| Ca.53 | |
|---|---|
 | |
| Role | Light bomber/reconnaissance aircraft |
| Manufacturer | Caproni |
| First flight | 1918 |
| Status | prototype only |
| Primary user | Italian Army |
| Number built | 1 |
The Caproni Ca.53 was an Italian prototype light bomber built in the last months of World War I.
The Ca.53 was a single-engine, two-seat triplane with triple glazing and fixed undercarriage. The fuselage, of rectangular section, was made of a wooden structure covered with plywood panels and characterized by the presence of two open tandem cabins, the front reserved for the pilot and the rear for the tail gunner, the latter also equipped with a lower ventral position. Integrated into the structure were the compartment and the device to launch bombs. Posteriormente it ended in a classic mono-fletching drift characterized by a single horizontal plane braced by a pair of "V" rods on each side. The upper wing was mounted high parasol, the middle wing was mounted high on the fuselage, and the lower wing was mounted low on the fuselage; all the wings were equipped with ailerons and connected to each other by three uprights on the side integrated with steel cables.
The landing gear was fixed, mounted on a tubular structure underneath the fuselage, equipped with large diameter wheels and a mechanical device that had been lapped and integrated laterally by a support shoe positioned under the tail. [1]
In 1917, the Royal Military Aviation Technical Directorate issued a specification for the supply of a new bombing aircraft capable of carrying a 400 kg war load in bombs at a speed of 200 km/h. Giovanni Battista Caproni responded with a triplane design with a classic, single engine propeller design with wooden structure covered in plywood and treated canvas, characterized by the triple gliding suitable for light bombardment, fast aerial reconnaissance and hunting.
The Ca.53 was completed in 1918 and first flew that same year at the Taliedo airfield. The model, which in its first phase of development was equipped with different engines, aroused the interest of the US and British armed forces. The installation of a more powerful 700 bhp Fiat A.14 engine (515 kW) was also envisaged, with which it was expected to reach a top speed of 240 km/h. However, probably due to the need to give priority the construction of the large bombers and disappointing performance, the Ca.53 did not enter production.
After WW1, Caproni proposed two civilian derivatives of the Ca.53, the four-passenger Ca.54 airliner and the Ca.55 floatplane. However, those projects remained on the drawing board due to the serious downturn in the aviation market after WW1. [2]
Data from , [3] Aerei Italiani 1914-18, [2] Aeroplani Caproni dal 1908 al 1935 [1]
General characteristics
Performance
Armament
Related lists
The Caproni Ca.3 is an Italian heavy bomber of World War I and the postwar era. It was the most produced version of the series of aircraft that began with the 1914 Caproni Ca.1 and continued until the more powerful 1917 Caproni Ca.5 variant.
The Caproni Ca.4 was an Italian heavy bomber of the World War I era.
The Caproni Ca.1 was an Italian heavy bomber of the World War I era.
The Caproni Ca.2 was an Italian heavy bomber of the World War I era.
The Caproni Ca.133 was a three-engined transport/bomber aircraft used by the Italian Regia Aeronautica from the Second Italo-Abyssinian War until World War II.
The Caproni Ca.60 Transaereo, often referred to as the Noviplano (nine-wing) or Capronissimo, was the prototype of a large nine-wing flying boat intended to become a 100-passenger transatlantic airliner. It featured eight engines and three sets of triple wings.
The Caproni Ca.135 was an Italian medium bomber designed in Bergamo in Italy by Cesare Pallavicino. It flew for the first time in 1935, and entered service with the Peruvian Air Force in 1937, and with the Regia Aeronautica in January 1938.
The Caproni Ca.73 was an Italian airliner produced during the 1920s which went on to serve as a light bomber in the newly independent Regia Aeronautica.
The Caproni Ca.97 was a civil utility aircraft produced in Italy in the late 1920s and early 1930s. As originally designed, it was a high-wing braced trimotor monoplane of conventional configuration with one engine mounted on the nose and the other two carried on strut-mounted nacelles at the fuselage sides. Examples were also produced with only the nose engine or only the two nacelle-mounted engines.
The Caproni Ca.66 was an Italian night bomber designed to reequip the post-World War I Italian Air Force. Only two examples of the four-engined biplane were built.
The Caproni Ca.9 was a single-engine monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.22 was a single-engine monoplane made by the Italian company Aeronautica Caproni in 1913.
The Caproni Ca.11 was a single-engine monoplane designed and built by Caproni in the early 1910s.
The Caproni Ca.13 was a two-seater single-engine monoplane built by Caproni in the early 1910s.
The Caproni Ca.66 and Caproni Ca.67 were Italian night bomber aircraft designed to re-equip the post-World War I Regia Aeronautica.
The Caproni Ca.79 was an Italian light bomber produced in the mid-1920s.
The Caproni Ca.103 was a biplane twin-engine bomber developed by the Italian company Aeronautica Caproni in the late 1920s.
The Caproni Ca.105 was a multirole high wing single engine monoplane developed by the Italian aeronautical company Aeronautica Caproni in the late 1920s.
The Caproni Ca.120 was a three-engine monoplane bomber built by Caproni in the 1930s.
The Caproni Ca.142 was a three-engined multirole aircraft built by Caproni in the mid-1930s.
