NER Class P3

Last updated

NER Class P3
LNER Class J27
South Blyth locomotive depot.jpg
A Class J27 locomotive at the coaling stage outside South Blyth shed
Type and origin
Power typeSteam
Designer Wilson Worsdell
Builder
Serial number
  • NBL: 18355–18374
  • BP: 5104–5123
  • RS: 3352–3361
Build date1906–1923
Total produced115
Specifications
Configuration:
   Whyte 0-6-0
   UIC C n2, C h2
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.4 ft 7+14 in (1.403 m)
Length51 ft 11+18 in (15.827 m) over buffers
Axle load 17 long tons 18 cwt (18.2 t)
Loco weight47–49.5 long tons (47.8–50.3 t; 52.6–55.4 short tons)
Tender weight36.95 long tons (37.54 t; 41.38 short tons)
Fuel type Coal
Fuel capacity5 long tons 0 cwt (5.1 t)
Water cap.3,038 imp gal (13,810 L; 3,648 US gal)
Firebox:
  Firegrate area
20 sq ft (1.9 m2)
Boiler pressure180 lbf/in2 (1.2 MPa)
Cylinders Two, inside
Cylinder size 18+12 in × 26 in (470 mm × 660 mm)
Performance figures
Tractive effort 24,640 lbf (109.6 kN)
Career
Operators
DispositionOne preserved, remainder scrapped

The North Eastern Railway (NER) Class P3, classified J27 by the LNER, is a class of 0-6-0 steam locomotive. The P3 Class was designed by Wilson Worsdell and was a relatively minor modification of the existing North Eastern Railway Class P2 (LNER Class J26). The most significant change was a deeper firebox with shallower sloping fire grate. This was achieved by raising the boiler slightly, and by reducing the clearance between the firebox and the rear axle. The P3 Class were a freight engine by nature and used for hauling long trains of freight.

Contents

Construction

Initially eighty J27s were built between 1906 and 1909 in five batches, distributed amongst the NER's Darlington Works, North British Locomotive Company, Beyer, Peacock and Company, and Robert Stephenson and Company. Twelve years later, a batch of twenty five J27s were built at Darlington with Schmidt superheaters and piston valves. These were delivered in 1921-2 and were followed by a final order of ten placed in December 1922 and built by the LNER at Darlington Works in 1923. The superheated J27s could be identified by their extended smokeboxes.

Post-war

After World War II, the J27s stopped hauling goods trains but they continued to haul heavy mineral trains. Withdrawals began in March 1959, but in June 1966 thirty-six were still putting in hard work hauling coal in County Durham and South Northumberland. The final J27s were withdrawn from the Blyth area where they operated the short trip workings between the nearby coalfield and shipping staithes. The last J27 was withdrawn in September 1967. The last four in active service were No. 65811, No. 65879, No. 65882, and No. 65884. [1]

Accidents and incidents

Preservation

Restoration

One, BR 65894, has survived to preservation and was purchased directly from BR by the North Eastern Locomotive Preservation Group on 1 December 1966. There then followed restoration to full working order, initially at Tyne Dock where the locomotive was stored after withdrawal, then professionally at the then still functioning National Coal Board workshops at Philadelphia, Tyne and Wear, and then at Thornaby Depot. Final restoration, including the fitting of vacuum brake and steam heating apparatus for working passenger trains, was by the group's volunteers at ICI Billingham.

Appearances

2392 in the S&D 150 cavalcade NER P3 2392.jpg
2392 in the S&D 150 cavalcade

The locomotive, fully restored as NER class P3 No. 2392, was delivered to the embryonic North Yorkshire Moors Railway in October 1971. The locomotive provided the mainstay of services in the period leading up to full re-opening of the line, when it piloted Lambton Collieries Tank No. 29 on the Royal Re-opening Special of 1 May 1973. Following its appearance as an exhibit at the Stockton and Darlington 150 celebrations and cavalcade, [4] it was withdrawn for boiler repairs. From 1977 until early 1982 it was on display in the National Railway Museum at York. After a further overhaul, 2392 returned to traffic on the N.Y.M.R. in the autumn of 1984. The engine then received another overhaul during the 1990s, resteaming in 1996 in BR Black livery as 65894, before reverting to NER livery in Autumn 2003. During these periods in operation, the loco saw use on the Keighley and Worth Valley Railway, Bo'ness and Kinneil Railway, the Llangollen Railway, the North Norfolk Railway, the Embsay and Bolton Abbey Steam Railway, the East Lancashire Railway, and the Weardale Railway alongside occasional use at the NYMR. The engine was again withdrawn for overhaul in May 2006 at the Darlington Railway Museum, where it initially went on display for two years before work on a further overhaul started.

Current status

The engine is still owned by the North Eastern Locomotive Preservation Group, and is currently at the North Yorkshire Moors Railway (NYMR) having been transferred from the NELPG's Hopetown (Darlington) works for the final stages of its most recent overhaul, partly funded by a Heritage Lottery Fund grant. The loco's overhaul was recently[ when? ] completed and 65894, in BR black livery, re-entered service on the NYMR in May 2018, following a lengthy 12 year restoration period. It visited The Wensleydale Railway in 2018 & 2019.[ citation needed ]

Related Research Articles

Sir Vincent Litchfield Raven, KBE was an English railway engineer, and was chief mechanical engineer of the North Eastern Railway from 1910 to 1922.

The London and North Eastern Railway (LNER) produced several classes of locomotive, mostly to the designs of Nigel Gresley, characterised by a three-cylinder layout with a parallel boiler and round-topped firebox. It produced the most famous locomotive of its day, 4468 'Mallard', the holder of the world steam locomotive speed record. It also built the world-famous 4472 'Flying Scotsman'. However, its locomotive inheritance was much greater than just the 'A4 Class', it also produced highly successful mixed-traffic and freight designs.

<span class="mw-page-title-main">BR Standard Class 4 2-6-0</span> Class of 115 two-cylinder 2–6-0 locomotives

The BR Standard Class 4 2-6-0 is a class of steam locomotive designed by Robert Riddles for British Railways (BR). 115 locomotives were built to this standard.

<span class="mw-page-title-main">GER Class Y14</span> Class of 0-6-0 mixed traffic locomotives built by the Great Eastern Railway

The Great Eastern Railway (GER) Class Y14 is a class of 0-6-0 steam locomotive. The LNER classified them J15.

<span class="mw-page-title-main">Darlington Works</span> Railway Engineering Works

Darlington Works was established in 1863 by the Stockton and Darlington Railway in the town of Darlington in the north east of England. The main part of the works, the North Road Shops was located on the northeast side of the Stockton and Darlington Railway

<span class="mw-page-title-main">NER Class C1</span>

The North Eastern Railway (NER) Class C1, was a class of 0-6-0 freight locomotives designed by T.W. Worsdell. They were used throughout the NER system, although particularly in Teesside between 1886 and 1962.

<span class="mw-page-title-main">NER Class T2</span>

The North Eastern Railway Class T2, classified as Class Q6 by the LNER, is a class of 0-8-0 steam locomotive designed for heavy freight, especially for hauling long coal trains to various collieries in the North Eastern region of the UK, with a maximum speed of 40 miles per hour. 120 were built at Darlington Works and Armstrong Whitworth between 1913 and 1921 to the design of Vincent Raven, based on the NER Class T and T1. The batch of fifty built by Armstrong Whitworth from 1919 were A-W's first locomotives to be built, after the conversion of their Scotswood works from ordnance to peacetime production.

<span class="mw-page-title-main">NER Class H</span>

The North Eastern Railway (NER) Class H, classified as Class Y7 by the London and North Eastern Railway (LNER) is a class of 0-4-0T steam locomotives designed for shunting.

<span class="mw-page-title-main">NER Class E1</span> Class of 0-6-0T locomotives designed by Wilson Worsdell

The North Eastern Railway Class E1, classified as Class J72 by the London and North Eastern Railway (LNER), is a class of small 0-6-0T steam locomotives designed by Wilson Worsdell for shunting. They had inside cylinders and Stephenson valve gear.

<span class="mw-page-title-main">NER Class E</span> Class of 0-6-0T locomotives designed by Thomas Worsdell

The North Eastern Railway (NER) Class E, classified as Class J71 by the London and North Eastern Railway (LNER), was a class of small 0-6-0T steam locomotive designed by T.W. Worsdell. They had inside cylinders and Stephenson valve gear and were the basis for the later NER Class E1.

<span class="mw-page-title-main">NER Class M1</span>

The North Eastern Railway Class M1 is a class of 4-4-0 steam locomotive, designed by Wilson Worsdell. 20 initial engines were built, then 30 further units were built, designated Class Q.

<span class="mw-page-title-main">NER 901 Class</span>

The NER 901 Class was a class of 2-4-0 steam locomotive of the North Eastern Railway, designed by Edward Fletcher. Between 1872 and 1882 55 of the class were built for the NER.

The North Eastern Locomotive Preservation Group (NELPG) was formed in 1966 with the intention of preserving some of the steam locomotives then still working on regular goods or passenger trains in North East England. At the time of its formation, its first president was Wilbert Awdry, the author of The Railway Series books and the creator of Thomas the Tank Engine. Now the group owns four unique North Eastern steam locomotives, its aim is to have as many of its steam locomotives running on the main line or preserved lines as possible. In 2014, the LNER K1 (62005) ran on the North Yorkshire Moors Railway and on the Jacobite service in Scotland. The LNER Q6 was undergoing boiler repairs at the start of the season but finished the season on the North Yorkshire Moors Railway and the LNER J72 ran on the Wensleydale Railway. The group have two workshops, one at Hopetown Carriage Works, Darlington and another workshop and base at Grosmont, the northernmost station on the North Yorkshire Moors Railway. The shed at Grosmont is called deviation shed. Members of the group hold regular evening meetings to discuss railway subjects, have a membership newsletter, and have produced various publications. The group now also has a junior volunteers section, training young recruits at, mainly, the NYMR and Deviation Shed. These JVs will help with mainly the locomotives, although a small amount has been done on the carriages.

The North Eastern Railway (NER) Bogie Tank Passenger (BTP) locomotives were designed by Edward Fletcher in 1873. The locomotives were for hauling passenger services on branch lines. They had an 0-4-4 wheel layout and a total of 124 locomotives were built. They were designated G6 by the London and North Eastern Railway (LNER).

<span class="mw-page-title-main">NER Class Y</span>

The North Eastern Railway (NER) Class Y 4-6-2T tank locomotives were designed whilst Wilson Worsdell was Chief Mechanical Engineer, but none were built until 1910 by which time Vincent Raven had taken over.

The NER Class P1 was a class of 0-6-0 steam locomotives of the North Eastern Railway. Class P1 was a development of Class P, having a boiler four inches longer, and a firebox six inches longer. To accommodate these, the wheelbase was increased by nine inches. The cylinder stroke was also increased by two inches. None survived into preservation

<span class="mw-page-title-main">NER Class 290</span>

The NER Class 290 was a class of 0-6-0T steam locomotives of the North Eastern Railway (NER), rebuilt from an earlier class of 0-4-4T, the NER Bogie Tank Passenger.

<span class="mw-page-title-main">GER Class M15</span>

The GER Class M15 was a class of 160 2-4-2T steam locomotives designed by Thomas William Worsdell and built for the Great Eastern Railway between 1884 and 1909. The original (F4) class of locomotives were fitted with Joy valve gear which was notoriously difficult to 'set'. This earned them the nickname of 'Gobblers' thanks to their high coal consumption rates. As a result, between 1911 and 1920, 32 of them were rebuilt by James Holden with Stephenson valve gear and higher pressure boilers. Despite this, the nickname stuck for many years after.

<span class="mw-page-title-main">NER Class V</span> Class of 20 British 4-4-2 locomotives

The NER Class V was a class of twenty steam locomotives of the 4-4-2 wheel arrangement. They were designed by Wilson Worsdell for the North Eastern Railway (NER) as express passenger locomotives.

References

  1. "View Photos of J27 Class 0-6-0 Steam Locos" . Retrieved 13 July 2019.
  2. Hoole, Ken (1983). Trains in Trouble: Vol. 4. Truro: Atlantic Books. p. 11. ISBN   0-906899-07-9.
  3. Hoole, Ken (1982). Trains in Trouble: Vol. 3. Redruth: Atlantic Books. p. 43. ISBN   0-906899-05-2.
  4. Rail 150 Exhibition Grand Steam Cavalcade Souvenir Guide. Joint Committee for Stockton & Darlington Railway 150 Celebrations. 1975. p. Supplement.