Caproni Ca.16 | |
---|---|
The Caproni Ca.16 of Slavorossov at Taliedo, near Milan, as he is about to leave for his Milan-Rome flight, 26 February 1913 | |
Role | Record-breaking aircraft |
Manufacturer | Caproni |
First flight | 1912 |
Status | Retired |
Number built | 1 |
The Caproni Ca.16 was a single-engine monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.16 was a single-engine, two seat monoplane with a modern configuration, with elica traente. It was derived from the Ca.15, in turn based on the structure – initially derived from that of Blériot XI – that Gianni Caproni had introduced for the first time aboard his airplanes to starting with Ca.8, after the experiments carried out with the series of biplanes from the Ca.1 to the Ca.6Aeroplani Caproni – Gianni Caproni ideatore e costruttore di ali italiane [1]
The Ca.16 was realized in 1912. [2] It presented the two separated and spaced places, as on the Ca.14 (while on Ca.15 they were very close and accessible through a single opening at the top of fuselage). On Ca.16 it was possible for the first pilot to arm or disengage the commands of the second pilot (or passenger). [2]
The operational history of Caproni Ca.16 is largely linked to the figure of the pilot Russian Chariton Nikanorovič Slavorossov. He had presented himself to Vizzola Ticino, where at that time the workshops of Caproni and Faccanoni were located, in January 1913, to buy a propeller for his Blériot. Caproni already knew the skills of this pilot, who had seen flying to Vienna in 1912. He offered him a pilot test place, which Slavorossov accepted. [3] On 24 January, on board a Ca.16, he beat the world record on a closed circuit of 5 km with passenger, covering 200 km in 1 h 56 '30'' and 250 km in 2 h 24' 30''. [2]
On 23 February 1913, with the intention (colored in tones patriotic, or even nationalistic) to give an impulse to the Italian aeronautic industry, the vice president of the Italian aviation company Luigi Origoni and the general secretary of the Italian Touring Club and collaborator of the La Gazzetta dello Sport Arturo Mercanti decided to give away a prize for the first flight from Milan to Rome made with an Italian aircraft.
Data from Gli aeroplani Caproni – Studi – Progetti – Realizzazioni 1908–1935 [2]
General characteristics
Performance
The Caproni Ca.60 Transaereo, often referred to as the Noviplano (nine-wing) or Capronissimo, was the prototype of a large nine-wing flying boat intended to become a 100-passenger transatlantic airliner. It featured eight engines and three sets of triple wings.
The Caproni Ca.1 was an experimental biplane built in Italy in 1910. It was the first aircraft to be designed and built by aviation pioneer Gianni Caproni, although he had previously collaborated with Henri Coandă on sailplane designs.
The Caproni Ca.125 was a single-engine, tandem two-seat, touring biplane built in Italy in 1933. It could be operated either as a landplane or seaplane.
The Gianni Caproni Museum of Aeronautics is Italy's oldest aviation museum, as well as the country's oldest corporate museum. It was established in 1927 as the Caproni Museum by Italian aviation pioneer and aeronautical engineer, Giovanni Battista "Gianni" Caproni and his wife, Timina Guasti Caproni.
The Caproni Ca.10 was a single-engine monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.9 was a single-engine monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.6 was a single-engine biplane designed and built by Caproni in the early 1910s.
The Caproni Ca.7 was a proposed biplane designed by Caproni in the early 1910s.
The Caproni Ca.8 was a single-seat monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.22 was a single-engine monoplane made by the Italian company Aeronautica Caproni in 1913.
The Caproni Ca.25 was a single-engine monoplane made by the Italian company Aeronautica Caproni in 1914.
The Caproni Ca.11 was a single-engine monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.12 was a two-seater single-engine monoplane built by Caproni in the early 1910s.
The Caproni Ca.13 was a two-seater single-engine monoplane built by Caproni in the early 1910s.
The Caproni Ca.105 was a multirole high wing single engine monoplane developed by the Italian aeronautical company Aeronautica Caproni in the late 1920s.
The Caproni Ca.120 was a three-engine monoplane bomber built by Caproni in the 1930s.
The Caproni Ca.127 was a single-engine reconnaissance monoplane built by Caproni in the mid-1930s.
The Caproni Ca.142 was a three-engined multirole aircraft built by Caproni in the mid-1930s.
The Caproni Ca.53 was an Italian prototype light bomber built in the last months of World War I.
The Caproni Ca.14 was an early biplane developed by Giovanni Battista Caproni in the early 1910s.