Capsizing or keeling over occurs when a boat or ship is rolled on its side or further by wave action, instability or wind force beyond the angle of positive static stability or it is upside down in the water. The act of recovering a vessel from a capsize is called righting. Capsize may result from broaching, knockdown, loss of stability due to cargo shifting or flooding, or in high speed boats, from turning too fast.
If a capsized vessel has enough flotation to prevent sinking, it may recover on its own in changing conditions or through mechanical work if it is not stable while inverted. Vessels of this design are called self-righting.
Small vessels
Righting a capsized Laser sailing dinghy by standing on the daggerboard
In dinghy sailing, a practical distinction can be made between being knocked down (to 90 degrees; on its beam-ends, figuratively) which is called a capsize, and being inverted, which is called being turtled. Small dinghies frequently capsize in the normal course of use and can usually be recovered by the crew. Some types of dinghy are occasionally deliberately capsized, as capsizing and righting the vessel again can be the fastest means of draining water from the boat.[citation needed]
Capsizing (but not necessarily turtling) is an inherent part of dinghy sailing. It is not a question of "if" but a question of "when".[1] For those who do not want the experience, a keelboatmonohull has physics on its side.[1][2] But even yachts can capsize and turtle in extraordinary conditions, so design considerations are important.[2] Such events can overcome skill and experience; boats need to be appropriate for foreseeable conditions.[3]
A kayak roll, after intentional capsizing
A capsized kayak may be righted with a roll or eskimo rescue. As long as the kayaker knows how to react, the water is not too shallow, and the location is not close to dangers that require evasive action by the kayaker – which cannot be taken while capsized – capsizing itself is usually not considered dangerous. In whitewater kayaking, capsizing occurs frequently and is accepted as an ordinary part of the sport.[citation needed] Kayak rolling, in which paddlers intentionally capsize and right themselves (in synchrony, as many times as possible in a given interval, or in as many different ways as possible) is also a competitive sport, especially in Greenland.[citation needed]
Sailing vessels' "capsize ratio" is commonly published as a guideline for zones of safe operation — less than 2.0 means as a rule-of-thumb suitability for offshore navigation. However its crude nature of displacement divided by a vessel's beam (breadth) (albeit with a constant multiplied to provide an average assessment), means thorough assessment of ship stability, immersibility and buoyancy involves other factors to address the relevant risks posed by waves, tides, weather and occurrences such as damage and collision.[citation needed][clarification needed]
Large vessels
In a storm, even large vessels may be rolled by being hit broadside by a large wave or swell or "pitch poled" stem over stern in extreme waves. This is normally catastrophic for larger ships, and smaller yachts can be dismasted (i.e., lose their masts and rigging) due to the drag as the boat is forced to roll over.
A ship that sustains a hole or crack ('is holed') may capsize.[4] This is the working of torpedo and naval mine warfare. In 2012 the very large cruise shipCosta Concordia was holed and lost her propulsion by a mapped rock near the shallows, and drifted further where she partially sank, resting towards one side with most of her structure out of the water. This was not a capsize as her bottom was only partly exposed; rather this was a partial sinking. Fixing a hole is called plugging.
The Costa Concordia after sinking and running aground
Otherwise a vessel in largely upright position which capsizes has suffered too much water to enter in places normally above the waterline, and which may be caused by poor manoeuvering, overloading (see Plimsoll Line) or poor weather. As for holes, bailing may be carried out – removal of water aboard such as with a bilge pump, self or hand bailer or buckets. At the stage of sinking where its buoyancy is deemed critical, the ship is unlikely to upright nor able to right itself such that stability and safety will be compromised even if the vessel is righted — a decision is made to abandon ship and any ultimate salvage may entail firm grounding and re-buoyancy pumps. Among ship types, a roll-on-roll-off (RORO or ro-ro) ship is more prone to capsizing as it has large open car decks near the waterline. If the watertight car-deck doors fail through damage or mismanagement (as in the partial sinking of MSHerald of Free Enterprise where the doors were accidentally left open, and as in one of the largest peacetime maritime disasters when MSEstonia sank off of the Archipelago Sea in Finland), water entering the car-deck is subject to the free surface effect and may cause a capsize. As a RORO ferry rolls, vehicles can break free and slide down if not firmly secured, adversely altering the ship's centre of gravity, accelerating the roll, and possibly turning an otherwise recoverable roll into a capsize.
Competition
A team at the 2005 ISAF Team Racing World Championship narrowly avoids capsizing.
In competitive yacht racing, a capsized boat has certain special rights as it cannot maneuver. A boat is deemed capsized when the mast is touching the water; when it is fully inverted, it is said to have turned turtle or turtled.[5] Good racers can often recover from a capsize with minimal loss of time.
The capsize can result from extreme broaching, especially if the keel has insufficient leverage to tilt the vessel upright.
Righting a capsized Hobie CatPractice: righting a sailing dinghy after a deliberate capsize on Wroxham Broad
Intermediate sailors are encouraged to capsize their dinghies in a safe location with supervision at least once to become acquainted with their boat's floating properties and the capsize process. The boat is then righted, bailed out, and the sails reset, so that in the event of an uncontrolled capsize, the boat and its occupants are familiar with the procedure and may recover.
Most small monohull sailboats can normally be righted by standing or pulling down on the centreboard, daggerboard (or bilgeboard in a scow) to lift the mast clear of the water. Depending on the design of the hull, the boat's righting moment will normally take effect once the mast is around 30 degrees from horizontal and help pull the boat vertical. Righting a catamaran that is lying on its side involves using a righting line fed over the upper hull. The crew stands on the lower hull and pulls back on the righting line. In small catamarans such as the Hobie 16 it is imperative that at least one crew member assumes this task as soon as possible as there is a chance that the boat will turtle and then become extremely difficult to recover without assistance.[6] Some monohulls and catamarans use a small flotation device mounted at the tip of the mast or mainsail to ensure that the craft cannot assume an inverted position, or at least that a fully inverted position is not stable (i.e. it would come to a position where the mast is lying on the surface of the water, which would be preferable to fully inverted).
In both cases, having a crew member lift the end of the mast out of the water may help speed the process, as the greatest challenge of righting a capsized boat is shedding the weight of the water from the sails. A helpful step, where possible (on a loose footed sail), is to disconnect the clew of the sail from the boom, which prevents the sail from scooping up water as the sail lifts out of the water. The bow of the capsized vessel should be pointed towards the wind so that when the sail starts to lift out of the water the wind can catch underneath the sail and help right the boat.
Care is taken not to let the boat swing all the way over and capsize on the other side, frequently with the crew on the bottom. This is more likely if the boat is not pointed into the wind.
Prevention
There is a wide range of technology that can be installed or strategically placed to prevent or deter a boat or ship from capsizing. The various technologies rely on inflating airbags also known as lift bags which increasing the vessel's buoyancy with the water. There are many steps a crew can take to reduce the chance of capsizing, such as distributing the weight evenly and taking care during windy weather.[7]
Yachts
Capsizing in yachts can occur when water is able to infiltrate the hull and decrease the vessels water and buoyancy leading to capsizing. Yachts can be deployed with a flotation system which is a series of strategically placed lift bags within the interior of the hull increasing the vessel's buoyancy and filling void space where water can collect, providing valuable time to remove the water, fix damage or evacuate.[8]
Large ships
When larger ships such as cargo ships and tankers capsize or sink not only is recovery not possible but great environment damage can occur from spillage of cargo.[9] Larger ships are being equipped with Surfacing System for Ship Recovery which is an inflatable device that is installed in the ballast water tank or within the hull of the vessel and can be deployed within seconds of an accident to stabilize the vessel and give more time for rescue and evacuation.[10]
Self-righting
A crane capsizes a small coast guard vessel to test its righting ability
A larger self-righting vessel's stability test. Note large deckhouse, which is almost the only part submerged when fully inverted.
The Beeching-Peake SR (self-righting) lifeboat won an 1851 competition for improved lifeboat design. Drawings show large, high buoyancy tanks, and ballast.
The Lizzie Porter is a Peake-class lifeboat, an early design of self-righting boat. Note the high, rounded buoyancy tanks at her bow and stern, and low sides amidships.
A vessel may be designated as "self-righting" if it is designed to be able to capsize then return to upright without intervention (with or without crew on board). The angle of vanishing stability, the angle of heel at which a vessel becomes unstable and does not bob back upright, does not exist; a self-righting boat will return to upright from any position, including completely upside-down. A self-righting vessel must be positively buoyant when swamped. There are three methods of making a vessel self-right: careful distribution of stationary weight and buoyancy, inflatable airbags, and movable ballast.[11]
A basic tool for calculating a vessel's stability is a static stability diagram, which plots the angle of heel on the horizontal axis and the righting lever (GZ) on the vertical axis. (see metacentric height for details). If the static stability curve never crosses the x-axis, the boat is not stable upside-down. This is not sufficient to build a boat with good stability at sea, as it neglects the effects of wind, waves, and human occupants, but it is a simple, powerful way to analyze the stability of a vessel.[11] See also primary stability and secondary stability.
Self-righting through distribution of weight and buoyancy requires the weight low-down, and the buoyancy high up. It is often accomplished with a self-sealing superstructure, such as the large deckhouses on modern rescue boats.[11]
Most small craft intended as lifeboats with rigid (rather than inflatable) hulls designed since about the middle of the twentieth century are self-righting.[citation needed]
Small radio-controlled boats may also self-right. This is particularly useful for racing.[12]
Notable capsizings
German battleship Tirpitz lying capsized in Tromsø fjord after the Operation Catechism air raid, attended by a salvage vessel.
Mary Rose, 19 July 1545, capsized and sank, English carrack, 380 dead.
Vasa, 10 August 1628, Swedish warship, maiden voyage, 30–50 dead.
Codseeker, 9 May 1877, Canadian fishing schooner, maiden voyage, 4 dead, 2 trapped in hull rescued three days later.
HMSBarham, on the 25th of November, 1941, torpedoed four times by German U-boat U-331, rolled over to port within 4 minutes before exploding, 862 dead.
USSOklahoma, 7 December 1941, U.S. battleship torpedoed at Pearl Harbor, 429 missing or killed.
HMSRepulse, 10 December 1941, Attacked and sunk by Japanese aircraft, 517 dead.
HMSPrince of Wales, 10 December 1941, Attacked and sunk by enemy Japanese aircraft, 328 dead.
MVDemas Victory, 30 June 2009, which sails to offshore oil and gas platforms capsized off the coast of Qatari capital city of Doha.[14]
Costa Concordia, 13 January 2012, ran aground off the island of Giglio, western Italy, with about 4,200 aboard, all except 32 saved.
Sewol, 16 April 2014, approximately three kilometres off Gwanmae Island, South Jeolla Province, South Korea, with over 450 people on board, 304 dead, 172 survivors.
MV Phoenix, 5 July 2018, hit fellow tourist boat MV Serenita; both capsized and sank in a sudden storm near Phuket, Thailand. Double-decker: 41 dead and 15 missing, 49 survivors; smaller boat carried 42 passengers, all saved.
MV Nyerere, 20 September 2018, ferry shuttling people and cargo on Lake Victoria, Tanzania due to pilot distraction when docking, a sharp turn and overloading. 227 known dead, passenger log lost, tens survived.
MV Golden Ray, 8 September 2019, automobile carrier in St Simons Sound off the US state of Georgia, improperly ballasted and heeled over during sharp turn. All 23 crewmembers and the harbor pilot were rescued.
Turtling (sailing) – a full capsize in which the mast and sail are fully submerged.
Related Research Articles
A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture.
A dinghy is a type of small boat, often carried or towed by a larger vessel for use as a tender. Utility dinghies are usually rowboats or have an outboard motor. Some are rigged for sailing but they differ from sailing dinghies, which are designed first and foremost for sailing. A dinghy's main use is for transfers from larger boats, especially when the larger boat cannot dock at a suitably-sized port or marina.
A yawl is a type of boat. The term has several meanings. It can apply to the rig, to the hull type or to the use which the vessel is put.
Dinghy sailing is the activity of sailing small boats by using five essential controls:
The metacentric height (GM) is a measurement of the initial static stability of a floating body. It is calculated as the distance between the centre of gravity of a ship and its metacentre. A larger metacentric height implies greater initial stability against overturning. The metacentric height also influences the natural period of rolling of a hull, with very large metacentric heights being associated with shorter periods of roll which are uncomfortable for passengers. Hence, a sufficiently, but not excessively, high metacentric height is considered ideal for passenger ships.
Sailing ships frequently encounter difficult conditions, whether by storm or combat, and the crew frequently called upon to cope with accidents, ranging from the parting of a single line to the whole destruction of the rigging, and from running aground to fire.
A centreboard or centerboard (US) is a retractable hull appendage which pivots out of a slot in the hull of a sailboat, known as a centreboard trunk (UK) or centerboard case (US). The retractability allows the centreboard to be raised to operate in shallow waters, to move the centre of lateral resistance, to reduce drag when the full area of the centreboard is not needed, or when removing the boat from the water, as when trailering. A centreboard which consists of solely a pivoting metal plate is called a centerplate. A daggerboard is similar but slides vertically rather than pivoting.
The Wayfarer is a wooden or fibreglass hulled fractional Bermuda rigged sailing dinghy of great versatility; used for short 'day boat' trips, longer cruises and for racing. Over 11,000 have been produced as of 2016.
A monohull is a type of boat having only one hull, unlike multihulled boats which can have two or more individual hulls connected to one another.
In sailing, hiking is the action of moving the crew's body weight as far to windward (upwind) as possible, in order to decrease the extent the boat heels. By moving the crew's weight to windward, the moment of that force around the boat's center of buoyancy is increased. This opposes the heeling movement of the wind pushing sideways against the boat's sails. It is usually done by leaning over the edge of the boat as it heels. Some boats are fitted with equipment such as hiking straps and trapezes to make hiking more effective.
The beam of a ship is its width at its widest point. The maximum beam (BMAX) is the distance between planes passing through the outer sides of the ship, beam of the hull (BH) only includes permanently fixed parts of the hull, and beam at waterline (BWL) is the maximum width where the hull intersects the surface of the water.
The Wanderer is a 14-foot Fibreglass hull Bermuda rigged sailing dinghy designed by Ian Proctor. One of the main objectives of the design was to produce a robust safe and versatile dinghy that could be used for knockabout day sailing and cruising as well as racing, but was light enough to be handled ashore.
In dinghy sailing, a boat is said to be turtling or to turn turtle when the boat is fully inverted with the mast pointing down to the lake bottom, riverbed, or seabed. The name stems from the appearance of the upside-down boat, similar to the carapace of a sea turtle. The term can be applied to any vessel; turning turtle is less frequent but more dangerous on ships than on smaller boats. It is rarer but more hazardous for multihulls than for monohulls, because multihulls are harder to flip in both directions. Measures can be taken to prevent a capsize from becoming a turtle.
The P-Class is a type of small single sail dinghy, popular as a training boat for young people in New Zealand. This class is famous for being the sailing trainer vessel for many new entrants into the sport, and virtually every famous New Zealand yachtsman, including Sir Peter Blake and Russell Coutts, learnt to sail in one. The P-Class was for many years the most common sailing boat in New Zealand.
The Jacksnipe is a two-man racing sailing dinghy with a single trapeze for the crew and symmetrical spinnaker.
Ship stability is an area of naval architecture and ship design that deals with how a ship behaves at sea, both in still water and in waves, whether intact or damaged. Stability calculations focus on centers of gravity, centers of buoyancy, the metacenters of vessels, and on how these interact.
In sailing, the limit of positive stability (LPS) or angle of vanishing stability (AVS) is the angle from the vertical at which a boat will no longer stay upright but will capsize, becoming inverted, or turtled.
The RS Tera is a one-man monohull dinghy in the RS Sailing range of sailing boats. It is recognised by the International Sailing Federation (ISAF) as an international class, and is a popular boat for beginners and for children to race.
The following outline is provided as an overview of and topical guide to sailing:
This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
