USS Algonquin, completed as El Toro in 1891 for the Southern Pacific Railroad's Morgan Line, was a small harbor tug commissioned by the United States Navy 2 April 1898. Renamed Accomac, after Accomac, Virginia, June 1898, renamed Nottoway in 1918 and, after the Navy adopted alphanumeric hull numbers on 17 July 1920, classified as YT-18, a district tug. On 5 October 1942 the name was cancelled and the tug was simply YT-18 until 1944 when classification was changed to YTL-18, a little harbor tug. Over the years as a Navy tug, from 1898 to 1946, the tug served from Cuba to Boston.
Crescent Shipyard, located on Newark Bay in Elizabeth, New Jersey, built a number of ships for the United States Navy and allied nations as well during their production run, which lasted about ten years while under the Crescent name and banner. Production of these ships began before the Spanish–American War and occurred far before the outbreak of World War I. Arthur Leopold Busch, a recent emigre from Great Britain, started the yard with former Navy Lt. Lewis Nixon in January 1895. Both men previously worked for William Cramp & Sons in Philadelphia. Both Nixon and Busch were regarded to be amongst the best in their respected fields - and what they did at this time - as designers and builders of the latest, most advanced types of ships.
USS Advance (YT-28) was an Advance-class tugboat acquired by the United States Navy for the task of patrolling American coastal waters during the First World War.
Arapaho-class tugboats were oceangoing tugboats designated fleet tugs by the United States Navy during their service in the early half of the 20th century. They were in service during World War I and World War II. Arapaho was built by the Seattle Construction and Drydock Company in Seattle, Washington.
USS Wenonah (YT-148/YTB-148/YTM-148) was a Woban-class district harbor tug which served during World War II in California ports, and continued her service until she was struck by the Navy in 1974. On 17 August 2009, the Wenonah sank while berthed at Treasure Island, CA, and was raised by the floating crane Left Coast Lifter on 28 August 2009.
USS Arapaho (AT-14/YT-121) was an Arapaho-class fleet tug that performed various tugboat services for the United States Navy. She was constructed in Seattle, Washington; however, she spent most of her working career on the U.S. East Coast, primarily at Norfolk, Virginia, and Philadelphia, Pennsylvania.
Hatak (YTB-219), a wooden tug, was originally designated YT-219 and built by Greenport Basin and Construction Company, Long Island, New York; launched 22 July 1944, Mrs. B. L. Lea as sponsor; and placed in service as YTB-219, 18 December 1944.
Iona (YT/YTB/YTM-220), a wooden tugboat originally classified YT-220, was launched by Greenport Basin and Construction Company, Greenport, New York, 26 August 1944; sponsored by Mrs. Martina E. Swanson; and placed in service 2 February 1945. She was the second United States Navy ship of that name.
The Type V ship is a United States Maritime Commission (MARCOM) designation for World War II tugboats. Type V was used in World War II, Korean War, and the Vietnam War. Type V ships were used to move ships and barges. Type V tugboats were made of either steel or wood hulls. There were four types of tugboats ordered for World War II. The largest type V design was the sea worthy 186-foot (57 m) long steel hull, V4-M-A1. The V4-M-A1 design was used by a number of manufacturers; a total of 49 were built. A smaller steel hull tugboat was the 94-foot (29 m) V2-ME-A1; 26 were built. The largest wooden hull was the 148-foot (45 m) V3-S-AH2, of which 14 were built. The smaller wooden hull was the 58-foot (18 m) V2-M-AL1, which 35 were built. Most V2-M-AL1 tugboats were sent to the United Kingdom for the war efforts under the lend-lease act. The Type V tugs served across the globe during World War II including: Pacific War, European theatre, and in the United States. SS Farallon, and other Type V tugs, were used to help built Normandy ports, including Mulberry harbour, on D-Day, 6 June 1944, and made nine round trips to Normandy to deliver Phoenix breakwaters.
Everett-Pacific Shipbuilding & Dry Dock Company was established in 1942 to build ships needed for World War II. Yard construction began on 1 March 1942. As part of the Emergency Shipbuilding Program, the US Navy provided some of the capital to start Everett-Pacific Shipbuilding at Port Gardner Bay in Everett, Washington. Everett-Pacific was sold in 1945 to the Pacific Car and Foundry, who was already a major manufacturer of railcars and trucks. Pacific Car and Foundry was building barges for the US Navy during World War II at plants in Renton, Seattle and Tacoma in the state of Washington. The lease for the shipyard in Everett, Washington ended in 1949 and the yard closed. Pacific Car and Foundry in 1972 changed its name to Paccar Inc. to reflect its major products. The Everett-Pacific shipyard site later became part of Western Gear, a heavy machinery manufacturer. in 1987 the shipyard became part of Naval Station Everett. Everett-Pacific Shipbuilding was started by William Pigott Jr. a Seattle businessmen and his brother Paul Pigott (1900-1961). William Pigott Jr. was born in 26 Aug. 1895 in Pueblo, CO and died on 8 July 1947 in San Francisco, CA.
Victory Shipbuilding was the name of two shipbuilding companies that built vessels during World War 2. The first was the Victory Shipbuilding Company, of Holland, Michigan, and the second was the Victory Shipbuilding Corporation, of Newport Beach, California.
W. F. Stone & Son or Stone Boat Yard was a small wooden shipbuilding company in Alameda, California. To support the World War 2 demand for ships W. F. Stone & Son built tugboats, sub chasers and minesweepers. For World War 1 the shipyard, then called W. F. Stone & Son at Kennedy and Bocimer Streets, built tugboats for postwar work in 1921. The shipyard was opened in 1853 by William F. Stone, from Dartmouth, England, at the Hunter's Point in San Francisco Bay, near the current Hunters Point Naval Shipyard. In 1892 William Stone's son, Frank, ran the company and moved the shipyard to Tiburon. In 1899 he moved the shipyard again to Harbor View, San Francisco. In 1911, he again moved to Diesel Way, in Oakland, near Union Point Park on the Tidal Canal. When Lester Stone, Frank's son, became a partner, the company was changed to W. F. Stone & Son. In 1923, Frank Stone died, Lester Stone continued the company. In 1942 the company moved again, to 2517 Blanding Ave, Alameda on the south side of the Tidal Canal. In 1970 Lester Stone retired and sold the shipyard to John Whitset. Whitset, who did not rename the company, the company went into bankruptcy in 1986. It came out of bankruptcy and was sold to Bill and Grace Bodle. Bodle sold the company in 2000 to David Olson. The shipyard closed in 2004. For most of its history, the shipyard built a large variety of schooners, fishing boats, cargo ships, tugboats, sailboats, racing and recreational yachts.
Ackerman Boat Company was a wooden shipbuilding company in Newport Beach, California. Ackerman Boat Company built small barges in Newport Harbor working with Star D Iron Works, in Santa Ana. To support the World War 2 demand for ships Ackerman Boat Company shipyard switched over to military construction and built: US Army Harbor Tugboats and US Navy Landing Craft Mechanized Model LCM Mark 3. Clarence Ackerman started the Ackerman Boat Company was in 1943. Ackerman Boat Company worked with Consolidated Steel's Wilmington shipyard to build the Tugboat and Landing Craft. Near the end of the war, Ackerman sold the yard to Consolidated Steel but purchased it back in 1947. Ackerman sold the shipyard in 1958. The shipyard was at 151 Shipyard Way, Newport Beach on the Lido Peninsula at the corner of Rhine Place. The current site has been the Newport Harbor Shipyard since 1981, which repairs and restoration of yachts.
Craig Shipbuilding was a shipbuilding company in Long Beach, California. To support the World War I demand for ships Craig Shipbuilding shipyard switched over to military construction and built: US Navy Submarines and Cargo Ships. Craig Shipbuilding was started in 1906 by John F. Craig. John F. Craig had worked in Toledo, Ohio with his father, John Craig (1838-1934), and Blythe Craig, both shipbuilders, their first ship was built in 1864 at Craig Shipbuilding Toledo. John F. Craig opened his shipbuilding company in Port of Long Beach on the south side of Channel 3, the current location of Pier 41 in the inner harbor, becoming the port's first shipyard. In 1908 Craig Shipbuilding was given the contract to finishing dredging of the Port of Long Beach inner harbor and to dredge the channel connecting it to the Pacific ocean. In 1917 Craig sold the shipyard to the short-lived California Shipbuilding Company. but then opened a new shipyard next to the one he just sold and called it the Long Beach Shipbuilding Company. The Long Beach Shipbuilding Company built cargo ships in 1918, 1919, and 1920 for the United States Shipping Board.
The Pacific Coast Engineering Company or PACECO is an American industrial fabricator and mechanical engineering company, and was previously a shipbuilding company in Oakland, California and then Alameda, California. To support the World War II demand for ships, PACECO shipyard switched over to military construction and built US Navy Tugboats.
Eureka Shipbuilding was a wooden shipbuilding company in Eureka, California. The shipyard was just south of town in Fields Landing on the South Bay of Humboldt Bay. To support the World War 2 demand for ships Eureka Shipbuilding shipyard switched over to military construction and built: United States Marine Corps tugboatss. Eureka Shipbuilding was started in 1941. On January 25, 1943 Eureka Ship Builders, Inc. was awarded a contract to build six V2-M-AL1 tugboats at a cost of $35,970 each, contact number DA-MCc-824. V2-M-AL1 tus is a class of Type V ship. The V2-M-AL1 is also called a Port Sewall class tug. V2-V2-M-AL1 tugs were named for American ports. All of Eureka Shipbuilding tug were used for Lend-Lease use to Britain as type TUSA tugs. After the war in 1947 the company was renamed `
Splinter fleet or Splinter navy was a nickname given to the United States wooden boats used in World War II. The boats served in many different roles during the war. These boats were built in small boatyards on the West coast and East coast, Great Lakes and the Gulf of Mexico. They could be built quickly, in just 60 to 120 days. Most of the boats were built by boatyards that already had the tools and knowledge from building yachts, sailboats and motor boats. Many were built by craftsmen in family-owned small businesses. Under the Emergency Shipbuilding Program and War Shipping Administration contracts went out to over fifty boatyards across the country. The boats were built for the US Navy, the United States Army Air Forces, United States Coast Guard, and US Army. Some of the wooden boats went to Allied nations on the Lend-Lease program.
New York Yacht, Launch & Engine Company was a shipyard located on the Harlem River in the Morris Heights neighborhood of the Bronx.
Bethlehem Key Highway Shipyard started as William Skinner & Sons in downtown Baltimore, Maryland in 1815. In 1899 the shipyard was renamed Skinner Shipbuilding & Dry Dock Company. Also at the site was Malster & Reanie started in 1870 by William T. Malster (1843–1907). In 1879 Malster partnered with William B. Reaney (1808-1883). In 1880 Malster & Reanie was sold and renamed Columbian Iron Works & Dry Dock Company. Malster & Reanie and Skinner Shipbuilding & Dry Dock Company merged in 1906, but remained as Skinner Shipbuilding. In 1914 the company was renamed Baltimore Dry Dock & Shipbuilding Company. Baltimore Dry Dock & Shipbuilding Company sold to Bethlehem Steel in 1922, becoming part of Bethlehem Shipbuilding Corporation. Bethlehem Steel operated the shipyard for ship repair, conversion and some ship construction. Bethlehem's main ship construction site was across the harbor at Bethlehem Sparrows Point. Bethlehem Key Highway Shipyard was known as the Bethlehem Upper Yard located north-east side of Federal Hill. Bethlehem Fort McHenry Shipyard located on the west side of Locust Point peninsula was known as the Lower Yard, near Fort McHenry.
The YT-86-class harbor tugboat was a wood-hulled tugboat design ordered by the U.S. Navy during World War I. 15 ships of the type were launched and completed, 12 as harbor tugs and three as ambulance boats. All were launched at the Mare Island Naval Shipyard in Vallejo, California except for one at the Pearl Harbor Naval Shipyard in Hawaii. In 1920, after the Navy's adoption of alpha-numeric hull designations, the ships were classified as yard tugs YT-86 though YT-90 and YT-92 through YT-99 and ambulance boats YH-1, YH-2, and YH-3.
