| GCR Class 11E LNER Class D10 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 No. 2652 Edwin A. Beazley at Northwich MPD in 1947 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The GCR Class 11E was a type of 4-4-0 steam locomotive used by the Great Central Railway for express passenger services. Ten were built in the railway's own workshops at Gorton, Manchester during 1913; they remained in service until the mid-1950s.
In the early part of the 20th century, the Great Central Railway (GCR) had favoured the 4-4-0 wheel arrangement for express passenger services. They had bought 40 such locomotives to the design of their Locomotive Engineer, John G. Robinson (Robinson became Chief Mechanical Engineer in 1902), between 1901 and 1904, and these formed Class 11B. These were found to be too small, and subsequently several classes of 4-4-2 and 4-6-0 locomotive were introduced for express passenger trains, with the 4-4-2 type predominating. After the Class 1 4-6-0, which were larger than any of the others, proved disappointing, Robinson decided to reduce the size of these and designed a 4-4-0 which became Class 11E. Ten were built in 1913, [1] and were immediately successful.
Compared to the Class 1 4-6-0, the omission of one coupled axle allowed a longer wheelbase between two adjacent axles of a 4-4-0 than with the 4-6-0, so the firebox could be positioned between the axles instead of on top of one of them; thus it could be deeper, giving better draughting which aided steaming. The shorter overall length meant that the boiler tubes were shorter, which also improved draughting. [2]
Unusually, outside admission was used for the piston valves of the cylinders. [3] Conventionally, piston valve locomotives had inside admission, whereas outside admission was used with slide valve locomotives. Outside admission gives a shorter exhaust passage, with the consequent advantages of a lower back pressure and sharper blast, but with the disadvantage that the valve spindle glands must be made to withstand much higher pressures and temperatures. Robinson had previously used outside admission for his Class 11D rebuilds from Class 11B, and the new class 11E used the same cylinder casting as those rebuilds. [4] When further 4-4-0s of similar capability to class 11E were required after World War I, these were given normal cylinders with inside admission for the piston valves, and so were placed in Class 11F. [5]
Withdrawal occurred between March 1953 and November 1955. [5]
On 27 February 1927, locomotive No. 5437 Prince George was hauling an express passenger train that was involved in a collision with a light engine at Penistone, Yorkshire. [6]
| Number | Built | Name | Withdrawn |
|---|---|---|---|
| 429 | August 1913 | Sir Alexander Henderson | February 1954 |
| 430 | September 1913 | Purdon Viccars | March 1953 |
| 431 | October 1913 | Edwin A. Beazley | May 1954 |
| 432 | October 1913 | Sir Edward Fraser | October 1955 |
| 433 | October 1913 | Walter Burgh Gair | August 1953 |
| 434 | November 1913 | The Earl of Kerry | August 1953 |
| 435 | November 1913 | Sir Clement Royds | January 1955 |
| 436 | November 1913 | Sir Berkeley Sheffield | March 1953 |
| 437 | November 1913 | Charles Stuart Wortley | August 1955 |
| 438 | December 1913 | Worsley Taylor | November 1954 |
The original names were those of directors of the GCR; Sir Alexander Henderson was the chairman of the board, and William Purdon Viccars was deputy chairman. At the time, there were twelve members of the GCR Board; of these, two (Viscount Cross and Sir Alexander Henderson) already had locomotives named after them. However, the latter's name was removed from Class 11B No. 1014 and used on Class 11E No. 429, so one director was not honoured at this stage; [7] this was rectified the following year when Class 1A 4-6-0 No. 439 was named Sutton Nelthorpe. [8]
Two locomotives had their names altered subsequently, one of them twice. Sir Alexander Henderson was created Baron Faringdon in 1916, but his new name was used on a Class 9P 4-6-0, so in 1917 No. 429 was renamed Sir Douglas Haig after the Commander-in-Chief of the British Expeditionary Force. In turn, Sir Douglas was created Earl Haig in 1919 and his new name used on another Class 9P 4-6-0, so No. 429 was renamed a second time, becoming Prince Henry c. 1920 after the fourth child of King George V. When Charles Stuart-Wortley was raised to the peerage as Baron Stuart of Wortley in 1917, his name was used on a further class 9P, so no. 437 was renamed Prince George c. 1920 after the fifth child of King George V. [9]
After the 1923 Grouping, the LNER increased the GCR numbers by 5000, this occurring in 1924–5. Under the 1946 renumbering, they became 2650–9 in the same order. During 1948–50, British Railways increased these numbers by 60000. [10]
John George Robinson CBE, was an English railway engineer, and was chief mechanical engineer of the Great Central Railway from 1900 to 1922.
The Great Central Railway Class 11F or Improved Director Class is a class of 4-4-0 steam locomotive designed by John G. Robinson for passenger work. The LNER classified them as Class D11 from 1923. They were based on the earlier GCR Class 11E "Director" class.
The GER Class L77, LNER Class N7, is a class of 0-6-2T steam locomotives. They were designed by Alfred John Hill of the Great Eastern Railway and introduced in 1915. The design was perpetuated by Nigel Gresley of the LNER after the 1923 grouping. 134 were built and one example is preserved.
Alexander Henderson, 1st Baron Faringdon, known as Sir Alexander Henderson, 1st Baronet, from 1902 to 1916, was a British financier and Liberal Unionist Member of Parliament.
The North Eastern Railway Class S was a 4-6-0 type of steam locomotive designed for express passenger workings. The first example was built in 1899. They were very similar to the NER Class S1, except for the smaller wheels of the former.
The GCR Class 1 was a class of steam locomotives designed by John G. Robinson for the Great Central Railway, and introduced to service between December 1912 and 1913. In the 1923 grouping, they all passed to the London and North Eastern Railway which placed them in class B2. Their classification was changed to B19 in 1945, and all had been retired by the end of 1947.
A war memorial locomotive is a locomotive dedicated as a war memorial and usually given an appropriate name. The following examples come from Britain and the First World War:
The London and North Eastern Railway (LNER) Thompson Class A2/1 was a class of 4-6-2 steam locomotives built at Darlington locomotive works during 1944. They were originally ordered as Class V2 locomotives, as designed by Sir Nigel Gresley, but were revised during construction into a 4-6-2 'Pacific' arrangement under the instruction of Edward Thompson.
The Great Central Railway (GCR) Class 8A was a class of 0-8-0 steam locomotive built between 1902 and 1911 for handling heavy coal trains over the Pennines. They all passed to the LNER in 1923, who redesignated them Class Q4. They were withdrawn from service between 1934 and 1951.
The GCR Class 1B was a class of 2-6-4T (tank) locomotives on the Great Central Railway. They were notable as the first locomotives of the 2-6-4T wheel arrangement to be used by a British standard-gauge railway; there had been two narrow-gauge examples on the Leek & Manifold Valley Light Railway since 1904.
Although overshadowed by the later and more famous steam locomotives that John G. Robinson would go on to design, the Great Central Railway Class 11B 4-4-0 Express Passenger engines were a successful class which totalled 40. Built from 1901 to 1903, in later rebuilt form as 11D, some 11Bs would last in service until 1950. Railwaymen continued to refer to the class as "11B" even after all were rebuilt to 11D. Being contemporary with and to some extent the 4-4-0 version of Robinson's much more numerous 0-6-0 goods class 9J, which were known as "Pom-Poms", the 11Bs acquired the nickname "Pom-Pom Bogies". The London & North Eastern Railway classified the 11Bs, along with their 11C and 11D rebuilds, as Class D9.
GCR Classes 8D and 8E were two pairs of three-cylinder compound steam locomotives of the 4-4-2 wheel arrangement built in 1905 and 1906 for the Great Central Railway.
The GCR Class 9Q, classified B7 by the LNER, was a class of 4-6-0 mixed traffic locomotives designed by John G. Robinson for fast goods, relief passenger and excursion services on the Great Central Railway. They were a smaller wheeled version of Robinson's earlier Class 9P "Lord Faringdon" express passenger class.
The Great Central Railway Class 1A, classified B8 by the LNER, was a class of 4-6-0 mixed-traffic locomotives designed by John G. Robinson for fast goods, relief passenger and excursion services. They were known as the ‘Glenalmond Class’ and were a smaller wheeled version of Robinson's earlier Sir Sam Fay express passenger class, which they closely resembled.
The Great Central Railway (GCR) Class 9A was a class of 0-6-2T steam locomotive built between 1889 and 1892. From 1923 the locomotives were redesignated Class N4.
The GCR Class 8C was a class of a pair of 4-6-0 locomotives built for the Great Central Railway in 1903–1904 by Beyer, Peacock and Company. They passed to the London and North Eastern Railway at the 1923 grouping and received the classification B1 They were reclassified B18 in 1943 and both were retired in 1947.
GCR Class 8G was a class of 10 two-cylinder steam locomotives of the 4-6-0 wheel arrangement built in 1906 for the Great Central Railway.
GCR Class 9P was a design of four-cylinder steam locomotive of the 4-6-0 wheel arrangement built for hauling express passenger trains on the Great Central Railway in England. A total of six were built: one in 1917, and five in 1920. They were sometimes known as the Lord Faringdon class, from the name of the first one built.
The GCR Class 8F was a class of ten 4-6-0 locomotives built for the Great Central Railway in 1906 by Beyer, Peacock and Company to the design of John G. Robinson for working fast goods and fish trains. They passed to the London and North Eastern Railway at the 1923 grouping and received the classification 'B4'.
The Great Central Railway Class 8N - London North Eastern Railway Class B6 - was a class of three 4-6-0 steam locomotives, designed by John G. Robinson in 1918. They were a mixed traffic class. All three examples were withdrawn in November and December 1947.
