Yamaha SuperJet

Last updated
Yamaha SuperJet
1997 Yamaha SuperJet side view.jpg
A 1996 Yamaha SuperJet, the first year of the 701cc straight twin two-stroke engine with twin Mikuni carburetors
Manufacturer Yamaha Motor Corporation
Also calledSuperJet, 701, Square nose (SN), Round nose (RN)
Production1990 - present (2020)
Assembly
  • Engine: Kumamoto, Japan
  • Final assembly: Japan
Class Personal watercraft
Engine
  • Two stroke:
  • 650cc I2 single carb - 50hp (SJ650D)
  • 701cc I2 single carb - 63hp (SJ700S)
  • 701cc I2 dual carb - 73hp (SJ700AU)
  • Four stroke:
  • 1049cc I3 fuel injected - 100hp (SJ1050W)
Bore / stroke 81 mm × 68 mm (3.19 in × 2.68 in) (SJ700AU), 82.0 mm × 66.0 mm (3.23 in × 2.60 in) (SJ1050W)
Power 73 hp (54 kW) @6,300 rpm (SJ700AU), 100 hp (75 kW) @7,300 rpm (SJ1050W)
DimensionsL: 88.2 in (2,240 mm) (SJ700AU)
W: 26.8 in (681 mm)
H: 26.0 in (660 mm)
Weight291 lb (132 kg) (SJ700AU), 375 lb (170 kg) (SJ1050W) (dry)
Fuel capacity4.8 U.S. gallons (18 L), including 1.45 U.S. gallons (5.5 L) reserve. (SJ700AU),5.0 U.S. gallons (19 L), including 1.45 U.S. gallons (5.5 L) reserve. (SJ1050W)
Oil capacity
  • N/A, 50:1 fuel to oil pre-mix ratio
  • TC-W3 oil
, 3.10 U.S. gallons (11.7 L) (SJ1050W)
Fuel consumption7.7 US gal/h (29 L/h) max (SJ700AU), 8.0 US gal/h (30 L/h) max (SJ1050W)

The SuperJet is a stand-up type personal watercraft (PWC) made by Yamaha Motor Corporation. Part of Yamaha's WaveRunner line of watercraft, it was introduced in 1990 and has become one of the most successful stand-up personal watercraft ever made. [1] All SuperJets, including the engine, are hand-built in Japan. Credit for the design is given to Clayton Jacobson II.

Contents

Prior to the introduction of the new Kawasaki SX-R 1500 four stroke on October 6, 2016, it has been the only stand-up sold by a major manufacturer since the Kawasaki SX-R 800 was discontinued in 2011. The SX-R 800 was discontinued primarily due to the fact Kawasaki did not want to go through the hassle of trying to get around EPA regulations by marketing it as "closed course competition use only", instead opting to move on.

There are four engine generations spanning 1990-1993, 1994-1995, 1996-2020, and 2021-present, and four hull generations spanning 1990-1995, 1996-2007, 2008-2020, and 2021-present. 2019 marks the 30th year of production for the SuperJet.

The current model SuperJet is powered by a 1049cc inline three-cylinder, four-stroke engine.

All generations have an upper and lower hull constructed from SMC (sheet molded compound). SMC is a compression moldable composite material made of long strands of glass fibers suspended in a polyester resin.

The Yamaha FX-1 is the only other stand-up personal watercraft produced by Yamaha, and was produced in limited numbers from 1994-1995.

On August 12, 2020 Yamaha released the new 2021 SuperJet. This is the first complete redesign from the ground up since the introduction in 1990, and marks 30 years of SuperJet history. The hull is entirely new and it is now powered by Yamaha's 1,049cc three-cylinder four-stroke TR-1 marine engine.

Model Designations

Yamaha numbers its models according to their make (in the case of the SuperJet, all models begin with the letters SJ) followed by the engine size (given in approximate cubic centimeters— the 650cc referred to as 650 and the 701cc referred to as 700) and the year in which the vehicle was made, given as either a one or two letter designation and increasing by one ‘letter' each full year, with an optional letter placed before the year letter as an amendment code.

For example, the letter year designation for the year 1994 for the SuperJet was the letter S, so a SuperJet manufactured in 1994 would have the designation SJ700S. However, Yamaha made engine and chassis changes to the SJ700 for 1996, so appropriately an amendment code was added and a 1996 model has the designation SJ700AU, and in 2002 they increased the amendment by one to ‘roll over’ the letter years so the designation is SJ700BA. The model year 2018 has the designation SJ700BT. There was not a specific amendment code associated with the 2008 hull refresh.

SuperJet 1990-1993 (SJ650D,P,Q,R)[Generation 1]

A 1990 Yamaha Superjet, the first year of the popular Yamaha Standup PWC. 1990 Yamaha Superjet.jpg
A 1990 Yamaha Superjet, the first year of the popular Yamaha Standup PWC.

The 1990 SuperJet was the first year of Yamaha's stand-up PWC offering.

Motor

Chassis

SuperJet 1994-1995 (SJ700S-T)[Generation 1-Upgraded Engine)

Rear view of a 1995 SuperJet, showing the foot tray, fuel valve, choke, and handlebar controls. 1995 Yamaha SuperJet Rear View.jpg
Rear view of a 1995 SuperJet, showing the foot tray, fuel valve, choke, and handlebar controls.

The 1995 SuperJet received an all-new 701cc two-cylinder engine. The body remains the same as the previous generation with a "Square nose" top deck and standard SuperJet bottom deck.

Motor

Chassis

A 1995 SuperJet engine bay showing the 701cc single carb engine. Note the battery is actually installed backwards, largely indicated by the routing of the battery cables that does not look natural. 1995 Yamaha SuperJet Engine Bay.jpg
A 1995 SuperJet engine bay showing the 701cc single carb engine. Note the battery is actually installed backwards, largely indicated by the routing of the battery cables that does not look natural.

SuperJet 1996-2007 (SJ700AU-BF)[Generation 2]

2000 SuperJet in Yamaha Factory Blue/White color scheme Roundnose.jpg
2000 SuperJet in Yamaha Factory Blue/White color scheme

The body consists of a new "Round nose" top deck (or hull) and the same standard SuperJet bottom deck as the previous "Square nose" model.

Motor

Chassis

SuperJet 2008-2020 (SJ700BG-BV)[Generation 2-Upgraded Hull]

2008 SuperJet showing the Blue with White Graphics color scheme. 2008 Yamaha SuperJet.jpg
2008 SuperJet showing the Blue with White Graphics color scheme.

The last two-stroke powered SuperJet (produced by Yamaha Motor and hand-built in Japan) has been visually the same since 1996. The 2008 model was the first year of a new bottom deck, changed for the first time in the history of the SuperJet.

This watercraft no longer meets California or New York two-stroke emissions standards as a new vessel (however, previously titled vessels can still be registered in CA).[ citation needed ]

Purchasing a SuperJet new from a dealer starting in 2011 will usually require a license from IJSBA as they are classified as a "competition use only" watercraft, partly due to stringent EPA regulations for two-stroke engines. An annual membership from IJSBA is $65 for the first year as of May 2018, with renewal at $60 per year, if desired. These memberships can be purchased from the dealer in most cases. 2011 model year Superjet's also began to come with "Closed course competition use only" stickers on both the hood and exhaust.

Body Updates

The new 2008 has the same Roundnose top deck that was introduced in 1996, with a new bottom deck (or hull) incorporating the first changes since 1990 when the SuperJet was released.

The new bottom hull has incorporated side sponsons (similar to adding "Blowsion tubbies") onto the hull. The rear of the hull is also slightly narrower and has deeper strakes for improved tracking.

The handle pole on the 2008 SuperJet is 50 mm shorter than previous generation Roundnose SuperJets, which moves the rider forward slightly in the tray.

Mechanical Updates

The intake grate, pump, and ride plate are all set back 50 mm rearward compared to the past year SuperJets.

The engine remains as the same reliable two-cylinder twin carb as the previous 1996+ years, with no noted mechanical changes.

The impeller was updated to a newly designed geometry and made from stainless steel for the first time, in comparison to the previous aluminum design that remained the same throughout 1990-2007. The new impeller design offers large improvements in hookup as well as reduced pump cavitation. The prop driveshaft was changed to a constant diameter over the entire length to increase stiffness, versus previous years in which it is necked down to a smaller diameter in the center section. However, the impeller is backwards compatible with all older models and can be installed on any year SuperJet to replace the original aluminum impeller design.

Model Year Cosmetic Updates

A pair of new 2016 SuperJets in the Pure White with Black color scheme in Arizona. 2016 Yamaha SuperJets on trailer.jpg
A pair of new 2016 SuperJets in the Pure White with Black color scheme in Arizona.
Engine bay housing the 73 hp Yamaha 701cc inline 2-Cylinder, 2-Stroke twin-carb engine in a 2016 SuperJet. 2016 Superjet Engine Bay.jpg
Engine bay housing the 73 hp Yamaha 701cc inline 2-Cylinder, 2-Stroke twin-carb engine in a 2016 SuperJet.

Motor

The SuperJet has an integrated lock (right of photo) to hold the handle pole upright, unlike some other skis that have a removable pin that can be misplaced. 2016 Superjet Handle Pole Hinge.jpg
The SuperJet has an integrated lock (right of photo) to hold the handle pole upright, unlike some other skis that have a removable pin that can be misplaced.

Chassis

MSRP

SuperJet 2021-Present (SJ1050W) [Generation 3]

The 2021 SuperJet has been completely redesigned from the ground up. Yamaha says "This year marks the return of the Yamaha SuperJet, all-new from the ground up to challenge a new generation of stand-up riders with a torquey four-stroke Yamaha marine engine and nimble performance hull that is 142 pounds lighter and 8.8 inches shorter than its competition."

The largest change is moving from a two-stroke twin-cylinder engine to Yamaha dropping in their three-cylinder four-stroke 1049cc TR-1 marine engine. The hull has also been completely redesigned from the ground up with a new 144mm pump, adjustable steering nozzle, and reboarding grab handle in the tray.

The TR-1 marine engine weighs 160 lbs and is 30"L by 21"W by 19"H inches in size, producing 100 hp. It has an integrated oil tank, ECU and air filter onto the engine.

The launch price is $9,499 USD and the ski is still Made in Japan (as all past Super Jets have been).

Motor

Engine bay housing the 100 hp Yamaha TR-1 1049cc inline 3-Cylinder, 4-Stroke fuel injected engine in a 2021 SuperJet. 2021 Yamaha Superjet Engine Bay.jpg
Engine bay housing the 100 hp Yamaha TR-1 1049cc inline 3-Cylinder, 4-Stroke fuel injected engine in a 2021 SuperJet.

Chassis

MSRP History By Year

See also

Related Research Articles

<span class="mw-page-title-main">Jet Ski</span> Brand of personal water craft

Jet Ski is the brand name of a personal watercraft (PWC) manufactured by Kawasaki, a Japanese company. The term is often used generically to refer to any type of personal watercraft used mainly for recreation, and it is also used as a verb to describe the use of any type of PWC.

<span class="mw-page-title-main">Mitsubishi Astron engine</span> Reciprocating internal combustion engine

The Mitsubishi Astron or 4G5/4D5 engine, is a series of straight-four internal combustion engines first built by Mitsubishi Motors in 1972. Engine displacement ranged from 1.8 to 2.6 litres, making it one of the largest four-cylinder engines of its time.

<span class="mw-page-title-main">Mitsubishi 3G8 engine</span> Reciprocating internal combustion engine

The Mitsubishi 3G8 engine is a range of three-cylinder powerplant from Mitsubishi Motors, introduced in the fifth generation of their Mitsubishi Minica kei car. In common with other contemporary engines in the class, it could be specified with many advanced technologies despite its diminutive size, including multi-valve cylinder heads and double overhead camshafts. The top-of-the-line Dangan ZZ variant was also the first kei car to benefit from turbocharging. In 1987 Mitsubishi was the first manufacturer to supercharge a kei vehicle, and in 1989 became the world's first production car to feature five valves per cylinder, ahead of similar developments by Bugatti, Audi, Ferrari and Toyota.

<span class="mw-page-title-main">Yamaha DT200</span>

The Yamaha DT200 is a dual-purpose motorcycle manufactured during the 1980s, 1990s, and continues into the 2000s (decade) by the Yamaha Motor Company. Though never imported into the US, the rest of the world, including Canada, received some of these models. The DT200LC began production in 1983bc. It also was very similar to the DT125LC. This model continued production until 1988.Then, in 1989 a totally new model was introduced, DT200R (3ET), as well as a similar DT125R. In Canada, the DT125LC/R was never imported.

The WaveBlaster is a personal water craft (PWC) made by Yamaha Motor Corporation. Part of their WaveRunner line of watercraft, the Yamaha WaveBlaster 700 made its debut in 1993. Although technically a runabout style PWC the blaster is more closely related to the SuperJet.

The Yamaha FX-1 is a stand-up type personal watercraft (PWC) made by Yamaha Motor Corporation. Part of Yamaha's WaveRunner line of watercraft, it was introduced in 1994 and discontinued in 1995. It was built in very limited numbers and only around 1500 total were made.

<span class="mw-page-title-main">Suzuki RF series</span> Sport touring motorcycles

The Suzuki RF series are sport touring motorcycles. They came with three engine variations: 400 cc (24 cu in), 600 cc (37 cu in) and 900 cc (55 cu in). It was in production from 1994 to 1999.

<span class="mw-page-title-main">Hirth F-33</span> German two-stroke aircraft engine

The Hirth F-33 is a single cylinder, two stroke, carburetted aircraft engine designed for use on ultralight aircraft, including powered paragliders and ultralight trikes. the engine is noted for its extremely light base weight of 35 lb (16 kg). It is manufactured by Hirth of Germany.

The Hirth F-23 is a twin cylinder, horizontally-opposed, two stroke, carburetted or optionally fuel injected aircraft engine designed for use on ultralight aircraft. It is manufactured by Hirth of Germany.

<span class="mw-page-title-main">Hirth 2702</span> German two-stroke aircraft engine

The Hirth 2702 and 2703 are a family of in-line twin cylinder, two stroke, carburetted aircraft engines designed for use on ultralight aircraft and especially two seat ultralight trainers, single seat gyrocopters, and small homebuilts. It is manufactured by Hirth of Germany.

The Hirth 2704 and 2706 are a family of in-line twin cylinder, two stroke, carburetted aircraft engines, with optional fuel injection, designed for use on ultralight aircraft and especially two seat ultralight trainers, single seat gyrocopters and small homebuilts. It was manufactured by Hirth of Germany.

The Hirth F-30 is a horizontally opposed four-cylinder, two-stroke, carburetted aircraft engine, with optional fuel injection, designed for use on ultralight aircraft and homebuilts. It is manufactured by Hirth of Germany.

The Hirth 3701 is an in-line three-cylinder, two-stroke, carburetted aircraft engine, with optional fuel injection, designed for use on ultralight aircraft and small homebuilts. It is manufactured by Hirth of Germany.

The Hirth F-36 is a single-cylinder, two-stroke, carburetted aircraft engine designed for use on ultralight aircraft, especially powered paragliders and ultralight trikes. It is noted for its extremely small equipped weight of 28 lb (13 kg) including exhaust system, reduction drive and carburetor. It is manufactured by Hirth of Germany.

The Hirth 3202 and 3203 are a family of in-line twin cylinder, two stroke, carburetted aircraft engines, with optional fuel injection, designed for use on ultralight aircraft, especially two seat ultralight trainers, gyrocopters and small homebuilts. It is manufactured by Hirth of Germany.

The Hirth 3502 and 3503 are a family of liquid-cooled, in-line twin-cylinder, two-stroke, carbureted aircraft engines, with optional fuel injection, designed for use on ultralight aircraft and small homebuilts. It is manufactured by Hirth of Germany.

The Zenoah G-25 is a single cylinder, two stroke, carburetted aircraft engine, with optional fuel injection, designed for use on ultralight aircraft

The Zenoah G-50 is a twin-cylinder, horizontally opposed, two stroke, carburetted aircraft engine, designed for use on ultralight aircraft.

The Rotax 535 is an Austrian aircraft engine, that was designed and produced by Rotax of Gunskirchen for use in motor gliders.

<span class="mw-page-title-main">Suzuki A100</span> Japanese motorcycle made beginning 1966

The Suzuki A100 is a Japanese motorcycle from the Suzuki Motor Corporation with production starting in 1966.Similar models were produced by Yamaha and Kawasaki with the YB100 & KH100 models, also with a single-cylinder two-stroke engine and rotary valve being examples.

References

  1. ↑ "If It Ain't Broke: 2016 Yamaha SuperJet WaveRunner". Watercraft Journal. 7 June 2016. Archived from the original on 11 July 2018.
  2. ↑ "GALLERY: INTRODUCING THE 2020 YAMAHA WAVERUNNER LINEUP". Watercraft Journal. 15 August 2019. Retrieved 16 August 2019.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.