| NER Class C1 LNER Class J21 | |||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 65078 at Wearhead Station | |||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||
The North Eastern Railway (NER) Class C1, was a class of 0-6-0 freight locomotives designed by T.W. Worsdell. They were used throughout the NER system, although particularly in Teesside between 1886 and 1962.
Thirty examples were built at Gateshead between 1886 and 1894, but after 1900 171 examples of the similar Class C compound locomotives were converted to simple operation and added to the class. The whole class was then re-designated as Class C and were numbered between 16 and 1820.
All 201 of the class passed into the London and North Eastern Railway ownership in 1923, and they were classified J21 but without any sub-classes to reflect the different backgrounds or dimensions. The class retained their original North Eastern Railway numbers under the 1924 renumbering scheme. Withdrawal of the class began in 1929, but proceeded relatively slowly and there were still substantial numbers in service in 1943 when the survivors were renumbered between 5025 and 5123' (with gaps). Eighty-two surviving examples passed into British Railways (BR) ownership in 1948, and renumbered by adding 60000 to their exiting numbers. These were gradually withdrawn from service over the next fourteen years.
The mechanical history of the class is very complex, and both Wilson Worsdell and Vincent Raven made changes to the class. All the Class C compounds were rebuilt as Class C1 simple. Many examples were later rebuilt with a superheater and others had the original Joy valve gear replaced with piston valves and Stephenson valve gear. [1] Some locos were further rebuilt with superheaters, 19 inch bore cylinders, piston valves and Stephenson valve gear. The superheaters were later removed from some of these locomotives.
One example, (then numbered 876) was withdrawn in November 1939, but as a result of the onset of war was subsequently repaired and re-instated. It survived as BR 65033 until 1962. The locomotive was then purchased in 1972 for use at the newly established Beamish Museum. [2]
It was used from 1975, pulling the restored NER Coach and the restored NER wagons between the Colliery Sidings and Station, until 1984 when it was declared unfit to run due to the boiler certificate running out. It then languished in the station yard, with No 14 (Hawthorn Leslie) or the Diesel shunter moving it to keep the motion from seizing up on occasion. It was on static display until 2004/2005 when it was removed to the North Norfolk Railway for restoration to steam in 2007.
It is currently at the National Railway Museum Shildon preserved by the Locomotive Conservation & Learning Trust who have owned it since 2011 pending restoration to working order at Kirkby Stephen East station, home of the Stainmore Railway Company. It was announced in July 2017 that the Heritage Lottery Fund bid between the Stainmore Railway Company and the Locomotive Conservation and Learning Trust, to restore both LNER J21 65033 and an ex. North Eastern Railway stores van, no. 5523, as an interpretation vehicle to travel with the locomotive, had been successful. [3] The locomotives overhaul has begun, and after completion it shall move to the Stainmore Railway Company's headquarters.
65099 was a candidate for preservation, but it was scrapped in 1961. [4]
The North Eastern Railway (NER) Class P3, classified J27 by the LNER, is a class of 0-6-0 steam locomotive. The P3 Class was designed by Wilson Worsdell and was a relatively minor modification of the existing North Eastern Railway Class P2. The most significant change was a deeper firebox with shallower sloping fire grate. This was achieved by raising the boiler slightly, and by reducing the clearance between the firebox and the rear axle. The P3 Class were a freight engine by nature and used for hauling long trains of freight.
The North Eastern Railway Class S3, classified B16 by the LNER, was a class of 4-6-0 steam locomotive designed for mixed traffic work. It was designed by Vincent Raven and introduced in 1920. The earlier members of this class were fitted with Westinghouse Brakes - all of this equipment was removed during the 1930s.
The GER Class L77, LNER Class N7, is a class of 0-6-2T steam locomotives. They were designed by Alfred John Hill of the Great Eastern Railway and introduced in 1915. The design was perpetuated by Nigel Gresley of the LNER after the 1923 grouping. 134 were built and one example is preserved.
The North Eastern Railway Class E1, classified as Class J72 by the London and North Eastern Railway (LNER), is a class of small 0-6-0T steam locomotives designed by Wilson Worsdell for shunting. They had inside cylinders and Stephenson valve gear.
The North Eastern Railway (NER) Class E, classified as Class J71 by the London and North Eastern Railway (LNER), was a class of small 0-6-0T steam locomotive designed by T.W. Worsdell. They had inside cylinders and Stephenson valve gear and were the basis for the later NER Class E1.
Stainmore Railway Company is a volunteer-run, non-profit preservation company formed in 2000 with the aim of restoring Kirkby Stephen East railway station in Kirkby Stephen, Cumbria, England. In 1997 a company called Stainmore Properties Ltd. was formed, with the intention to convert KSE into an authentic North Eastern Railway focused heritage centre representing the early 1950s. The Stainmore Railway Company was subsequently formed to restore the site. Since then essential repairs have been made to the roof and station, a number of rooms have been restored and a short section of track has been laid along the formation of the old Eden Valley Railway, with some sidings and yard infrastructure within the station area and surroundings. A quantity of rolling stock that is authentic to the site has also been brought in.
The North Eastern Railway (NER) Class Y 4-6-2T tank locomotives were designed whilst Wilson Worsdell was Chief Mechanical Engineer, but none were built until 1910 by which time Vincent Raven had taken over.
The North Eastern Railway Class S was a 4-6-0 type of steam locomotive designed for express passenger workings. The first example was built in 1899. They were very similar to the NER Class S1, except for the smaller wheels of the former.
The NER Class P was a class of 0-6-0 steam locomotives of the North Eastern Railway. They were designed by Wilson Worsdell for mineral traffic.
The NER Class P1 was a class of 0-6-0 steam locomotives of the North Eastern Railway. Class P1 was a development of Class P, having a boiler four inches longer, and a firebox six inches longer. To accommodate these, the wheelbase was increased by nine inches. The cylinder stroke was also increased by two inches. None survived into preservation
The NER Class L was a class of 0-6-0T steam locomotives of the North Eastern Railway. They were a specialised design, intended for use on the Redheugh and Quayside banks on either side of the River Tyne. They were replaced on the Quayside branch by NER Class ES1 electric locomotives in 1905 but were re-allocated to other duties.
The NER Class T was a class of 0-8-0 steam locomotives of the North Eastern Railway.
The GER Class M15 was a class of 160 2-4-2T steam locomotives designed by Thomas William Worsdell and built for the Great Eastern Railway between 1884 and 1909. The original (F4) class of locomotives were fitted with Joy valve gear which was notoriously difficult to 'set'. This earned them the nickname of 'Gobblers' thanks to their high coal consumption rates. As a result, between 1911 and 1920, 32 of them were rebuilt by James Holden with Stephenson valve gear and higher pressure boilers. Despite this, the nickname stuck for many years after.
The NBR B Class is a class of 0-6-0 steam locomotive designed by William Paton Reid for freight work on the North British Railway. They were introduced in 1906 and had inside cylinders and Stephenson valve gear. The first eighteen locomotives had piston valves and the remainder had slide valves.
The NER B and B1 Classes were two classes of 0-6-2 tank locomotives designed by Thomas William Worsdell for heavy freight and mineral on the North Eastern Railway, introduced in 1886. They were tank engine versions of the NER C1 Class 0-6-0, using both simple expansion and also the von Borries configuration for two-cylinder compound locomotives. Both types were later rebuilt using superheated steam and the compounds were also rebuilt as simple expansion locomotives, and eventually formed a single class. Many of the superheated locomotives were also later returned to saturated steam as their original boilers wore out. As a result the classes have had a very complex mechanical history.
GCR Class 8B was a class of 27 two-cylinder steam locomotives of the 4-4-2 wheel arrangement built between 1903 and 1906 for the Great Central Railway. They were nicknamed "Jersey Lillies" after the famous music star Lillie Langtry.
The NER Class S1 was a class of 4-6-0 steam locomotives of the North Eastern Railway. It was designed by Wilson Worsdell and five locomotives were built between 1900 and 1901 at Gateshead works. The S1 was similar to the NER Class S but had larger driving wheels and a higher boiler pressure.
The NER Class R1 was a class of 4-4-0 steam locomotives of the North Eastern Railway. The class was designed by Wilson Worsdell and built from 1908 to 1909.
The NER Class F was a class of 4-4-0 steam locomotives of the North Eastern Railway. It was designed by Thomas William Worsdell and introduced in 1887.
The NER Class G was a class of 4-4-0 steam locomotives of the North Eastern Railway. It was designed by Thomas William Worsdell and introduced in 1887.
