification, which included the Bristol Type 146, Gloster F.5/34, and Martin-Baker MB 2, it was rejected by the Air Ministry and only one Venom was built.
The Vickers Type 151 Jockey was an experimental low-wing monoplane interceptor fighter powered by a radial engine. It was later modified into the Type 171 Jockey II, which had a more powerful engine and detail improvements. Only one was built; it was lost before its development was complete, but the knowledge gained enabled Vickers to produce the more refined Venom.
The de Havilland DH.77 was a prototype British fighter aircraft of the late 1920s. Intended as a fast climbing interceptor for Britain's Royal Air Force, the DH.77 was a lightweight low-wing monoplane powered by a relatively low power engine. Despite excellent performance, only one aircraft was built, the Hawker Fury biplane being preferred.
The Westland F.7/30 was a British fighter prototype. A single prototype was built in 1934, but the type was not put in production because its performance fell far below the RAF's requirements. The Gloster Gladiator won the F.7/30 competition.
The Hawker F.20/27 was a British fighter design built to an Air Ministry specification for an interceptor in the late 1920s. It was a single-seat biplane powered by a radial engine; the very similar but V-12-engined Hawker Fury development proved superior and only one F.20/27 was built.
The Westland Witch was an unsuccessful British bomber prototype, first flown in 1928. Only a single aircraft of this type was built.
Derek N James: "Westland Aircraft Since 1915"