Elder Mill, Romiley

Last updated

Elder Mill
Elder Mill, Romiley Marple 0002.png
Greater Manchester UK location map 2.svg
Red pog.svg
Location in Greater Manchester
Cotton
Spinning (ring mill)
Location Romiley, Stockport, Greater Manchester
Serving canal Peak Forest Canal
Further ownership
Coordinates 53°24′41″N2°05′47″W / 53.4114°N 2.0963°W / 53.4114; -2.0963 Coordinates: 53°24′41″N2°05′47″W / 53.4114°N 2.0963°W / 53.4114; -2.0963
Construction
CompletedLate 19th century
Power
Engine maker Daniel Adamson
Engine type600hp
Valve Gearvertical cross compound engine
Cylinder diameter and throw3ft
rpm106
Installed horse power (ihp)600hp
Flywheel diameter16ft
References
[1]

Elder Mill, Romiley was a cotton spinning mill in Romiley, Stockport, Greater Manchester. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964.

Contents

Location

Romiley, or Chadkirk is a village within the Metropolitan Borough of Stockport, in Greater Manchester, England, located 7.9 miles (12.7 km) south east of Manchester, 5.1 kilometres (3.2 mi) east of Stockport and 4 kilometres (2.5 mi) south of Hyde. It comprises 1,089 acres (4.41 km2); the surface is undulated, the soil clay, with a little sand. Coal is found at a great depth, but is not wrought; and there is a stone-quarry. Several large cotton-mills are in operation. The River Etherow here took the name of the River Mersey though today it is considered that the Etherow is a tributary of the River Goyt. The Peak Forest Canal and the Sheffield and Heybridge tramway, passed through the area. [2] Elder mill was situated by the Peak Forest Canal near the Hatherlow Mills.

History

This stretch of the Goyt, shares much of it history with Stockport whose textile tradition started with the silk industry in the late 17th Century. By the 18th century the manufacture of silk was dominating the economic life of the town. Large silk mills, such as Carrs Mill, Park Mill and Adlington Square Mill, became the major employers of the town. By 1769 nearly 2,000 people were employed in the town's silk trade. In 1772 the silk industry was in depression and the town turned to cotton. [3] Chadkirk was known for bleaching, where finished cloth was left stretched over tenter frames over the landscape. It was bleached by the sun. Clues to this activity can be found in the place names; place names such as whitehill or whitefield. Though an important early milltown Stockport was very late in embracing the joint stock limited liability company boom. The first mill to be financed by that method was Vernon Mill. Elder Mill was such a late nineteenth century mill.

The industry peaked in 1912 when it produced 8 billion yards of cloth. The Great War of 1914–1918 halted the supply of raw cotton, and the British government encouraged its colonies to build mills to spin and weave cotton. The war over, Lancashire never regained its markets. The independent mills were struggling. The Bank of England set up the Lancashire Cotton Corporation in 1929 to attempt to rationalise and save the industry. [4] Elder Mill, Romiley was one of 104 mills bought by the LCC, and one of the 53 mills that survived through to 1950.

Architecture

Power

Elder Mill was powered by a 600 hp (450 kW) vertical cross compound engine by Daniel Adamson, installed in 1937. It had a 3 ft (0.91 m) stroke. It ran at 106 rpm. The flywheel was 16 ft (4.9 m). [5]

Owners

See also

Related Research Articles

Magnet Mill, Chadderton is a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built by the Magnet Mill Ltd. in 1902, but purchased by the Lancashire Cotton Corporation in 1935. It was later taken over by the Courtaulds Group. Ceasing textile production in December 1966, it was demolished soon after. A suburban residential estate now occupies this site. It was driven by a 2200 hp twin tandem compound engine by George Saxon & Co, Openshaw, 1903. It had a 27-foot flywheel with 35 ropes, operating at 64½ rpm.

Arkwright Mill, Rochdale Cotton mill in Greater Manchester, England

Arkwright Mill, Rochdale is a cotton spinning mill in Rochdale, Greater Manchester. It was built in 1885 by the Arkwright Cotton Spinning Co. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. It was located next to Dale Mill on Roch Street. The ring and doubling frames were made by Howard & Bullough, Accrington. The mill closed in 1980, was demolished in 2007 and the land redeveloped for housing.

Century Mill, Farnworth Cotton spinning mill in Bolton, Greater Manchester, England

Century Mill, Farnworth is a former cotton spinning mill in Farnworth, Bolton, Greater Manchester, England which was built in the early 20th century for ring spinning. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. The 6,674.00-square-metre (71,838.3 sq ft) building is still in use for various other purposes in 2016.

Fox Mill

Fox Mill, Hollinwood is a cotton spinning mill in Hollinwood, Oldham, Greater Manchester. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964.

Palmer Mills, Stockport were cotton spinning mills in Portwood, Stockport, Greater Manchester. Built in the late 19th century, It was taken over by the Lancashire Cotton Corporation in the 1930s and sold on. Renamed the Stockport Paper Mill they survived into the 21st century when they were demolished to be replaced by modern businesses.

Vernon Mill, Stockport Cotton mill in Greater Manchester, England

Vernon Mill, Stockport is a former cotton spinning mill in Portwood, Stockport, Greater Manchester, England. Built in 1881, it was taken over by the Lancashire Cotton Corporation in 1930 and later sold on. Although still in business use, it is now a grade II listed building.

Welkin Mill, Lower Bredbury Cotton spinning mill in Stockport, Greater Manchester, England

Welkin Mill, Lower Bredbury is a cotton spinning mill in Lower Bredbury/Portwood, Stockport, Greater Manchester. It was built in the early years of the 20th century for ring spinning. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1967. The 162,000 sq ft (15,100 m2), four-storey mill occupies a 5.15 acres (2.08 ha) site on Welkin Road.

Wilton Mill, Radcliffe Cotton mill in Greater Manchester, England

Wilton Mill, Radcliffe was a cotton spinning mill in Radcliffe, Bury, Greater Manchester. It was built in 1907 and was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished, it was used by the East Lancashire Paper Company but has now been demolished leaving an empty site next to the railways and the River Irwell.

Stalybridge Mill, Stalybridge Cotton mill in Greater Manchester, England

Stalybridge Mill, Stalybridge is a cotton spinning mill in Stalybridge, Tameside, Greater Manchester, England. It was built in 1868, and the engine reconfigured in around 1925. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964.

Pilot Mill, Bury Cotton mill in Greater Manchester, England

Pilot Mill, Bury is a four-storey cotton spinning mill in Bury, Greater Manchester, England. It was built in 1905. It was taken over by the Lancashire Cotton Corporation in 1939 and passed to Courtaulds in 1964. Production finished, it survived and as of 2010 it was in use by Antler Luggage. The Mill is currently occupied by Baum Trading Ltd and Metzuyan Ltd they have opened a retail outlet with an on site cafe.

Kent Mill, Chadderton

Kent Mill, Chadderton was a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1908 It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1991 and it was demolished in 1994.

Manor Mill, Chadderton Cotton mill in Greater Manchester, England

Manor Mill, Chadderton is an early twentieth century, five storey cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1906. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1990.

Monton Mill, Eccles Cotton spinning mill in Eccles, Greater Manchester, UK

Monton Mill was a cotton spinning mill in Eccles, Greater Manchester, England, built in 1906. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. After production ended, it was demolished and replaced with housing; its name is preserved in the street name.

Heron Mill, Hollinwood Cotton spinning mill in Oldham, Greater Manchester, England

Heron Mill is a cotton spinning mill in Hollinwood, Oldham, Greater Manchester. It was designed by architect P. S. Stott and was constructed in 1905 by the Heron Mill Company Ltd next to Durban Mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1960, and it was used by Courtaulds for offices, warehousing, and some experimental fabric manufacture. Courtaulds occupation ended in 1994.

Textile Mill, Chadderton Cotton mill in Greater Manchester, England

Textile Mill, Chadderton was a cotton spinning mill in Chadderton, Oldham, Greater Manchester, England. It was built in 1882 by Potts, Pickup & Dixon for the Textile Mill Co. Ltd, and closed in 1927. It was taken over by the Lancashire Cotton Corporation in the late 1940s and passed to Courtaulds in 1964 and used for cotton waste sorting. Half of the building was destroyed by fire on 11 July 1950, but the remaining section continued to be used for cotton waste sorting by W. H. Holt and Son until 1988.

Malta Mill, Middleton Cotton mill in Greater Manchester, England

Malta Mill, Middleton is a former cotton spinning mill in the Mills Hill area of Chadderton, Greater Manchester. It lies alongside the Rochdale Canal. It was built in 1904 as a new mule mill, by F. W. Dixon The engine stopped in 1963. The building still stands.

Laurel Mill, Middleton Junction Former cotton mill in Manchester, England

Laurel Mill was a cotton spinning mill in the Mills Hill/Middleton Junction area of Chadderton, Oldham, Greater Manchester, England.

Harp Mill, Castleton Cotton mill in Greater Manchester, England

Harp Mill was a former cotton spinning mill in the Castleton, Rochdale, Greater Manchester, England. Queensway, Castleton was a hub of cotton mills including the three 't', Th'Arrow, Th'Harp, and Th'Ensor. The 1908 Castleton map includes: Marland Cotton Mill, Castleton Cotton Mill, Globe Works, Arrow Cotton Mill, Harp Cotton Mill, Globe Leather Works, Castleton Size Works and Castleton Iron Works. Th'Harp was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. The site now houses industrial units.

Kingston Mill, Stockport Cotton spinning mill in Greater Manchester, England

Kingston Mill, Stockport is a mid nineteenth century cotton spinning mill in Edgeley, Stockport, Greater Manchester, England. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished, it was made over to multiple uses.

Empress Mill, Ince Cotton mill in Greater Manchester, England

Empress Mill, Ince was a single storey shed mill alongside the Leeds and Liverpool Canal, spinning cotton in Ince, Wigan, Greater Manchester, England. It was acquired by the Lancashire Cotton Corporation in 1930, and passed to Courtaulds in 1964. Production ceased in 1975. It was the last mill in Ince to close, despite the intervention of Member of Parliament Michael McGuire, and a debate in the House of Commons on 20 March 1975.

References

  1. The mills and organisation of the Lancashire Cotton Corporation Limited. Blackfriars House, Manchester: Lancashire Cotton Corporation Limited. 1951.
  2. "Roehampton - Romsey | British History Online".
  3. "The mills are gone but they have left a legacy of industry". Stockport Express. 11 November 2002.
  4. Dunkerley, Philip (2009). "Dunkerley-Tuson Family Website, The Regent Cotton Mill, Failsworth". Archived from the original on 23 March 2008. Retrieved 9 January 2009.
  5. Roberts, A S (1921), "Arthur Robert's Engine List", Arthur Roberts Black Book., One guy from Barlick-Book Transcription, archived from the original on 23 July 2011, retrieved 11 January 2009