Chronostratigraphy

Last updated

Chronostratigraphy is the branch of stratigraphy that studies the ages of rock strata in relation to time.

Contents

The ultimate aim of chronostratigraphy is to arrange the sequence of deposition and the time of deposition of all rocks within a geological region, and eventually, the entire geologic record of the Earth.

The standard stratigraphic nomenclature is a chronostratigraphic system based on palaeontological intervals of time defined by recognised fossil assemblages (biostratigraphy). The aim of chronostratigraphy is to give a meaningful age date to these fossil assemblage intervals and interfaces. [1]

Methodology

Chronostratigraphy relies heavily upon isotope geology and geochronology to derive hard dating of known and well defined rock units which contain the specific fossil assemblages defined by the stratigraphic system. In practice, as it is very difficult to isotopically date most fossils and sedimentary rocks directly, inferences must be made in order to arrive at an age date which reflects the beginning of the interval.

The methodology used is derived from the law of superposition and the principles of cross-cutting relationships.

Because igneous rocks occur at specific intervals in time and are essentially instantaneous on a geologic time scale, and because they contain mineral assemblages which may be dated more accurately and precisely by isotopic methods, the construction of a chronostratigraphic column relies heavily upon intrusive and extrusive igneous rocks.

Metamorphism, often associated with faulting, may also be used to bracket depositional intervals in a chronostratigraphic column. Metamorphic rocks can occasionally be dated, and this may give some limitations to the age in which a bed could have been laid down. For example, if a bed containing graptolites overlies crystalline basement at some point, dating the crystalline basement will give a maximum age of that fossil assemblage.

This process requires a considerable degree of effort and checking of field relationships and age dates. For instance, there may be many millions of years between a bed being laid down and an intrusive rock cutting it; the estimate of age must necessarily be between the oldest cross-cutting intrusive rock in the fossil assemblage and the youngest rock upon which the fossil assemblage rests.

Units

Chronostratigraphic units, with examples: [2]

Differences from geochronology

It is important not to confuse geochronologic and chronostratigraphic units. [3] [4] Chronostratigraphic units are geological material, so it is correct to say that fossils of the species Tyrannosaurus rex have been found in the Upper Cretaceous Series. [5] Geochronological units are periods of time and take the same name as standard stratigraphic units but replacing the terms upper/lower with late/early. Thus it is also correct to say that Tyrannosaurus rex lived during the Late Cretaceous Epoch. [6]

Chronostratigraphy is an important branch of stratigraphy because the age correlations derived are crucial in drawing accurate cross sections of the spatial organization of rocks and in preparing accurate paleogeographic reconstructions.

See also

Related Research Articles

In chronostratigraphy, a stage is a succession of rock strata laid down in a single age on the geologic timescale, which usually represents millions of years of deposition. A given stage of rock and the corresponding age of time will by convention have the same name, and the same boundaries.

Geology is a branch of natural science concerned with the Earth and other astronomical objects, the rocks of which they are composed, and the processes by which they change over time. Modern geology significantly overlaps all other Earth sciences, including hydrology. It is integrated with Earth system science and planetary science.

<span class="mw-page-title-main">Geologic time scale</span> System that relates geologic strata to time

The geologic time scale or geological time scale (GTS) is a representation of time based on the rock record of Earth. It is a system of chronological dating that uses chronostratigraphy and geochronology. It is used primarily by Earth scientists to describe the timing and relationships of events in geologic history. The time scale has been developed through the study of rock layers and the observation of their relationships and identifying features such as lithologies, paleomagnetic properties, and fossils. The definition of standardised international units of geologic time is the responsibility of the International Commission on Stratigraphy (ICS), a constituent body of the International Union of Geological Sciences (IUGS), whose primary objective is to precisely define global chronostratigraphic units of the International Chronostratigraphic Chart (ICC) that are used to define divisions of geologic time. The chronostratigraphic divisions are in turn used to define geochronologic units.

<span class="mw-page-title-main">Stratigraphy</span> Study of rock layers and their formation

Stratigraphy is a branch of geology concerned with the study of rock layers (strata) and layering (stratification). It is primarily used in the study of sedimentary and layered volcanic rocks. Stratigraphy has three related subfields: lithostratigraphy, biostratigraphy, and chronostratigraphy.

<span class="mw-page-title-main">Geochronology</span> Science of determining the age of rocks, sediments and fossils

Geochronology is the science of determining the age of rocks, fossils, and sediments using signatures inherent in the rocks themselves. Absolute geochronology can be accomplished through radioactive isotopes, whereas relative geochronology is provided by tools such as paleomagnetism and stable isotope ratios. By combining multiple geochronological indicators the precision of the recovered age can be improved.

<span class="mw-page-title-main">Biostratigraphy</span> Stratigraphy which assigns ages of rock strata by using fossils

Biostratigraphy is the branch of stratigraphy which focuses on correlating and assigning relative ages of rock strata by using the fossil assemblages contained within them. The primary objective of biostratigraphy is correlation, demonstrating that a particular horizon in one geological section represents the same period of time as another horizon at a different section. Fossils within these strata are useful because sediments of the same age can look completely different, due to local variations in the sedimentary environment. For example, one section might have been made up of clays and marls, while another has more chalky limestones. However, if the fossil species recorded are similar, the two sediments are likely to have been laid down around the same time. Ideally these fossils are used to help identify biozones, as they make up the basic biostratigraphy units, and define geological time periods based upon the fossil species found within each section.

<span class="mw-page-title-main">Geological formation</span> Fundamental unit of lithostratigraphy

A geological formation, or simply formation, is a body of rock having a consistent set of physical characteristics (lithology) that distinguishes it from adjacent bodies of rock, and which occupies a particular position in the layers of rock exposed in a geographical region. It is the fundamental unit of lithostratigraphy, the study of strata or rock layers.

A stratigraphic unit is a volume of rock of identifiable origin and relative age range that is defined by the distinctive and dominant, easily mapped and recognizable petrographic, lithologic or paleontologic features (facies) that characterize it.

<span class="mw-page-title-main">Lithostratigraphy</span> Sub-discipline of stratigraphy

Lithostratigraphy is a sub-discipline of stratigraphy, the geological science associated with the study of strata or rock layers. Major focuses include geochronology, comparative geology, and petrology.

<span class="mw-page-title-main">Wilcox Group</span> Geologic group in North America

The Wilcox Group is an important geologic group in the Gulf of Mexico Basin and surrounding onshore areas from Mexico and Texas to Louisiana and Alabama. The group ranges in age from Paleocene to Eocene and is in Texas subdivided into the Calvert Bluff, Simsboro and Hooper Formations, and in Alabama into the Nanafalia and Hatchetigbee Formations. Other subdivisions are the Lower, Middle and Upper Wilcox Subgroups, and the Carrizo and Indio Formations.

<span class="mw-page-title-main">Relative dating</span>

Relative dating is the science of determining the relative order of past events, without necessarily determining their absolute age. In geology, rock or superficial deposits, fossils and lithologies can be used to correlate one stratigraphic column with another. Prior to the discovery of radiometric dating in the early 20th century, which provided a means of absolute dating, archaeologists and geologists used relative dating to determine ages of materials. Though relative dating can only determine the sequential order in which a series of events occurred, not when they occurred, it remains a useful technique. Relative dating by biostratigraphy is the preferred method in paleontology and is, in some respects, more accurate. The Law of Superposition, which states that older layers will be deeper in a site than more recent layers, was the summary outcome of 'relative dating' as observed in geology from the 17th century to the early 20th century.

Chemostratigraphy, or chemical stratigraphy, is the study of the chemical variations within sedimentary sequences to determine stratigraphic relationships. The field is relatively young, having only come into common usage in the early 1980s, but the basic idea of chemostratigraphy is nearly as old as stratigraphy itself: distinct chemical signatures can be as useful as distinct fossil assemblages or distinct lithographies in establishing stratigraphic relationships between different rock layers.

<span class="mw-page-title-main">Chinle Formation</span> Geological formation in the western US

The Chinle Formation is an Upper Triassic continental geological formation of fluvial, lacustrine, and palustrine to eolian deposits spread across the U.S. states of Nevada, Utah, northern Arizona, western New Mexico, and western Colorado. In New Mexico, it is often raised to the status of a geological group, the Chinle Group. Some authors have controversially considered the Chinle to be synonymous to the Dockum Group of eastern Colorado and New Mexico, western Texas, the Oklahoma panhandle, and southwestern Kansas. The Chinle Formation is part of the Colorado Plateau, Basin and Range, and the southern section of the Interior Plains. A probable separate depositional basin within the Chinle is found in northwestern Colorado and northeastern Utah. The southern portion of the Chinle reaches a maximum thickness of a little over 520 meters (1,710 ft). Typically, the Chinle rests unconformably on the Moenkopi Formation.

<span class="mw-page-title-main">Biozone</span>

In biostratigraphy, biostratigraphic units or biozones are intervals of geological strata that are defined on the basis of their characteristic fossil taxa, as opposed to a lithostratigraphic unit which is defined by the lithological properties of the surrounding rock.

<span class="mw-page-title-main">Stratigraphic section</span> Sequence of layers of rocks in the order they were deposited

A stratigraphic section is a sequence of layers of rocks in the order they were deposited. It is based on the principle of original horizontality, which states that layers of sediment are originally deposited horizontally under the action of gravity.

In paleontology, biochronology is the correlation in time of biological events using fossils. In its strict sense, it refers to the use of assemblages of fossils that are not tied to stratigraphic sections. Collections of land mammal ages have been defined for every continent except Antarctica, and most are correlated with each other indirectly through known evolutionary lineages. A combination of argon–argon dating and magnetic stratigraphy allows a direct temporal comparison of terrestrial events with climate variations and mass extinctions.

Magnetostratigraphy is a geophysical correlation technique used to date sedimentary and volcanic sequences. The method works by collecting oriented samples at measured intervals throughout the section. The samples are analyzed to determine their characteristic remanent magnetization (ChRM), that is, the polarity of Earth's magnetic field at the time a stratum was deposited. This is possible because volcanic flows acquire a thermoremanent magnetization and sediments acquire a depositional remanent magnetization, both of which reflect the direction of the Earth's field at the time of formation. This technique is typically used to date sequences that generally lack fossils or interbedded igneous rock. It is particularly useful in high-resolution correlation of deep marine stratigraphy where it allowed the validation of the Vine–Matthews–Morley hypothesis related to the theory of plate tectonics.

The Milk River Formation is a sandstone-dominated stratigraphic unit of the Western Canada Sedimentary Basin in southern Alberta, Canada. It was deposited in near-shore to coastal environments during Late Cretaceous time. Based on uranium-lead dating, palynology and stratigraphic relationships, deposition occurred between ~84.1 and 83.6 Ma.

<span class="mw-page-title-main">Stratigraphic column</span>

A stratigraphic column is a representation used in geology and its subfield of stratigraphy to describe the vertical location of rock units in a particular area. A typical stratigraphic column shows a sequence of sedimentary rocks, with the oldest rocks on the bottom and the youngest on top.

A geological contact is a boundary which separates one rock body from another. A contact can be formed during deposition, by the intrusion of magma, or through faulting or other deformation of rock beds that brings distinct rock bodies into contact.

References

  1. Subcommission on Quaternary Stratigraphy (2002). "Chronostratigraphy". International Commission on Stratigraphy (ICS). Archived from the original on 28 July 2018.
  2. Jackson, Juia A., ed. (1997). Glossary of Geology (4th ed.). Alexandria, Virginia: American Geological Institute. ISBN   978-0-922152-34-6.
  3. Schoch, Robert M. (1989). Stratigraphy: Principles and Methods. New York: Van Nostrand Reinhold. p. 351. ISBN   978-0-442-28021-5.
  4. Fastovsky, David E.; Weishampel, David B. (1996). The Evolution and Extinction of the Dinosaurs. Cambridge, England: Cambridge University Press. pp. 22–23. ISBN   978-0-521-44496-5.
  5. Smith, Joshua B.; Lamanna, Matthew C.; Lacovara, Kenneth J.; Dodson, Peter Jr.; Poole, Jason C.; Smith, Jennifer R.; Giegengack, Robert; Attia, Yousry (2001). "A Giant Sauropod Dinosaur from an Upper Cretaceous Mangrove Deposit in Egypt" (PDF). Science. 292 (5522): 1704–1706. Bibcode:2001Sci...292.1704S. doi:10.1126/science.1060561. ISSN   1095-9203. PMID   11387472. S2CID   33454060.
  6. Salvador, Amos, ed. (1994). "Chapter 9. Chronostratigraphic Units". Stratigraphic Guide (Second (abridged) ed.). International Commission on Stratigraphy. Archived from the original on 12 June 2020.